Introduction
This manual provides instructions for the setup, operation, and maintenance of your new Bluetooth Voice Remote Control, compatible with various Sharp Aquos LED TV models including 4T-C60BJ3T, 4T-C60BK1X, and 4T-C70Bj3T. This remote supports both Infrared (IR) and Bluetooth wireless communication for comprehensive control of your television.
Setup Instructions
1. Battery Installation
The remote control requires AAA batteries (not included) for operation. Follow these steps to install them:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover, sliding it back into place until it clicks securely.
2. Pairing with Your TV (Matching Tutorial)
To enable full functionality, including Bluetooth voice control, the remote must be paired with your Sharp Aquos LED TV. Ensure the TV is powered on before starting the pairing process.
- Ensure the remote control does not have a battery installed initially. Then, install the batteries as described above.
- If the TV power plug is unplugged, manually restart the TV by plugging it back in and turning it on.
- Position the newly purchased remote control at a distance from the TV (within a few feet).
- Simultaneously press and hold the "Left Arrow" button (
) and the "Home" button () for approximately 5 seconds to initiate pairing with your TV model. - The TV should display a pairing confirmation message once successful.
Operating Instructions
Your remote control is designed for intuitive navigation and control of your Sharp Aquos LED TV. Below are the primary functions:
- Power Button: Turns the TV on or off.
- Number Pad (0-9): Direct channel selection.
- INFO / CC: Displays program information or activates closed captions.
- AUDIO / MPX: Adjusts audio settings or multiplex options.
- EPG: Accesses the Electronic Program Guide.
- GUIDE / TOOLS: Opens the TV guide or access additional tools/settings.
- YouTube / Netflix: Dedicated buttons for quick access to these streaming services.
- Voice Control Button: Activates the Bluetooth voice command feature. Press and hold to speak your commands.
- Navigation Pad (Up, Down, Left, Right) & ENTER: Navigates menus and confirms selections.
- BACK / HOME: Returns to the previous screen or goes to the TV's home menu.
- INPUT: Selects input sources (HDMI, AV, etc.).
- VOL +/-: Adjusts volume up or down.
- CH +/-: Changes channels up or down.
- Mute Button: Mutes or unmutes the TV audio.
- Color Buttons (R, G, Y, B): Functionality varies depending on the TV menu or application.
- DTV MENU: Accesses digital TV specific menus.
Voice Control Functionality
The remote control supports Bluetooth voice commands. After successful pairing, press the dedicated voice control button (often depicted as a microphone icon) and speak clearly into the remote to issue commands to your TV, such as changing channels, searching for content, or adjusting settings.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or sprays, as they may damage the remote.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA).
- Storage: If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
Troubleshooting
- Remote not responding:
- Check if the batteries are correctly installed and not depleted. Replace if necessary.
- Ensure there are no obstructions between the remote and the TV's IR receiver.
- Re-attempt the pairing process if using Bluetooth functionality.
- Voice control not working:
- Ensure the remote is successfully paired via Bluetooth.
- Speak clearly and hold the remote closer to your mouth when using voice commands.
- Check TV settings to ensure voice control is enabled.
- Specific buttons not working:
- Some buttons (e.g., app-specific buttons) may require an active internet connection or specific TV software versions.
- If only certain buttons fail, the remote might be damaged.
Specifications
| Feature | Detail |
|---|---|
| Model Numbers | GB336WJSA, GB346WJSA, GB326WJNA |
| Wireless Communication | IR, Bluetooth |
| Use | TV (Sharp Aquos LED TVs) |
| Power Source | AAA Batteries (not included) |
| Package Dimensions (approx.) | Length: 23 cm, Width: 5 cm, Height: 5 cm |
| Package Weight (approx.) | 0.1 kg |
| Support APP | No |
User Tips
Based on common user experiences, here are some tips for optimal use:
- For best performance of voice control, ensure the remote is fully paired via Bluetooth and speak clearly.
- If the remote seems unresponsive, try replacing the batteries before attempting to re-pair.
- Keep the remote clean and free from dust to ensure all buttons function smoothly.
Warranty and Support
For any issues not covered in this manual, or for warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.