Miboxer WiFi+2.4G LED Controller Instruction Manual

1. Introduction

The Miboxer WiFi+2.4G LED Controller series offers advanced control over various LED strip types, including single color, dual white (CCT), RGB, RGBW, and RGB+CCT. These controllers integrate WiFi and 2.4G wireless transmission technology, enabling control via the Tuya Smart app, 2.4G RF remotes, and third-party voice assistants like Amazon Alexa and Google Assistant. With a dual module design (WiFi + Bluetooth), they provide enhanced network experience and improved connection success rates.

This manual provides detailed instructions for the installation, operation, and maintenance of your Miboxer LED controller.

2. Safety Information

• Ensure the input voltage matches the controller's specifications (DC12-24V or DC12-48V).
• Do not exceed the maximum output current or total output wattage of the controller.
• Always disconnect power before making any wiring connections.
• Install the controller in a dry environment, away from moisture and extreme temperatures.
• Professional installation is recommended for complex setups.
• Keep out of reach of children.

3. Product Overview

The Miboxer LED controller series includes various models designed for different LED strip configurations and power requirements. Key features across the series include:

• Control Modes: Tuya Smart App, 2.4G RF Remote, Third-party Voice Control (Alexa, Google Assistant).
• Wireless Technology: WiFi + Bluetooth + 2.4G.
• Advanced Functions: Music rhythm, Biorhythm, Sleep/Wake up plan, Scene customization, Group control, Device sharing, Timing/Countdown, Do not disturb mode, Tap-to-Run & Automation.
• Output Modes: Single Color, Dual White (CCT), RGB, RGBW, RGB+CCT (depending on model).
• Adjustability: 16 Million colors (for RGB/RGBW/RGB+CCT), Saturation control, Color temperature adjustable, Stepless dimming brightness.
• PWM Frequency: Switchable between High (16kHz) and Low (250Hz).
• Signal Transmission: Auto-transmitting and synchronization for 2.4G RF remote control.

Below is an overview of some models:

4. Setup Instructions

4.1. Wiring the Controller

Ensure all power is disconnected before wiring. Connect your LED strip(s) and power supply to the controller according to the specific output mode required. A PUSH switch can also be connected for basic control.

General Wiring Steps:

1. Connect the DC power supply (12-24V or 12-48V, depending on model) to the 'INPUT' terminals (V+ and V-) on the controller.
2. Connect the LED strip(s) to the 'OUTPUT' terminals. Ensure correct polarity and channel connections (e.g., V+, W for single color; V+, CW, WW for dual white; V+, R, G, B for RGB; V+, R, G, B, W for RGBW; V+, R, G, B, CW, WW for RGB+CCT).
3. (Optional) Connect a PUSH switch to the 'GND' and 'PUSH' terminals for manual control.
4. Double-check all connections before restoring power.

4.2. App Installation and Pairing (Tuya Smart App)

The controllers support direct control via the Tuya Smart app, eliminating the need for a separate 2.4G gateway.

1. Download the "Tuya Smart" app from your smartphone's app store (iOS or Android).
2. Register or log in to your Tuya Smart account.
3. Power on the LED controller.
4. Activate WiFi Pairing Mode: Long press the 'SET' button on the controller for 3 seconds until the indicator light flashes quickly.
5. In the Tuya Smart app, tap '+' to add a new device. The app should automatically discover the controller. Follow the on-screen prompts to connect the controller to your home WiFi network.
6. Once connected, you can rename the device and assign it to a room.

4.3. Remote Control Pairing (2.4G RF Remote)

The controllers are compatible with various Miboxer / Mi-Light 2.4G RF remotes (e.g., FUT007, FUT089, FUT092, etc.).

1. Ensure the controller is powered on.
2. Activate Linking Mode: Briefly press the 'SET' button on the controller once. The indicator light will flash slowly.
3. Within 3 seconds of activating linking mode, press the 'ON' button (or the linking button) on your 2.4G RF remote.
4. The controller's indicator light will flash rapidly to confirm successful pairing.

