AVATTO WT498

Contents

AVATTO Tuya WiFi Smart Thermostat WT498 User Manual

Model: WT498 | Brand: AVATTO

1. Introduction

The AVATTO Tuya WiFi Smart Thermostat WT498 is an intelligent digital temperature controller designed for water and gas boiler heating systems. It consists of a wireless RF433 thermostat panel and a receiver unit. By comparing ambient and set temperatures, it controls the heating system to maintain a comfortable and energy-efficient environment. This thermostat supports remote control via the Smart Life/Tuya app and voice commands through popular smart home assistants.

AVATTO Tuya WiFi Smart Thermostat and RF Receiver
Figure 1: AVATTO Tuya WiFi Smart Thermostat (left) and RF Receiver (right).

2. Key Features

  • Wireless Connectivity: RF433 wireless connection between thermostat and receiver, eliminating the need for direct wiring to the boiler.
  • Smart Home Integration: Compatible with Smart Life/Tuya app for remote control and supports voice control via Amazon Alexa, Google Home, and Yandex Alice.
  • Multiple Operating Modes: Choose between Manual, Program, and Temporary modes for flexible temperature management.
  • Programmable Schedule: Customize heating schedules with 5+2, 6+1, or 7-day programming options, including 6 time periods daily.
  • Precise Temperature Control: Features temperature hysteresis from 0.5 to 10°C, a minimum temperature setting of 0.5°C, and adjustable upper/lower temperature limits from 5 to 95°C.
  • Temperature Calibration: Allows for display temperature correction from -9.9°C to 9.9°C.
  • Child Lock Function: Prevents unintended adjustments by children.
  • Group Control: Manage multiple thermostats in different rooms simultaneously through the app.
  • Family Share: Share device control with family members.
  • Low Temperature Protection: Automatic antifreeze function activates heating when indoor temperature drops below 5°C.

3. Package Contents

Upon opening your package, you should find the following items:

  • AVATTO RF Thermostat Panel
  • AVATTO RF Receiver Unit
  • Mounting Screws and Expansion Sleeves
  • User Manual (this document, also available as a PDF)

4. Setup and Installation

4.1. Receiver Wiring and Placement

Important: Since some circuits of this product involve strong electricity, installation should be performed by a qualified professional.

The receiver unit must be wired to your water or gas boiler system. Ensure proper power supply and connections as per the diagrams below. The thermostat panel communicates wirelessly with this receiver.

Wiring Diagram for Boiler
Figure 2: Wiring Diagram for Boiler Connection. Connect Neutral (N), Live (L), and Boiler terminals as shown.
Wiring Diagram for Actuator
Figure 3: Wiring Diagram for Electric Actuator Connection (Normally Open and Normally Close options). Connect Neutral (N), Live (L), and Actuator terminals as shown.

Note:
Normally Open: Motorized valve remains open.
Normally Close: Motorized valve remains closed.

4.2. Thermostat Panel Installation

Install the intelligent touch screen thermostat in a location that is easy to view and adjust. The thermostat should be placed where it can accurately represent the overall ambient temperature of the room. Avoid installing it near heat sources (e.g., vents, heaters), cold sources (e.g., windows, drafts), or in direct sunlight.

  1. Prepare the Wall: Install expansion screw sleeves with a spacing of 59mm on the wall.
  2. Prepare the Thermostat: Use a screwdriver to carefully separate the upper cover from the lower cover of the thermostat.
  3. Route Wiring: Pass the necessary wires through the back cover to the wiring duct, leaving approximately 20cm of wire length for connection.
  4. Mount the Base: Fix the bottom shell of the thermostat to the wall using the provided screws.
  5. Connect and Assemble: Secure the wires to the appropriate terminals (if any direct wiring is needed for the thermostat itself, though it's primarily wireless to the receiver), then cover the front shell onto the bottom shell.
Thermostat Installation Steps
Figure 4: Thermostat panel installation showing screw points and wire routing.

4.3. Code Matching Process (Thermostat to Receiver)

This process establishes the wireless connection between your thermostat panel and the receiver unit.

