K&F CONCEPT VA3+BV60

Contents

K&F CONCEPT VA3+BV60 Fluid Head Tripod Instruction Manual

Model: VA3+BV60

1. Product Overview

The K&F CONCEPT VA3+BV60 Fluid Head Tripod is a professional-grade video camera tripod designed for stability and smooth camera movements. It features an adjustable damping fluid head, a high load capacity, and versatile compatibility for various shooting scenarios.

K&F CONCEPT VA3+BV60 Fluid Head Tripod

Figure 1: K&F CONCEPT VA3+BV60 Fluid Head Tripod

2. Package Contents

Please check the package to ensure all items are present:

  • 1 x VA3+BV60 Video Tripod with Fluid Head
  • 4 x Wrenches
  • 1 x Storage Bag
  • 1 x Instruction Manual (this document)
Product List showing tripod, wrenches, storage bag, and manual

Figure 2: Included accessories

3. Setup Guide

3.1 Unfolding the Tripod

  1. Place the tripod on a flat, stable surface.
  2. Release the leg locking mechanisms (trigger fast locking).
  3. Extend each leg section to the desired height. Ensure the leg locks are securely fastened after adjustment.
  4. Adjust the leg angles for optimal stability.

3.2 Attaching the Fluid Head

The fluid head comes pre-attached to the tripod. Ensure it is securely tightened before use.

3.3 Mounting Your Camera

  1. Locate the quick release plate on the fluid head.
  2. Press the plate release button to detach the quick release plate.
  3. Attach the quick release plate to the bottom of your camera using the 1/4" or 3/8" screw. Ensure it is tightly secured.
  4. Slide the camera with the attached quick release plate back into the fluid head until it clicks into place. Verify it is locked by gently attempting to lift the camera.
Diagram showing quick release plate installation and removal

Figure 3: Quick Release Plate Operation

3.4 Adjusting the Handle

The detachable handle can be adjusted for left or right-handed operation. Loosen the handle adjustment knob, position the handle as desired, and then tighten the knob. You can also adjust the grip angle and forward/reverse directions for comfortable use.

Video 1: Demonstration of fluid head adjustments and quick release plate.

4. Operating Instructions

4.1 Fluid Head Adjustments

The professional-grade fluid head allows for smooth camera movements. It supports a tilt range of +90° to -75° and 360° panoramic rotation.

  • Tilt Adjustment: Use the handle to tilt the camera up or down. The hydraulic damping ensures smooth vertical movement.
  • Panoramic Rotation: The fluid head features infinitely adjustable damping for 360-degree horizontal rotation. Adjust the horizontal damping adjustment ring to achieve your desired level of resistance for smooth panning shots.
  • Leveling: Use the integrated bubble level to ensure your camera is perfectly level before shooting.
Detailed diagram of the professional fluid head components

Figure 4: Professional Fluid Head Components

Diagram showing adjustable damping design and shooting angles

Figure 5: Adjustable Damping and Shooting Angles

4.2 Height Adjustment

The tripod's height can be adjusted from a minimum folded length of 900mm (35.43 inches) to a maximum extended length of 1915mm (75.2 inches). Unlock the leg sections, extend them to the desired height, and securely lock them in place using the trigger fast locking mechanism.

Diagram illustrating tripod height adjustments

Figure 6: Tripod Height Adjustment

5. Maintenance

  • Cleaning: Wipe down the tripod and fluid head with a soft, dry cloth after each use to remove dust and debris. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly.
  • Lubrication: The fluid head is designed for smooth operation and generally does not require user lubrication. If you experience stiffness, consult professional service.
  • Storage: When not in use, fold the tripod to its minimum length and store it in the provided storage bag to protect it from dust and damage.
  • Check Connections: Periodically check all screws and locking mechanisms to ensure they are tight and secure. A hidden hexagonal wrench is provided for minor adjustments.
Detailed view of tripod features including concealed Allen wrench

Figure 7: Concealed Allen Wrench for adjustments

6. Troubleshooting

  • Camera Movement Not Smooth: Ensure the damping adjustment rings on the fluid head are set correctly. Check for any obstructions or loose connections.
  • Tripod Instability: Make sure all leg sections are fully extended and their locks are securely fastened. Ensure the tripod is placed on a stable, level surface. The horseshoe-shaped foot pads are designed for various ground conditions; adjust as needed.
  • Quick Release Plate Stuck: Ensure the plate release button is fully depressed when attempting to remove or insert the quick release plate. Do not force the plate.
  • Difficulty Adjusting Handle: Loosen the handle adjustment knob sufficiently before attempting to change the handle's position or angle.

7. Specifications

FeatureSpecification
Brand NameK&F CONCEPT
Model NumberVA3+BV60
TypeProfessional Tripod
UseVideo Camera
MaterialAluminum alloy
Head TypeFluid Head
Tilt Angle+90° / -75°
Rotation Angle360° panoramic shooting
Load Capacity10 kg (22 lbs)
Base Diameter75mm
Head Attachment1/4" and 3/8"
Max Extended Length1915mm (75.2 in)
Folded Length900mm (35.43 in)
Minimum Height90cm (35 in)
Number of Leg Sections3
Maximum Tube Diameter18mm
Net Weight4.55 kg (10.14 lbs)
Leg Locking StructureTrigger
QR Plate CompatibilityDJI RS2 RS3 RS4 / Manfrotto 501PL 504PL
Table of specifications for the VA3+BV60 tripod

Figure 8: Detailed Product Specifications

8. Warranty and Support

This K&F CONCEPT VA3+BV60 Fluid Head Tripod comes with a 1-year warranty from the date of purchase. For technical support, warranty claims, or any product-related inquiries, please contact the official K&F CONCEPT customer service or your authorized dealer.

9. User Tips

  • Always ensure your camera is securely mounted to the quick release plate and the plate is locked into the fluid head before use.
  • Experiment with the damping adjustments to find the perfect resistance for your specific camera setup and desired shot type.
  • When shooting outdoors, utilize the non-slip rubber feet for enhanced stability on uneven terrain.
  • For quick transitions between different camera setups, take advantage of the dual-mode quick release plate compatibility with DJI RS2/RS3/RS4 and Manfrotto gimbals.
  • Keep the included hexagonal wrenches handy for on-the-go adjustments and maintenance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.