1. Product Overview
The EENOUR Auto Tumbler Heat Press Machine is designed for seamless and efficient sublimation printing on various drinkware. It features automatic pressing, rotation, and precise digital control for temperature, time, and pressure, ensuring high-quality full prints on tumblers, glasses, and mugs.

2. Safety Instructions
- Always wear heat-resistant gloves when handling hot items or machine parts.
- Ensure the machine is placed on a stable, heat-resistant surface.
- Keep hands clear of the heating element during operation.
- Do not operate the machine for more than 1.5 hours continuously. Allow a 20-minute cool-down period after prolonged use.
- Unplug the machine from the power outlet when not in use or before cleaning/maintenance.
- Use the emergency stop button for immediate shutdown if needed.
3. Setup
- Unpacking: Carefully remove the heat press machine and all accessories from the packaging. Inspect for any damage.
- Placement: Place the machine on a flat, stable, and heat-resistant workbench. Ensure adequate ventilation around the machine.
- Power Connection: Connect the power cord to the machine and then to a grounded electrical outlet.
- Initial Power On: Flip the main power switch (usually located on the side) to the 'ON' position. The digital display should illuminate.
4. Operating Instructions
4.1 Control Panel Overview
The control panel features a digital display for temperature, time, and counter, along with buttons for mode selection, setting adjustments, and start/stop functions.

4.2 Setting Parameters
The machine offers 4 pre-set and memory modes. Modes 1-3 include auto-rotation, while Mode 4 is for items that do not require rotation (e.g., standard mugs).
- Temperature Range: 0-410℉
- Timer Range: 0-399 seconds
- Pressure Setting: Digital adjustment (larger 'dn' value indicates greater pressure).

4.3 Operation for Straight Tumblers & Glasses (Modes 1-3)
- Prepare Item: Wrap your sublimation design around the tumbler or glass and secure it with heat-resistant tape.
- Select Mode: Choose a mode from 1-3 on the control panel.
- Set Parameters: Adjust the temperature, time, and pressure value according to your material and design requirements.
- Pre-heat: Allow the machine to reach the set temperature. It is recommended to place a blank tumbler in the machine during pre-heating to prevent damage to the attachment.
- Insert Item: Once heated, carefully insert the prepared tumbler or glass into the heating element.
- Start Press: Press the 'START' button. The machine will automatically press, release, and rotate the item (100°-150° after the first press) to ensure a full, even print.
- Completion: An alarm will sound upon completion. Carefully remove the hot item using heat-resistant gloves.

4.4 Operation for Mugs (Mode 4)
- Prepare Item: Wrap your sublimation design around the mug and secure it with heat-resistant tape.
- Select Mode: Choose Mode 4 on the control panel.
- Set Parameters: Adjust the temperature, time, and pressure value.
- Pre-heat: Allow the machine to reach the set temperature. Place a blank mug in the machine during pre-heating.
- Insert Item: Carefully insert the prepared mug into the heating element.
- Start Press: Press the 'START' button. The machine will automatically press and release. Note that Mode 4 does not include auto-rotation.
- Completion: An alarm will sound upon completion. Carefully remove the hot item using heat-resistant gloves.

4.5 Automatic Press and Release
The machine is designed for automatic pressing and release based on the set pressure value. Once the process is complete, the heating element will automatically open.

4.6 Auto Rotation for Full Sublimation
For tumblers and glasses, the machine automatically rotates the item by 100°-150° after the initial press to ensure full, seamless sublimation without manual intervention.

4.7 Emergency Stop
For safety, the machine is equipped with a quick emergency stop button. Press this button to immediately halt any operation.

5. Maintenance
- Cleaning: Ensure the machine is unplugged and completely cool before cleaning. Wipe down exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or immerse the machine in water.
- Heating Attachment: The heating attachment is a consumable part and typically needs replacement every 3-6 months, especially if you notice bubbling or improper heating. Contact customer support for replacements.
- Storage: Store the machine in a dry, dust-free environment when not in use.
6. Troubleshooting
- Problem: Tumbler attachment is damaged or bubbled.
- Solution: This is an occasional issue that has been addressed with upgraded attachment quality. If this occurs, contact EENOUR customer support for a free replacement if your machine is under the protection period.
- Problem: Auto-rotation function is not working.
- Solution: Ensure you have selected Modes 1-3. Mode 4 does not have the auto-rotation function. Select the correct press mode for your item.
- Problem: Machine does not close completely.
- Solution: This is normal. The machine is designed to auto-rotate the tumbler 100°-150° after the first press and then heat press again to achieve a full print. It does not need to close completely throughout the process.
- Problem: Machine shows a temperature difference.
- Solution: A small temperature difference is normal and will not affect the sublimation result. If the difference is over 30℉, please contact EENOUR customer support for assistance or a replacement.
7. Specifications
| Feature | Specification |
|---|---|
| Model | Auto Tumbler Heat Press Machine (CH2304) |
| Pressure | Accurate Digital Setting |
| Temperature Range | 0-410℉ |
| Timer Range | 0-399 seconds |
| Diameter Range | 2.75"-3.38" |
| Compatible Items | 11-32oz Stainless Steel Tumblers, 16-25oz Glasses, 11-16oz Ceramic and Enamel Mugs |
| Dimensions (H x W x D) | 14.2 inches x 12.4 inches x 7.7 inches |
| Heating Element | Silicone Thermal Pad, High Density Heat Wire, Heater Protection, Thickened & Durable Fiber |
| Features | Auto Press, Auto Rotate (Modes 1-3), Digital Pressure Setting, 4 Memory Modes, Use Times Records |


8. User Tips
- To prevent damage to the heating attachment and avoid bubbling, always place a blank tumbler or mug in the machine when it is heating up.
- For optimal machine longevity, avoid continuous operation for more than 1.5 hours. If prolonged use is necessary, turn off the machine for 20 minutes to allow it to cool down before resuming.
- Experiment with the pressure settings to find the ideal 'dn' value for different materials and desired print quality.
9. Warranty and Support
EENOUR provides customer support for product inquiries, troubleshooting, and warranty claims. If your machine or its heating attachment experiences issues within the protection period, you may be eligible for a free replacement.
For assistance, please contact EENOUR customer service through the seller's platform or official website.