1. Introduction
The ARROWMAX GC6 Smart Engraving Pen is a versatile, cordless rotary tool designed for precision tasks such as engraving, polishing, carving, and grinding on various materials including wood, shell, jade, stone, glass, and jewelry. Featuring a lightweight carbon fiber body, a high-efficiency hollow cup motor, and smart motion control (SMC) system, the GC6 offers both power and precision. It includes an OLED display for real-time feedback and can be controlled via a smartphone app for customized settings. The GC6 is available in two versions: GC6 and GC6 Plus, with the Plus version offering additional accessories like a magnetic charger holder and storage bag.
Video: Overview of the ARROWMAX GC6 Smart Engraving Pen features and usage.
2. Package Contents
Please check the contents of your package upon receipt. If any items are missing or damaged, contact customer support.
GC6 Standard Package:
- GC6 Carbon Fibre Cordless Rotary Pen
- Aluminum alloy storage box
- Polishing bits (x 9)
- Engraving bits (x 30)
- Type-C USB magnetic cable
Image: Contents of the GC6 Standard Package, including the pen, storage box, various bits, and charging cable.
GC6 Plus Package:
- GC6 Carbon Fibre Cordless Rotary Pen
- Aluminum alloy storage box
- Polishing bits (x 9)
- Engraving bits (x 30)
- Type-C USB magnetic cable
- Carbon Fibre magnetic charging stand
- Storage bag
Image: Contents of the GC6 Plus Package, showing the pen, storage box, bits, charging cable, magnetic charging stand, and storage bag.
3. Setup
3.1 Initial Charging
Before first use, fully charge the GC6. Connect the Type-C USB magnetic cable to the charging port of the pen and a suitable USB power source. The OLED display will show a battery indicator bar during charging.
Image: The GC6 pen being charged via its magnetic USB-C cable.
For GC6 Plus users, you can also use the carbon fiber magnetic charging stand for convenient charging. The pen can be charged both inside and outside its alloy storage box.
Image: The GC6 pen charging while stored within its alloy box.
3.2 Installing/Changing Bits
- Ensure the GC6 is turned off.
- Unscrew the chuck at the tip of the pen counter-clockwise to loosen it.
- Insert the desired engraving or polishing bit into the chuck. The bits have a standard diameter of 2.35mm.
- Tighten the chuck clockwise until the bit is securely held. Do not overtighten.
Image: A user demonstrating the insertion of a bit into the GC6 pen.
4. Operation
4.1 Power On/Off
Press and hold the power button (circular button on the side) for a few seconds to turn the pen on or off. The OLED display will illuminate upon power-on.
4.2 Speed Adjustment
The GC6 offers adjustable speeds from 10,000 RPM to 30,000 RPM.
- Manual Adjustment: With a flick of your wrist, you can adjust the speed. The OLED display will show the current RPM.
- Pre-set Modes: The pen has 4 pre-set modes:
- A: 10000-30000 RPM (Auto Sensing)
- 1: 15000 RPM (Low)
- 2: 20000 RPM (Medium)
- 3: 25000 RPM (High)
- 4: 30000 RPM (Maximum)
Image: The GC6's OLED display indicating current speed mode, battery level, and rotation direction.
4.3 Direction Control
The GC6 supports both forward (clockwise) and reverse (anti-clockwise) rotation. This can be adjusted via the wrist flick motion or through the smartphone app.
Image: Diagram illustrating how wrist flick motion controls speed and rotation direction.
4.4 App Control (ARROWMAX App)
The ARROWMAX app (available on Google Play and App Store) allows for precise customization of the GC6. You can adjust speed by every 1000 RPM and set forward/reverse direction for each of the 4 customized modes.
- Download the ARROWMAX app from your device's app store.
- Ensure Bluetooth is enabled on your smartphone.
- Open the app and follow the on-screen instructions to connect to your GC6.
- Once connected, you can use the app interface to control speed and direction.
