Introduction
This manual provides detailed instructions for the safe and efficient use of your Automatic Chicken Feeder. Designed for various poultry and pets, this feeder ensures consistent and controlled feeding. Please read this manual thoroughly before installation and operation.
Important Safety Warnings
Electrical Safety
- Plug Matching: The plug of the power tool must be compatible with the socket. Never modify the plug in any way.
- Avoid Electric Shock: When operating, avoid contact with grounded surfaces (such as pipes, radiators, refrigerators, etc.).
- Moisture Protection: Do not expose the power tool to rain or humid environments. Water entering the power tool increases the risk of electric shock.
- Handle the Cord: Never move, pull, or unplug the power cord. Keep the cord away from heat sources, oil, sharp edges, or moving parts.
Workplace Safety
- Keep Clean: Work areas should be kept clean and well-lit. Cluttered or dark areas can easily lead to accidents.
- Avoid Hazardous Environments: Do not operate power tools in environments with flammable liquids, gases, or dust (explosive atmospheres). Sparks from power tools may ignite dust or fumes.
- Keep Out of Reach: Keep children and bystanders away from power tools while operating them. Distraction may cause you to lose control.
Personal Safety
- Stay Alert: Stay alert and focused while operating the tool. Do not use the tool when fatigued or under the influence of drugs or alcohol.
- Protective Equipment: Wear a dust mask, non-slip safety shoes, a safety helmet, and hearing protection as needed.
- Prevent Accidental Start-up: Ensure the switch is in the off position before connecting to power. Do not place your fingers on the switch when handling the tool.
- Remove Adjustment Tools: Always remove the adjustment key or wrench before starting the tool.
- Maintain Balance: Do not overextend; always maintain a stable foothold and body balance.
- Dress Appropriately: Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
Setup
Before installing the automatic feeder, you will need to prepare a suitable bucket for storing feed and a stable support structure (shelf or hanging point).
- Prepare the Bucket and Support:
You will need a bucket (preferably with a lid) for feed storage and a shelf (iron or wood) with a middle hole, or a suitable point for rope suspension. - Mark and Cut Holes:
Use the provided template (if applicable) to mark the positions for four screw holes and a central opening on the bottom of your feed bucket. Carefully cut these holes using appropriate tools.
Image: Step-by-step guide for marking and cutting holes in the bucket for feeder installation.
- Install the Feeder Unit:
Install the main body of the automatic feeder to the prepared bucket using the nuts and gaskets. Ensure a secure fit to prevent feed leakage.
Image: Installation of the feeder body, nuts, and gaskets into the bucket.
- Position the Feeder:
The feeder can be fixed on a shelf or suspended by a rope. Choose the method that best suits your setup and ensures stability.
Image: Two installation methods: fixed on a shelf or rope suspended.
- Connect Power:
Ensure the feeder's switch is in the OFF position. Plug the power cord into a compatible power outlet. The feeder comes with a 5-meter national standard power cord.
Operating Instructions
Feed Compatibility
The feeder is designed for various types of dry, granular feed. Ensure the feed length does not exceed 10 mm. Do NOT use powder, wet material, wheat husk, bran, or any feed that does not flow easily, as this can cause blockages and damage the unit.

Image: Examples of suitable feed types and particle sizes (0.1-1cm diameter).
Basic Operation
- Fill the Feed Bucket: Pour the appropriate dry, granular feed into the installed bucket.
- Adjust Feed Flow (if applicable): Use the adjustment knob to precisely control the feed ration.
- Power On: Once the feeder is securely installed and filled, switch the unit to the ON position.
- Timer Operation (for models with timer): If your model includes a timer, set the desired feeding schedule according to the timer's instructions. The timer will automatically dispense feed at programmed intervals.

Image: Automatic feeder in operation, dispensing feed to chickens, connected to a timer.
- Monitor Feeding: Regularly check that the feeder is dispensing feed correctly and that your animals are accessing it.
- Power Off: To stop the feeder, press the power off button (if applicable) and unplug the power cord from the outlet.
Operation Demonstration Video
Video: This video demonstrates the automatic chicken feeder in action, dispensing feed at timed intervals.
Maintenance and Care
Cleaning
WARNING! Always unplug the tool from the socket before performing any cleaning or maintenance.
- Clean the tool casing with a soft, damp cloth. Do not use any abrasive or solvent-based cleaners, as these can damage the unit.
- Clean the vents regularly to prevent dust buildup. It is recommended to use compressed air to blow dust out of the vents.
Storage
- Store the feeder in a dry, safe place out of reach of children and pets.
- When storing, if applicable, place the forward/reverse switch in the middle position (locked) to prevent accidental activation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Feeder not dispensing feed | Power not connected; Feed type unsuitable; Feed port blocked; Motor malfunction. | Check power connection; Ensure feed meets specifications (dry, granular, <10mm); Clear any blockages in the feed port; Contact support if motor is faulty. |
| Inconsistent feed dispensing | Feed consistency issues; Adjustment knob setting incorrect. | Ensure feed is uniform and flows freely; Adjust the feed flow knob for desired output. |
| Timer not working (with timer model) | Timer not programmed correctly; Timer unit faulty. | Refer to timer's specific instructions for programming; Test timer independently; Contact support if timer is faulty. |
| Unusual noise during operation | Foreign object in mechanism; Worn gears/motor. | Unplug and inspect for foreign objects; If noise persists, contact support. |
Specifications
| Feature | Detail |
|---|---|
| Product Name | Automatic Feeder |
| Input Voltage | 220V |
| Frequency | 50Hz |
| Power | 18W |
| Speed | 10 r/min |
| Material | Plastic / Metal |
| Feed Diameter | 0.1 - 1 cm (1mm - 10mm) |
| Dimensions (Feeder Unit) | Approx. 23 cm (Length) |
| Battery Included | No |
| Origin | Mainland China |

Image: Labeled diagram of the feeder unit with key components and approximate dimensions.

Image: Internal components of the feeder, highlighting the pure copper wire motor and large metal gear for stable performance and smooth transmission.
User Tips
- Choose the Right Model: Consider if you need the 'with timer' version for automated feeding schedules or the 'without timer' version for manual control or use with an external timer.
- Feed Type is Crucial: Always use dry, granular feed that flows easily. Avoid powdery or wet feeds to prevent clogging and ensure smooth operation.
- Regular Cleaning: A quick wipe-down and clearing of the feed path can prevent buildup and extend the life of your feeder.
- No WiFi Required: This feeder operates independently or with its integrated timer (if applicable) and does not require a WiFi connection for functionality.
Frequently Asked Questions
- Q: Does this product require WiFi?
- A: No, the Automatic Chicken Feeder operates either manually or via its built-in timer (for models with this feature). It does not require a WiFi connection.
Warranty and Support
Compliance Statement
This product complies with the essential requirements of relevant EU directives and bears the CE mark.
Manufacturer Information
Jiaxing yingji trading co. ltdChina
Jiaxing Zhejiang Province
North of 1st floor, no. 142 xiyun community, yangqiao village,
jiashan county, jiaxing city, zhejiang province, zhejiang province 314000
Phone: 86-19519331726
Email: 1662953042@qq.com
Important Note: This manual is intended to provide general guidance. Actual operation must be based on actual site conditions and professional electrical standards. We reserve the right to update this manual as needed for product improvements; the latest version can be downloaded from our website.
For further assistance or to view the full user manual in PDF format, please refer to the official document: User Manual (PDF)