HSP 94123

Contents

1:10 HSP Unlimited 94123 Electric Flat Run RC Car Racing/Drift Car User Manual

Model: 94123

Brand: HSP

Introduction

This manual provides essential information for the assembly, operation, and maintenance of your 1:10 HSP Unlimited 94123 Electric Flat Run RC Car. Please read this manual thoroughly before assembling and operating your RC car to ensure safe and optimal performance.

Safety Warnings

  • WARNING: Not suitable for children under 36 months.
  • Always operate the RC car in a safe environment, away from people, pets, and obstacles.
  • Ensure all components are securely fastened before operation.
  • Do not modify the RC car or its components, as this may lead to malfunction or injury.
  • Keep hands, face, and loose clothing away from moving parts.
  • This product is not electric and does not include batteries.

Package Contents

The 94123 RC Car kit typically includes the following components:

  • Original Box
  • Operating Instructions (this manual)
  • Charger (for battery, if purchased separately)
  • Remote Controller
  • USB Cable
  • Unassembled Kit (chassis, metal, plastic, PVC parts)

Note: The frame with the metal hub is randomly sent. This is an unassembled kit; assembly is required.

Specifications

Product parameters table

Image: Product parameters table detailing specifications.

General Product Specifications
FeatureDetail
Product ModelHSP Remote Control
Channel Mode3 channels
Antenna TypeBuilt-in single antenna
RF Power<20dbm
Code TypeGFSK Company
Distance≥ 150m (ground)
Battery6V DC 1.5AA*4 (not included)
Charging InterfaceNone
Online UpdateNone
ColorBlack (remote control)
Dimensions (RC Car)360*200*112MM
Height above ground27MM
Front and rear wheelbase265MM
Transmission ratio1:6.52
Transmission system4-wheel drive
Matching motor teeth3.175 inner diameter
Available motor sizeBrushed-540 / Brushless-3650
Battery slot dimensionsLength 135~140MM*Width 43~45MM*Thickness 16~40MM
Installable servo sizeLength 41MM*Thickness 20MM*Width 36MM
Scale1:10
MaterialMetal, Plastic, PVC
State of AssemblyUnassembled Kit

Assembly and Setup

This RC car is provided as an unassembled kit, requiring the user to build it. While detailed step-by-step instructions are not provided in this document, the following images highlight key components and features that will be part of your assembly process.

Close-up of blue RC car chassis

Image: Detailed view of the blue RC car chassis, showing various components.

Key features of the RC car chassis

Image: Highlights of the chassis design, including large metal teeth, upgraded tempered dog bone, sponge front anti-collision, and metal hydraulic shock absorbers.

Key Assembly Considerations:

  • Chassis Components: The kit includes a chassis with large metal teeth for durability, upgraded tempered dog bones for improved performance, and metal hydraulic shock absorbers for better suspension.
  • Front Anti-Collision: A sponge front anti-collision bumper is included to protect the car during impacts.
  • Motor and Servo Installation: Ensure your chosen brushed-540 or brushless-3650 motor and servo (max 41x20x36mm) fit within the designated slots and are securely mounted.
  • Battery Installation: The battery slot accommodates batteries with dimensions of Length 135~140MM, Width 43~45MM, and Thickness 16~40MM.
  • Wheel Hubs: The metal wheel hubs are included and will be randomly selected.

Refer to the included diagrams and your experience with RC model assembly for detailed steps. If you are new to RC car assembly, consider seeking guidance from experienced hobbyists or online communities.

Remote Control Overview

The remote control is a 3-channel transmitter designed for precise control of your RC car.

Remote control diagram with labeled parts

Image: Diagram of the remote control with labels for each function.

Remote Control Functions:

  • Steering Handwheel: Controls the direction of the car (left/right).
  • Throttle Buckle: Controls the speed and forward/reverse movement.
  • Dustproof Flip Cover: Protects internal components.
  • Front and Rear Forward Switching: Toggles between forward and reverse movement.
  • Fast and Slow Fine-tuning: Adjusts the sensitivity of speed control.
  • Direction Forward and Reverse Switching: Reverses the steering direction.
  • Frequency Setting Key: Used for pairing the remote with the receiver.
  • Steering Fine Adjustment: Fine-tunes the steering center point.
  • Steering Strength Fine Adjustment: Adjusts the maximum steering angle.
  • Power Switch: Turns the remote control on/off.
  • Throttle Fine Adjustment: Fine-tunes the throttle neutral point.
  • Three Channel Control Switch: Activates the third channel for additional functions (if applicable).
Remote control system function details

Image: Detailed explanation of remote control system functions.

