LHY AUDIO LHY 12V Linear Power Supply

Contents

LHY 12V DC Linear Power Supply User Manual

Model: LHY 12V Linear Power Supply

1. Introduction

The LHY 12V DC Linear Power Supply is a high-performance, ultra-low noise power solution designed to provide a clean and stable DC 12V output for sensitive audio equipment, such as the Mytek Brooklyn DAC decoder and other devices with strict power supply requirements. This power supply is engineered to minimize ripple and interference, ensuring optimal audio performance by delivering a pure and stable power source.

Key features include a precision voltage stabilizing circuit, high-quality components, and robust construction to achieve exceptional audio clarity and dynamic range.

Front view of the LHY 12V Linear Power Supply
Figure 1: Front view of the LHY 12V Linear Power Supply, showing the LHY AUDIO branding and digital voltage display.

2. Setup

  1. Unpacking: Carefully remove the power supply and all accessories from the packaging. Verify that all components are present, including the power supply unit and the DC output power cord.
  2. Placement: Place the power supply on a stable, flat surface, ensuring adequate ventilation around the unit. Avoid placing it near heat sources or in enclosed spaces.
  3. Input Voltage Selection: The power supply supports AC 230V, with AC 115V as an optional configuration. Ensure the unit is configured for your local mains voltage before connecting to power. (Note: This selection is typically made at the time of purchase or internally configured. Do not attempt to change voltage settings without proper knowledge.)
  4. AC Power Connection: Connect the AC power cord to the Swiss-imported Shute socket on the rear panel of the linear power supply. Plug the other end into a suitable AC mains outlet.
  5. DC Output Connection: Connect the provided ultra-luxury CARDAS OYAIDE DC output power cord (aviation 3P to DC5525) to the 1 3P imported PLT aviation output female seat on the rear panel of the power supply. Connect the DC5525 end to your compatible audio device (e.g., Mytek Brooklyn DAC).
Rear panel of the LHY 12V Linear Power Supply
Figure 2: Rear panel connections, showing the AC INPUT and DC OUTPUT ports.
LHY Linear Power Supply with included DC output cable
Figure 3: The LHY Linear Power Supply shown with its high-quality DC output cable.

3. Operating Instructions

  1. Power On: After ensuring all connections are secure, press the power button on the front panel of the LHY Linear Power Supply. The digital display will illuminate, showing the output voltage (e.g., 12.0V).
  2. Operation: The power supply will immediately begin delivering clean DC 12V power to your connected audio device. No further user interaction is typically required during operation. The unit is designed for stable and continuous performance.
  3. Power Off: To turn off the unit, press the power button again. The digital display will turn off, indicating the power supply is no longer active.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the power supply. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
  • Ventilation: Ensure that the ventilation slots on the unit are not obstructed to prevent overheating.
  • Storage: If storing the unit for an extended period, disconnect it from the power outlet and store it in a cool, dry place away from direct sunlight and extreme temperatures.
  • Internal Components: The unit contains no user-serviceable parts. Do not open the casing, as this may void the warranty and expose you to electrical hazards.

5. Troubleshooting

  • No Power/No Display:
    • Check if the AC power cord is securely connected to both the power supply and the wall outlet.
    • Ensure the wall outlet is functioning correctly by testing it with another device.
    • Verify that the power button on the front panel is pressed.
  • No Output to Audio Device:
    • Confirm that the DC output cable is securely connected to both the power supply and your audio device.
    • Ensure your audio device is compatible with a 12V DC input.
    • Check the power status of your audio device.
  • Unusual Noise/Performance Issues:
    • Ensure the power supply is placed on a stable surface and not vibrating.
    • Verify that all cables are properly connected and not damaged.
    • If issues persist, disconnect the unit and contact customer support.

6. Specifications

Feature Detail
Brand Name LHY AUDIO (GZHYAJIN)
Input Voltage AC 230VAC (115V optional)
Output Voltage DC 12V
Output Terminal 1 x 3P imported PLT aviation output female seat
Rated Power 80W
Ripple Value As low as 16µV
Overall Dimensions (W x H x D) 130mm x 60mm x 250mm
Overall Weight 3.0 KG
Key Components Swiss-imported Shute AC input socket, German BLOCK80VA toroidal transformer, precision OP amplifier, +MOS field effect transistor, LC filter (imported electrolytic capacitors and inductors), ONMUR860 fast recovery rectifier diode, Japan NICHICON audio special filter electrolysis, Germany WIMA small capacity electrodeless capacitor.
Internal Wiring Single crystal copper and silver plating machine for internal connection, 4% W BT solder containing silver.
Accompanying Accessories Ultra-luxury CARDAS OYAIDE DC output power cord (aviation 3P to DC5525)
Internal view of the LHY Linear Power Supply with labeled components
Figure 4: Internal view highlighting key components such as the German BLOCK transformer, EMI filter, high current MOS tube, multi-stage filter, and op-amp module.
Oscilloscope reading showing 16µV ripple value
Figure 5: Oscilloscope measurement demonstrating the ultra-low 16µV ripple value of the power supply output.

7. User Tips

  • For optimal audio performance, ensure the power supply is connected to a dedicated power outlet if possible, to minimize interference from other household appliances.
  • Allow the unit a few minutes to warm up after powering on for the most stable output, especially in colder environments.
  • While designed for low noise, keeping the power supply physically separated from sensitive audio components can further reduce any potential electromagnetic interference.

8. Warranty and Support

This product comes with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and service procedures, please refer to the documentation provided at the time of purchase or contact your retailer/manufacturer directly.

For technical support, troubleshooting assistance, or inquiries regarding repairs, please contact the seller or manufacturer through their official support channels. Provide your product model and purchase details when seeking assistance.

© 2024 LHY AUDIO. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.