Image: Screenshot of the ARROWMAX smartphone app, showing speed and direction controls for the GC6.
The GC6 features a smart memory function, recalling your last used settings upon power-on, making it ready for immediate use with your preferred configurations.
4.5 Application Examples
The GC6 is suitable for a wide range of applications:
- Engraving: Wood, stone, jade, shell, glass, metal.
- Polishing: Jewelry, small components.
- Carving: Detailed work on various materials.
- Grinding: Shaping and refining surfaces.
Image: Various applications of the GC6, including engraving on wood, shell, jade, and stone.
5. Maintenance
5.1 Cleaning
- Ensure the device is powered off and disconnected from any charging cable before cleaning.
- Wipe the carbon fiber body with a soft, dry cloth.
- For the chuck area, use a small brush to remove any dust or debris from grinding.
- Do not use harsh chemicals or abrasive cleaners.
5.2 Bit Care
- After each use, clean any residue from the bits.
- Store bits in their designated slots within the aluminum alloy storage box to prevent damage and loss.
- Replace worn or dull bits to maintain optimal performance and prevent damage to your work material.
6. Troubleshooting
6.1 Device Not Turning On
- Battery: Ensure the battery is sufficiently charged. Connect the pen to the charger and allow it to charge for at least 30 minutes before attempting to power on again.
- Power Button: Make sure you are pressing and holding the power button for a few seconds, not just a quick press.
6.2 Inconsistent Speed or Performance
- Bit Installation: Check if the bit is securely installed in the chuck. A loose bit can cause vibrations and inconsistent performance.
- Bit Condition: Ensure the bit is not worn, dull, or damaged. Replace if necessary.
- Material: Verify that the chosen speed and bit are appropriate for the material you are working on.
- App Connection: If using app control, ensure a stable Bluetooth connection.
6.3 App Connectivity Issues
- Bluetooth: Confirm Bluetooth is enabled on your smartphone and the GC6 is powered on.
- App Version: Ensure your ARROWMAX app is updated to the latest version.
- Re-pair: Try unpairing and re-pairing the device within the app's settings.
7. Specifications
| Feature | Detail |
|---|---|
| Model | GC6 |
| Brand | ARROWMAX |
| Speed Range | 10,000 - 30,000 RPM (Max 30000 RPM) |
| Motor Type | Hollow Cup Motor |
| Control System | Smart Motion Control (SMC) |
| Display | OLED (Direction, Dynamic Display, Mode, Battery Indicator) |
| Connectivity | Bluetooth (for ARROWMAX App) |
| Power Source | Rechargeable Battery (Included) |
| Charging | Type-C USB Magnetic Charging |
| Body Material | Carbon Fiber |
| Bit Shank Diameter | 2.35mm |
| Application | Home DIY, Crafts, Jewelry, Wood, Glass, Carving |
| Certifications | CE, FCC, RoHS |
| Origin | Mainland China |
| Package Weight | 0.5 kg |
| Package Dimensions | 20cm (L) x 5cm (W) x 5cm (H) |
Image: A selection of engraving and polishing bits, showing their various shapes and the 2.35mm shank diameter.
8. User Tips
- Bit Selection: Always choose the appropriate bit for the material and task. Finer bits are for detail work, while coarser bits are for material removal.
- Gentle Pressure: Allow the tool's speed to do the work. Excessive pressure can lead to reduced performance, bit wear, and potential damage to the tool or workpiece.
- Practice: If you are new to rotary tools, practice on scrap material before working on your final project to get a feel for the tool's speed and control.
- Cleanliness: Regularly clean the chuck and bits to ensure smooth operation and prolong the life of your accessories.
- App Customization: Utilize the ARROWMAX app to save custom speed and direction settings for frequently performed tasks on specific materials. This can significantly improve consistency and efficiency.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official ARROWMAX website or contact your retailer. Keep your proof of purchase for any warranty claims.