System Function Details:

  1. Channel Output: The 3-channel transmitter output is assigned as follows:
    • CH1: Steering wheel
    • CH2: Throttle trigger
    • CH3: Three-slot switch (used to adjust the movable direction of each channel relative to its input).
    The ST.REV/TH.REV switch is the reverse button for CH1 and CH2. Ensure the switch is in the correct position.
  2. Channel Reversal: This feature uses the ST.REV/TH.REV switch to adjust the direction of motion. If the switch is in the right position, the table indicates reverse, and the left side means normal.
  3. Accessories (Trim):
    • ST.TRIM (CH1 steering) ornament: Adjustment range -120us to +120us, step length is 4us.
    • ST.TRIM clockwise/TH.TRIM increases the adjustment steps.
    • ST.TRIM counter-clockwise/TH.TRIM anti-clockwise reduces the adjustment steps.
  4. Steering D/R (Dual Rate): ST.D/R for servo stroke adjustment range: 0-120% (default value is 100%). Step length is 5%. Clockwise: increase servo stroke. Counter-clockwise: reduce servo stroke.

Operating Instructions

Once your RC car is fully assembled and the remote control is paired, you can begin operation. Ensure the car's battery is fully charged and correctly installed.

Video: Demonstration of the RC car's drifting and driving capabilities.

Basic Operation:

  1. Power On: Turn on the remote control first, then the RC car.
  2. Steering: Use the steering handwheel to control the car's direction.
  3. Acceleration/Braking/Reverse: Use the throttle buckle to control speed. Push forward for acceleration, pull back for braking, and pull back again for reverse.
  4. Adjustments: Use the fine-tuning knobs on the remote control to adjust steering and throttle sensitivity as needed for optimal control.

Practice in an open area to get accustomed to the controls before attempting advanced maneuvers like drifting.

Maintenance

Regular maintenance will extend the life and performance of your RC car.

  • Cleaning: After each use, clean the car to remove dirt, dust, and debris. Use a soft brush or compressed air for hard-to-reach areas.
  • Inspections: Regularly inspect all screws, nuts, and moving parts for looseness or damage. Tighten any loose fasteners.
  • Lubrication: Apply appropriate RC-grade lubricant to moving metal parts, such as gears and bearings, to reduce wear.
  • Tires: Check tires for wear and tear. Replace them if they are significantly worn or damaged.
  • Battery Care: Follow the manufacturer's instructions for charging and storing your RC car battery. Do not overcharge or completely discharge the battery.
  • Storage: Store the RC car in a dry, cool place away from direct sunlight and extreme temperatures.

Troubleshooting

If you encounter issues with your RC car, try these common troubleshooting steps:

  • Car not responding:
    1. Ensure both the remote control and car are powered on.
    2. Check battery levels in both the car and remote control.
    3. Verify that the remote control and car are properly paired.
  • Poor control or erratic movement:
    1. Check for loose connections or damaged wiring.
    2. Inspect the steering and throttle linkages for obstructions or damage.
    3. Adjust the steering and throttle fine-tuning on the remote control.
  • Reduced speed or power:
    1. Check the car's battery charge level.
    2. Inspect the motor for any obstructions or signs of damage.
    3. Ensure the gears are clean and properly meshed.
  • Unusual noises:
    1. Inspect gears for debris or damage.
    2. Check bearings for wear.
    3. Ensure all parts are securely fastened.

If problems persist, consult an experienced RC hobbyist or contact customer support.

User Tips

  • Battery Management: Always use high-quality batteries and ensure they are fully charged before each use for maximum run time and performance.
  • Practice Makes Perfect: Start by practicing in open, flat areas to get a feel for the controls before attempting more complex maneuvers or racing.
  • Drifting Techniques: For drift enthusiasts, experiment with different tire compounds and suspension settings to achieve your desired drift angle and control.
  • Component Upgrades: As an unassembled kit, this car offers excellent opportunities for customization and upgrades. Research compatible motors, servos, and other parts to enhance performance.

Warranty and Support

This product is listed with no explicit warranty. For any issues or support inquiries, please refer to the seller's return and refund policy or contact the seller directly through the platform where the product was purchased.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.