  1. Power on Receiver: Power on the receiver panel. The power indicator light will be continuously on.
  2. Activate Pairing Mode on Receiver: Press and hold the code matching button on the receiver. The code matching indicator will begin to flash.
  3. Power on Thermostat: Install three 1.5V AA batteries into the transmitting panel (thermostat).
  4. Initiate Code Check on Thermostat: After the thermostat powers on, press and hold the Restart key (usually the power button) for 5 seconds to initiate the code checking process.
  5. Confirm Pairing: When the code checking indicator light on the receiver panel remains steadily on, the code checking (pairing) is successful.
Wireless Connection Diagram
Figure 5: Diagram illustrating the wireless RF433 connection between the thermostat and receiver.

5. Basic Operation

Thermostat Display and Controls
Figure 6: Detailed view of the thermostat display and control keys.
  • ON/OFF Key: Press the power button once to turn the thermostat on or off. Pressing it again while off will close all valves.
  • Mode Switch Key: In the power-on state, press the Option key (usually represented by a square icon) to switch between working modes. The LCD will indicate manual mode, and the display will indicate automatic mode.
  • Temperature Regulation Key: In the startup state, press the Confirmation key (usually a circular icon) and the temperature display will flash. Then, rotate the outer frame of the thermostat to adjust the temperature setting.
  • Clock Adjustment: In the power-on state, press and hold the Confirmation key for 5 seconds. After the clock icon flashes, rotate the outer frame to adjust the time. Press the Confirmation key to switch between time and week adjustments. Press the Confirmation key again to save and exit.
  • Lock Key Function (Child Lock): In the power-on state, press and hold the Option key for 5 seconds to activate the child lock. A lock icon will appear at the bottom of the display screen, indicating successful locking.

5.1. Programming Mode

The thermostat allows for advanced scheduling to optimize comfort and energy savings.

  1. Enter Programming Mode: In the startup state, press and hold the Option key for 5 seconds to enter programming mode.
  2. Navigate Parameters: Once in programming mode, press the Confirmation key to cycle through different parameters (time periods).
  3. Adjust Settings: Rotate the outer frame to adjust various parameters (e.g., time). Press the Confirmation key to adjust minutes, and rotate the outer frame to adjust the temperature for each period.
  4. Save and Exit: Press the Option key to save your settings and exit programming mode.

Example Programming Schedule:

IconTimeDefault Temperature
Weekday Schedule
106:0020℃
208:0016℃
311:3016℃
412:3016℃
517:0022℃
622:0016℃
Day Off Schedule
108:0022℃
223:0016℃
App Weekday Setting
Figure 7: App interface for setting weekday programming.

5.2. Parameter Settings (Advanced Options)

To access advanced settings:

  1. Enter Settings: In the shutdown state, long press the Confirmation key for 5 seconds to enter the parameter setting interface.
  2. Cycle Parameters: Press the Confirmation key to cycle through the parameters.
  3. Adjust Values: Rotate the outer frame to adjust the value for each parameter.
  4. Save and Exit: Press the Option key to save and exit.

Available Parameters:

ItemParameter NameDefault ValueFunctional Meaning
1Temperature compensation0Compensation range: -9.9 to 9.9°C
2Switch deviation setting1Temperature difference start-up range: 0.5-10°C
3Shutdown antifreeze functionONOFF: Turn off antifreeze; ON: Turn on antifreeze
4Rest day selection20: No programming; 1: One day off; 2: Two-day weekend; 3: No rest
5Set the upper limit of the temperature60°CSet upper temperature range from 15-95°C
6Restore factory settingsLong press for 3 secondsDisplay confirms restoration
App Temperature Correction
Figure 8: App interface for temperature correction.

5.3. Low Temperature Protection Function

If the shutdown antifreeze function is set to ON (via advanced options, item 3), the thermostat will automatically turn on heating when the indoor temperature drops below 5°C. Heating will automatically turn off once the indoor temperature rises back to 5°C.

6. Smart Life/Tuya App Control

The AVATTO WT498 thermostat can be controlled remotely using the Smart Life or Tuya Smart app on your smartphone.

