Introduction
Thank you for choosing the Homcom Electric Heater. This manual provides important information for the safe and efficient operation of your new heater. Please read it thoroughly before use and keep it for future reference.
This low-consumption radiant panel heater is designed for immediate use in your home or office, offering adjustable power, multiple heating modes, and convenient control features.
Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Read all instructions before using this heater.
- Do not use this heater outdoors.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater includes an overheat protection function that automatically shuts off the unit if it detects excessive temperature.
Product Overview
Key Features:
- Adjustable power settings: 1830W and 2180W for efficient heating.
- Three heating modes to suit various comfort needs.
- Adjustable thermostat to maintain a constant temperature between 7°C and 35°C.
- 24-hour programmable timer for scheduled operation.
- Intuitive LED touch screen for easy adjustment and control.
- Overheat protection for enhanced safety.
- Designed for low consumption and requires no complex installation.
- Suitable for heating areas of 12-18 m².
Setup
- Unpacking: Carefully remove the heater from its packaging. Retain packaging for storage or in case of return.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from any combustible materials (furniture, curtains, etc.). Do not place the heater directly below a power outlet.
- Power Connection: Ensure the heater is switched off before plugging it into a standard 220-240V / 50-60Hz AC power outlet. The power cord length is 1.5m.
Operating Instructions
Control Panel Overview:
- Power Button (⏻): Press to turn the heater ON or OFF.
- Mode Button (MODE): Press to cycle through the three heating modes (Low, Medium, High).
- Temperature Adjustment (+/-): Use these buttons to set your desired temperature between 7°C and 35°C. The LED display will show the current temperature setting.
- Timer Button (⏱): Press to activate and set the 24-hour programmable timer. Use the +/- buttons to adjust the desired operating duration.
Initial Operation:
- Plug the heater into a suitable power outlet.
- Press the Power button (⏻) to turn the heater on.
- Select your desired heating mode using the Mode button.
- Adjust the temperature using the +/- buttons.
- (Optional) Set the timer for automatic shut-off or turn-on.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Always unplug the heater from the power outlet and allow it to cool down completely before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or solvents.
- Storage: If storing the heater for an extended period, clean it thoroughly and store it in a cool, dry place, preferably in its original packaging.
- No User-Serviceable Parts: This heater contains no user-serviceable parts. Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified service personnel.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. |
|
|
| Heater produces no heat. |
|
|
| Heater turns off unexpectedly. |
|
|
Specifications
| Attribute | Value |
|---|---|
| Model | 820-244 |
| Color | Black and White |
| Material | Steel, Plastic |
| Total Measurements (LxWxH) | 60 cm x 18.5 cm x 39.5 cm |
| Power | 1830W / 2180W |
| Coverage Capacity | 12-18 m² |
| Temperature Range | 7-35°C |
| Cable Length | 1.5 m |
| Rated Voltage/Frequency | 220-240 V / 50-60 Hz |
| Rated Current | 8.31-9.08 A |
| Compliance | CE (LVD, ROHS, ERP, EMC) |
User Tips
- For optimal heating, ensure the room size is within the recommended coverage capacity of 12-18 m².
- Utilize the 24-hour timer to pre-heat your room before you arrive or to turn off the heater automatically when you leave or sleep, saving energy.
- Keep the area around the heater clear to ensure proper air circulation and prevent the overheat protection from activating unnecessarily.
Warranty and Support
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