5. Operating Instructions

5.1. Tuya Smart App Control

Once paired, the Tuya Smart app provides comprehensive control over your LED lighting:

• Color/Brightness/Saturation: Adjust these parameters using the intuitive interface.
• Output Mode Switching: For multi-mode controllers (e.g., 2-in-1, 3-in-1, 5-in-1), the app allows you to select the desired output mode (Single Color, Dual White, RGB, RGBW, RGB+CCT).
• Scenes: Create and customize lighting scenes for different moods or activities (e.g., "Good night," "Reading," "Leisure").
• Music Rhythm: Enable the music rhythm function to synchronize light changes with music.
• Timing/Countdown: Set schedules for lights to turn on/off automatically.
• Biorhythm: Adjust light states according to the change of sun during the day.
• Sleep/Wake Up Plan: Configure fade in/out lighting for sleep and wake-up routines.
• Do Not Disturb Mode: Prevents accidental power-on (lights will light up after being powered on 2 times).
• Group Control: Group multiple controllers or lamps of the same type for synchronized control.
• Device Sharing: Share control of devices with family members.
• Tap-to-Run & Automation: Create custom automation rules based on conditions (e.g., time, weather, other smart devices).

5.2. 2.4G RF Remote Control

Use your paired 2.4G RF remote for quick adjustments:

• On/Off: Power the lights on or off.
• Dimming: Adjust brightness levels.
• Color/Color Temperature: Change colors or adjust white light temperature (CCT) if supported by your remote and LED strip.
• Mode Selection: Some remotes may have buttons to cycle through modes or scenes.

The controllers support signal transmitting and mode synchronization. One lighting fixture can transmit signals from the remote to another within 30m, extending the control range. Different fixtures can work synchronously when started at different times, controlled by the same remote, under the same dynamic mode, and within 30m distance.

5.3. Voice Control

Integrate your controller with Amazon Alexa or Google Assistant for hands-free control. Ensure your Tuya Smart account is linked to your voice assistant app.

• Commands: Use commands like "Alexa, turn on the living room lights," "Hey Google, set the bedroom lights to blue," or "Alexa, dim the kitchen lights to 50%."

5.4. Switching Output Modes (via SET button)

For controllers that support multiple output modes (e.g., 2-in-1, 3-in-1, 5-in-1), you can cycle through them by continuously pressing the 'SET' button:

• 2-in-1 Controllers (SW2, PW2, HW2, FUT035W+): Press 'SET' repeatedly to switch between Single Color and Dual White modes.
• 3-in-1 Controllers (FUT037W+): Press 'SET' repeatedly to switch between RGB, RGBW, and RGB+CCT modes.
• 5-in-1 Controllers (SW5, PW5, HW5, WL5): Press 'SET' repeatedly to switch between Single Color, Dual White, RGB, RGBW, and RGB+CCT modes.

5.5. PWM Frequency Switching

Some controllers allow switching between high (16kHz) and low (250Hz) PWM frequencies. This can be useful for specific LED types or to reduce flicker in video recordings.

6. Maintenance

• Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the controller to direct sunlight, high humidity, or extreme temperatures.
• Ensure proper ventilation around the controller to prevent overheating, especially for higher wattage models.
• Regularly check wiring connections for any signs of wear or looseness.
• Keep the Tuya Smart app updated to the latest version for optimal performance and new features.

7. Troubleshooting

• Lights not responding:
  • Check power supply connections to the controller and LED strip.
  • Ensure the controller is powered on and its indicator light is active.
  • Verify app or remote control pairing. Re-pair if necessary.
  • Check if the controller is within the 2.4G RF control distance (30m).
• App connection issues:
  • Ensure your smartphone is connected to a 2.4GHz WiFi network during pairing.
  • Restart your router, controller, and smartphone.
  • Try resetting the controller to factory settings (refer to specific model instructions if available, usually involves power cycling or holding SET button during power-on) and re-pairing.
  • Ensure the Tuya Smart app has necessary permissions on your phone.
• Incorrect colors or modes:
  • Verify that the LED strip type matches the controller's output mode setting. Cycle through modes using the 'SET' button or app.
  • Check wiring connections for RGB/RGBW/RGB+CCT strips to ensure correct color channel assignment.
• Flickering lights:
  • Ensure the power supply is stable and sufficient for the connected LED strip length.
  • Try switching the PWM frequency (if supported) between high and low settings.

8. Specifications

Below are the detailed specifications for various Miboxer LED Controller models:

9. User Tips

• For optimal WiFi performance, ensure your controller is within range of your 2.4GHz router.
• When setting up, try to complete the WiFi pairing process in a location with good signal strength.
• Utilize the group control feature in the Tuya Smart app to manage multiple light zones efficiently.
• Experiment with the PWM frequency setting if you notice any visual flicker, especially when recording video of your lights.
• Regularly check for firmware updates through the Tuya Smart app to ensure you have the latest features and bug fixes.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's specific terms or contact their customer service directly. Keep your purchase receipt as proof of purchase.