  1. Download App: Download and install the Smart Life or Tuya Smart app from your device's app store.
  2. Register/Log In: Create an account or log in to your existing account.
  3. Add Device: In the app, select to add a new device.
  4. Activate WiFi Connection Mode on Thermostat: When the thermostat panel is turned off, press and hold the Up button for 5 seconds. The WiFi icon on the thermostat display screen will flash slowly, indicating it has entered code checking (pairing) state.
  5. Select Device in App: In the app's device list (under 'small household appliances'), find and select the 'temperature controller product (Bluetooth+WIFI version)' in the specified distribution mode.
  6. Connect to WiFi: Click the confirmation button on the app page. Select your home WiFi network that has internet access and enter the WiFi password.
  7. Follow Prompts: Click 'Next' and follow any on-screen prompts to connect. Once connected, return to the app to complete the distribution process.
App Remote Control
Figure 9: Remote control via Smart Life/Tuya app.

6.1. Voice Control

Once connected to the Smart Life/Tuya app, you can link your thermostat to Amazon Alexa, Google Home, or Yandex Alice for voice control.

Voice Control with Smart Assistants
Figure 10: Example of voice control with Alexa, Google Home, and Yandex Alice.

6.2. Group Control and Family Sharing

  • Group Control: The app allows you to create groups of thermostats to control multiple devices in different rooms simultaneously, ideal for multi-zone heating systems.
  • Family Sharing: You can share control of your thermostat with other family members through the app, allowing everyone to manage the home's temperature.
Group Control Function
Figure 11: Diagram illustrating group control of multiple thermostats.
Family Share Function
Figure 12: App interface for sharing device control with family members.

7. Maintenance

  • Cleaning: Wipe the thermostat screen and body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace the three 1.5V AA batteries in the thermostat panel when the low battery indicator appears on the display.
  • Firmware Updates: Periodically check the Smart Life/Tuya app for any available firmware updates for your thermostat to ensure optimal performance and new features.

8. Troubleshooting

PhenomenonSolutions
Thermostat does not start up1. Check if batteries are installed correctly (polarity).
2. Verify if the boot key is functioning properly.
LCD displays messy codeThe rear shell installation might be deformed. Loosen and reinstall the rear shell.
Display is normal, but no output (heating not activating)1. Check if the connection between the main control board and the power board is damaged.
2. Verify that the output wiring to the boiler/actuator is correct.
Temperature display errorCalibrate the panel temperature display via the first item in the advanced options (Temperature compensation).
Cannot connect to WiFi1. Ensure the thermostat is in WiFi connection mode (WiFi icon flashing slowly).
2. Check your WiFi network name and password.
3. Ensure your router is 2.4GHz compatible (most smart devices do not support 5GHz WiFi).
4. Move the thermostat closer to the WiFi router during setup.

9. Specifications

FeatureDetail
Model NumberWT498
Brand NameAVATTO
CertificationCE
Temperature SensorNTC
Temperature Precision±1°C
Self-Consumed Power< 170 μW
Voltage (Thermostat)Three 1.5V AA batteries
Load Current (Receiver)3A (negative)
Protection GradeIP20
APP ControlSmart Life / Tuya
Voice ControlAlexa, Google Home, Yandex Alice

9.1. Product Dimensions

RF Thermostat Dimensions
Figure 13: Dimensions of the RF Thermostat Panel (approx. 10.5cm H x 8.6cm W x 8cm base D).
RF Receiver Dimensions
Figure 14: Dimensions of the RF Receiver Unit (approx. 8.6cm H x 8.6cm W x 2.8cm D).

10. User Tips

  • Remote Temperature Adjustment: Yes, the temperature can be adjusted directly from the Smart Life/Tuya phone app from anywhere, anytime, as long as your thermostat is connected to Wi-Fi.
  • Multi-Thermostat Control: The 'Group-Control Function' allows you to manage multiple thermostats (e.g., 3-4 units) with a single receiver or across different receivers within the same app, enabling multi-zone heating control.
  • PDF Manual: For a detailed visual guide, refer to the official user manual PDF available here.

11. Warranty and Support

This product comes with a 1-year warranty from the date of purchase. For technical support or warranty claims, please contact your retailer or the AVATTO customer service. Keep your purchase receipt as proof of warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.