1. Product Overview
The CYCLAMI Z5L is a portable electric tire inflator designed for various applications, including bicycles, motorcycles, cars, and other inflatables. It features a digital display for real-time pressure monitoring, preset inflation modes, auto start/stop functionality, and a built-in emergency LED light.
Figure 1: CYCLAMI Z5L Portable Electric Air Compressor
Video 1: CYCLAMI Z5L Air Pump Features Demonstration
2. Package Contents
Please check the package to ensure all items are present:
- CYCLAMI Z5L Electric Pump
- USB Type-C Charging Cable
- SV Extension Tube
- Presta Valve Adapter
- Ball Needle
- User Manual
Figure 2: Package Contents
3. Setup and Charging
3.1 Initial Charging
- Before first use, fully charge the pump.
- Connect the provided USB Type-C cable to the charging port on the pump and to a suitable USB power adapter (not included).
- The battery indicator on the display will show charging status. A full charge takes approximately 180 minutes.
Figure 3: Type-C Charging Port
3.2 Attaching the Air Hose and Nozzle
- Screw the SV Extension Tube securely onto the pump's air outlet.
- Select the appropriate nozzle for your inflatable item:
- SV Extension Tube: Suitable for Schrader valves (common on mountain bikes, e-bikes, motorcycles, cars).
- SV Extension Tube + Adapter: Use the Presta valve adapter for French valves (common on road bikes).
- SV Extension Tube + Balloon Needle: For inflating sports balls (soccer balls, basketballs) or swimming rings.
- Attach the selected nozzle firmly to the valve of the item you wish to inflate.
Figure 4: Multiple Accessories for Different Scenarios
4. Operating Instructions
4.1 Power On/Off
- Press and hold the power button (
) to turn the pump on or off.
4.2 Digital Display and Modes
The digital display shows real-time tire pressure and allows selection of preset modes.
Figure 5: Digital Display Screen with Preset Modes
- Mode Button (M): Press to cycle through preset inflation modes (e.g., Bicycle, Motorcycle, Car, Ball). Each mode has a default pressure setting.
- Unit Button (): Press to switch between pressure units (PSI, BAR).
- Adjust Buttons (+/-): Use to manually adjust the target pressure after selecting a mode or for custom inflation.
4.3 Inflation Process
- Turn on the pump.
- Attach the air hose with the correct nozzle to the item's valve. The display will show the current pressure.
- Select a preset mode using the 'M' button or manually set the desired pressure using the '+' and '-' buttons.
- Press the Start/Stop button () to begin inflation.
- The pump will automatically stop once the preset pressure is reached.
- Disconnect the hose from the valve.
Figure 6: Preset Tire Pressure Auto Start/Stop Function
4.4 Emergency Lighting
The pump includes a built-in LED light for emergency situations or low-light conditions.
- Press the light button (
) to turn the LED light on or off.
Figure 7: Emergency Lighting Feature
5. Maintenance
- Cleaning: Wipe the pump with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, charge the pump at least once every three months if not in regular use. Avoid completely draining the battery for extended periods.
- Nozzle Care: Keep all nozzles and adapters clean and free from debris to ensure proper sealing and inflation.
6. Troubleshooting
- Pump not turning on: Ensure the battery is charged. If not, connect to a power source using the Type-C cable.
- Pump not inflating: Check that the air hose and nozzle are securely attached to both the pump and the item's valve. Ensure the target pressure is set above the current pressure.
- Inaccurate pressure reading: Ensure the nozzle is properly sealed to the valve. Calibrate the pump if necessary (refer to the full manual for specific calibration steps, if available).
- Slow inflation: Check for any blockages in the air hose or nozzle. Ensure the battery is sufficiently charged.
- Overheat protection: The pump has built-in overheat protection. If it stops unexpectedly during prolonged use, allow it to cool down before resuming operation.
7. Specifications
| Parameter | Value |
|---|---|
| Model | Z5L |
| Maximum Pressure | 130 PSI |
| Battery Capacity | 2000*2 mAh |
| Inflation Volume | 15 L/min |
| Pressure Setting Range | 4-130 PSI |
| Charging Method | Type-C |
| Charging Time | Approx. 180 minutes |
| Dimensions (L x W x H) | 113.5 x 70 x 38.5 mm |
| Weight | Approx. 381 g |
| Valve Compatibility | AV (Schrader) / FV (Presta) |
| Material | ABS+PMMA |
| Operating Noise | Approx. 76 dB |
| Display Screen | Digital |
| Auto Standby | Yes |
Figure 8: Parameter Comparison (Z5L vs. Other Pumps)
7.1 Recommended Pressure Ranges
| Form | Product Type | Pressure Range |
|---|---|---|
| Bikes | Folding Bike | 45-50 PSI |
| 12, 14, 16 Inch Bicycle Tires | 30-50 PSI | |
| 20, 22, 24 Inch Bicycle Tires | 40-50 PSI |
Note: Always refer to the recommended pressure printed on your tire sidewall for the most accurate and safe inflation.
8. User Tips
- Pre-set for convenience: Utilize the preset modes for quick inflation of common items like bicycle tires or sports balls.
- Check tire sidewall: Always double-check the recommended PSI/BAR on your tire's sidewall before inflating to avoid over-inflation or under-inflation.
- Charge regularly: Even if not used frequently, charge the pump every few months to maintain battery health.
- Keep adapters handy: Store all valve adapters and needles in a small pouch with the pump so they are readily available when needed.
- Emergency light: Remember to use the built-in LED light for visibility during night-time repairs or in dark environments.
9. Warranty and Support
For warranty claims, technical support, or service inquiries, please contact the original seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
