DACHAN Snowfall LED Light Projector

Introduction

The DACHAN Snowfall LED Light Projector creates a dynamic snow effect, perfect for enhancing the atmosphere of gardens, ballrooms, parties, Halloween, holidays, and weddings. This projector is designed for both outdoor and indoor use, offering a versatile lighting solution. It features weatherproof performance for durability and comes with a remote control for convenient operation.

Please note: This product simulates a snow scene and may differ from real snow.

Package Contents

Before setup, please ensure all items listed below are present in your package:

• 1 x Light Projector
• 1 x Power Supply (Adapter)
• 1 x Ground Stake
• 1 x Instruction Manual
• 1 x Remote Control

Setup

1. Assembly

1. Attach the projection light to either the ground stake or the round base, depending on your desired installation method.
2. Ensure the connection is secure.

2. Placement

The projector can be used both indoors and outdoors. Choose a location that allows for optimal projection onto your desired surface (wall, ceiling, garden, etc.). The projection angle is adjustable by 270 degrees to direct the light precisely.

3. Power Connection

Connect the power supply to the projector and then plug it into a suitable power outlet. Ensure you are using the correct plug type for your region (AC110V US Plug, AC220V EU Plug, AC230V UK Plug, or AC240V AU Plug).

4. Projection Area Guide

The effective projection area varies with distance:

• 10 ft (3m): Approximately 538 ft² (50 m²)
• 16 ft (5m): Approximately 1076 ft² (100 m²)
• 32 ft (10m): Approximately 2152 ft² (200 m²)
• 52 ft (16m): Approximately 4305 ft² (400 m²)

Operating Instructions

Using the Remote Control

The included RF wireless remote control allows you to manage the projector's functions from a distance. Ensure the remote's CR2032 battery is installed correctly.

• Power On/Off: Press the ON/OFF button to turn the projector on or off.
• LED Motor Speed: Use the MOTOR button to adjust the speed of the snow effect, from slow to fast.
• LED Always Bright / Flash: Press the FLASH button to toggle between a steady light effect and a flashing effect.
• Reset: Press the RESET button to return the projector to its initial operating state.
• Timer Settings:
  • 2H: Sets the unit to operate for 2 hours, then turn off for 22 hours, repeating the cycle.
  • 4H: Sets the unit to operate for 4 hours, then turn off for 20 hours, repeating the cycle.
  • 6H: Sets the unit to operate for 6 hours, then turn off for 18 hours, repeating the cycle.

Visual Demonstration

Watch this video to see the dynamic snow effect in action:

Maintenance

The DACHAN Snowfall LED Light Projector is designed to be maintenance-free with no user-serviceable parts. To ensure its longevity and optimal performance, please follow these guidelines:

• Cleaning: Gently wipe the projector's lens and body with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or optical components.
• Storage: When not in use, store the projector in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to keep it in its original packaging to protect it from dust and physical damage.
• Inspection: Periodically check the power cord and adapter for any signs of damage. If any damage is found, discontinue use and contact support.

Troubleshooting

• Projector does not turn on:
  • Ensure the power adapter is securely plugged into both the projector and a working electrical outlet.
  • Verify that the power outlet is active.
• Remote control is unresponsive:
  • Check if the CR2032 battery in the remote control needs replacement.
  • Ensure there are no obstructions between the remote control and the projector.
  • Make sure you are within the effective range of the remote control.
• Projection is dim or unclear:
  • Clean the projector lens with a soft, dry cloth.
  • Ensure the projection surface is clean and free from obstructions.
  • Adjust the distance of the projector from the surface to achieve the desired clarity and coverage.
• Snow effect is not as expected:
  • Remember that this product creates a simulated snow effect, which may differ from natural snow.
  • Adjust the LED motor speed using the remote control to change the dynamic movement of the snow.

Specifications

Warranty and Support

This product comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For any technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for contact information.

User Tips

• Manage Expectations: The projector creates a simulated snow effect. Its appearance will differ from natural snowfall.
• Optimal Placement: Experiment with different distances and angles to find the most visually appealing snow effect for your space. A darker environment will enhance the projection's visibility.
• Remote Line of Sight: While the remote is RF wireless, ensure there are no major physical obstructions that could interfere with the signal.
• Battery Check: If the remote control becomes unresponsive, the first step is always to check and replace its CR2032 battery.
• Secure Installation: When using the ground stake outdoors, ensure it is firmly planted to prevent the projector from falling or shifting due to wind.