Introduction
This manual provides instructions for the 1STPlayer NEO87 Customized Tri-Mode Mechanical Keyboard. This 87-key keyboard features a Gasket structure, hot-swappable switches, PBT keycaps, and offers Wired, Bluetooth, and 2.4G wireless connectivity. It is designed for both gaming and office use, compatible with Desktop, Laptop, and Tablet devices.
Key Features
- Tri-Mode Connectivity: Wired (Type-C), Bluetooth 5.0, and 2.4G Wireless for versatile use.
- Gasket Structure: Five-layer fill design for a pleasant sound and soft, comfortable typing experience.
- Hot-Swappable Switches: Full key hot-plug design allows for easy replacement of mechanical switches without soldering.
- 87-Key Layout: Standard Tenkeyless (TKL) layout, providing a compact yet functional design.
- PBT Keycaps: Made from durable PBT plastic, offering wear-resistance and an ergonomic profile.
- RGB Backlight: Multicolor independent light bar with customizable lighting effects.
- Large Battery Capacity: Equipped with an 8000mAh lithium battery for extended wireless usage.
- Aluminum Alloy Construction: Features an arc upper cover and aluminum alloy components for durability and aesthetic appeal.
Setup Guide
Package Contents
Ensure all components are present in your package:
- 1 x 1STPlayer NEO87 Mechanical Keyboard
- 1 x Type-C USB Cable
- 1 x 2.4G Wireless Receiver
- 1 x Keycap/Switch Puller (if included)
Connection Modes
The NEO87 keyboard supports three connection modes: Wired, Bluetooth, and 2.4G Wireless. Use the switch located on the keyboard to select your desired mode.
1. Wired Connection
- Connect the provided Type-C USB cable to the keyboard's Type-C port.
- Connect the other end of the USB cable to an available USB port on your computer.
- The keyboard will automatically switch to wired mode.
2. 2.4G Wireless Connection
- Locate the 2.4G wireless receiver (often stored in a compartment on the keyboard).
- Plug the 2.4G receiver into an available USB port on your computer.
- On the keyboard, slide the connection mode switch to "2.4G". The keyboard should connect automatically.
3. Bluetooth Connection
- On the keyboard, slide the connection mode switch to "BT".
- The keyboard will enter pairing mode (an indicator light may flash).
- On your device (computer, laptop, tablet), open Bluetooth settings and search for new devices.
- Select "NEO87" (or a similar name) from the list of available devices to pair.
- Follow any on-screen prompts to complete the pairing process.
Operating Instructions
Basic Functions
- Typing: Use the keys as a standard 87-key keyboard.
- Function Keys: The F1-F12 keys may have secondary functions accessible via the Fn key. Refer to the keycap legends for specific combinations (e.g., multimedia controls, volume).
Backlight Control
The keyboard features a multicolor RGB backlight and an independent light bar. Specific key combinations (e.g., Fn + arrow keys, Fn + specific function keys) are typically used to change lighting modes, brightness, and speed. Refer to the keyboard's keycap legends or a dedicated software (if available) for detailed controls.
Hot-Swappable Switches
The NEO87 supports full key hot-swapping, allowing you to change mechanical switches without soldering.
To Replace a Switch:
- Use the provided keycap puller to carefully remove the keycap from the desired switch.
- Use the switch puller to gently extract the switch from the PCB.
- Align the pins of the new switch with the holes on the PCB and press firmly until it clicks into place. Ensure the pins are not bent.
- Reattach the keycap.
Ensure the new switches are compatible with the keyboard's PCB (e.g., 3-pin or 5-pin).
Battery Management
The keyboard is equipped with an 8000mAh lithium battery.
- Charging: Connect the keyboard via the Type-C USB cable to a power source (computer USB port or USB charger). An indicator light will show the charging status.
- Battery Life: Approximately 30-40 days in no-light mode, and up to 28 hours at maximum brightness with lighting enabled.
Maintenance
To ensure the longevity and optimal performance of your keyboard, follow these maintenance guidelines:
- Cleaning Keycaps: Use a keycap puller to remove keycaps. Clean them with a mild soap solution and a soft brush, then rinse and dry thoroughly before reattaching.
- Cleaning the Board: Use compressed air to remove dust and debris from between switches. A soft, dry cloth can be used to wipe the keyboard surface.
- Avoid Liquids: Do not expose the keyboard to liquids. In case of spills, immediately disconnect the keyboard and allow it to dry completely before reconnecting.
- Storage: Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Keyboard Not Responding
- Wired Mode: Ensure the USB cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4G Wireless Mode: Ensure the 2.4G receiver is plugged in and the keyboard switch is set to "2.4G". Try re-pairing by unplugging and replugging the receiver, then toggling the keyboard switch.
- Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard switch is set to "BT". Try re-pairing the keyboard through your device's Bluetooth settings. Ensure the keyboard is charged.
- Battery: Check if the keyboard battery is charged. Connect it via USB cable to charge.
Keys Not Registering / Double Typing
- This could indicate a faulty switch. Utilize the hot-swap feature to replace the problematic switch. Ensure the new switch is properly seated.
- Clean under the keycap and around the switch to remove any debris.
Backlight Not Working / Incorrectly Displaying
- Ensure the backlight is enabled and brightness is turned up using the appropriate Fn key combinations.
- If using software, check software settings.
- Try resetting the keyboard (e.g., by turning it off and on, or disconnecting and reconnecting).
Connectivity Issues (Lag/Disconnections)
- Wireless Modes: Ensure there are no strong interfering signals (e.g., other 2.4G devices, Wi-Fi routers) nearby. Move the keyboard closer to the receiver/device. Try switching to wired mode to confirm the issue is wireless-specific.
- Bluetooth: Ensure your device's Bluetooth drivers are up to date.
Specifications
| Feature | Detail |
|---|---|
| Model | NEO87 |
| Brand | 1STPlayer (BITCED) |
| Keyboard Standard | 87 Keys |
| Connection Type | Wired (USB Type-C), Bluetooth 5.0, 2.4G Wireless |
| Operation Style | Mechanical |
| Switches Hot Swap | Yes |
| Keycup Material | PBT plastic |
| Keycup Printing | Dye-sublimation |
| Backlight Type | Multicolor RGB |
| Battery Capacity | 8000mAh |
| Application | Desktop, Laptop, Tablet |
| Wrist Support | Yes |
| Origin | Mainland China |
| Certification | CE |
| Dimensions | 375.36*145.59*42.82+1MM |
| Structure | GASKET structure full key hot plug full key no punch |
| Positioning plate | PC positioning plate |
| Satellite axis | Full POM |
| PCB board | Single Key Slot |
| Sound Pack | PORON sandwich cotton, IXPE shaft lower pad, PET sound superior pad PORON shaft seat cushion, open mold EVA bottom filling |
Switch Specifications (Example: Sea Salt Latte Axis)
- Trigger Pressure: 45 + 8GF
- Trigger Stroke: 2.0 ± 0.40MM
- Total Stroke: 3.6 ± 0.20MM
User Tips
- Customization: Take advantage of the hot-swappable switches to experiment with different switch types for a personalized typing experience.
- Battery Life: To maximize battery life, especially in wireless modes, consider reducing backlight brightness or turning off the backlight when not needed.
- Gasket Feel: The five-layer Gasket structure is designed for a unique typing feel and sound. Allow some time to get accustomed to it if you're new to Gasket-mounted keyboards.
Warranty and Support
For warranty information and technical support, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
