1. Introduction
The GEYA GYHO9 Manual Transfer Switch (MTS) is designed for manually transferring power between a main power source and an alternate (standby) power source. This device ensures a safe and reliable method for switching electrical loads, commonly used in scenarios requiring backup power during utility failures.
When installed and operated correctly, the GYHO9 MTS provides a straightforward solution for managing power sources, enhancing system resilience and operational continuity.

2. Safety Information
- Installation and maintenance should only be performed by qualified personnel.
- Always disconnect all power sources before working on the switch or connected circuits.
- Ensure proper grounding to prevent electrical shock.
- Verify voltage and current ratings of the switch match the application requirements.
- Do not operate the switch if it appears damaged or malfunctioning.
3. Product Features
- Dual Power Manual Conversion: Allows for safe and manual switching between two power sources.
- Indicator Lights: Clearly marked power positions with indicator lights (Red, Green, Yellow) to easily identify the active power source.
- Label Window: Integrated label window for clear and easy identification of power sources.
- DIN Rail Mounting: Designed for convenient installation on a standard DIN rail.
- Robust Construction: Built for durability and reliable performance with a mechanical life of 10,000 cycles.

4. Specifications
| Attribute | Value |
|---|---|
| Model Number | GYHO9 MTS |
| Brand Name | GEYA |
| Type | Mini Circuit breaker, Manual Transfer Isolating Switch |
| Rated Voltage (Ue) | AC220/400V (220/380V) |
| Rated Current | 63A (Also available in 100A, 125A) |
| Poles | 2P (Also available in 1P, 3P, 4P) |
| Rated Frequency | 50/60Hz |
| Standard | IEC/EN60947-3 |
| Mounting | Din Rail |
| New Design | with Indicator Red Green Yellow Color |
| Mechanical Life | 10000 Cycles |
| Cable Size (63A) | Max 10mm² |
| Cable Size (100A/125A) | Max 50mm² |
| Origin | Mainland China |
| Certification | CE |
| Is Smart Device | No |
| High-concerned chemical | None |
Dimensions


5. Installation
5.1 Mounting
The GEYA GYHO9 MTS is designed for DIN rail mounting. Ensure the DIN rail is securely fastened within the electrical enclosure. Snap the switch onto the DIN rail by aligning the clips and pressing firmly until it locks into place.
5.2 Wiring
Refer to the circuit diagram below for proper wiring connections. Ensure all connections are tight and secure to prevent loose contacts and overheating.
- Input 1 (Main Power): Connect the main power source to terminals 1 and 5 (for 2P model).
- Input 2 (Standby Power): Connect the standby power source to terminals 3 and 7 (for 2P model, or corresponding terminals for other pole configurations).
- Load Output: Connect the electrical load to terminals 2, 4, 6, 8 (for 2P model, or corresponding terminals for other pole configurations).
- Ensure correct phase and neutral connections as per local electrical codes.

Cable Size Recommendations:
- For 63A models: Max 10mm² cable.
- For 100A/125A models: Max 50mm² cable.
6. Operating Instructions
The GYHO9 MTS features a clear knob position and indicator lights for easy operation:
- Position 1 (Main Power ON): When the knob is in position '1', the main power source is connected to the load. The indicator light for position '1' will be Red.
- Position O (OFF): When the knob is in position 'O', both power sources are disconnected from the load. This is the neutral or OFF position. The indicator light for position 'O' will be Green.
- Position 2 (Standby Power ON): When the knob is in position '2', the standby (alternate) power source is connected to the load. The indicator light for position '2' will be Yellow.
To switch between power sources, simply move the knob to the desired position. Always ensure a smooth and deliberate movement of the knob.
7. Maintenance
Regular maintenance helps ensure the longevity and safe operation of your GYHO9 MTS.
- Visual Inspection: Periodically inspect the switch for any signs of physical damage, discoloration, or loose connections.
- Cleaning: Keep the switch clean and free from dust and debris. Use a dry, non-abrasive cloth for cleaning. Do not use liquids or solvents.
- Terminal Tightness: Check terminal screws periodically to ensure they remain tight. Loose connections can cause overheating and potential hazards.
- Functionality Test: Occasionally test the transfer function by switching between positions 1, O, and 2 to ensure smooth operation and correct indicator light display.
8. Troubleshooting
- No Power Transfer:
- Check if both main and standby power sources are active.
- Verify all wiring connections are secure and correct according to the circuit diagram.
- Ensure the switch handle is fully engaged in position '1' or '2'.
- Indicator Light Not Working:
- Confirm power is supplied to the corresponding input.
- Check for loose internal connections (requires professional inspection).
- Switch Handle Stiff or Stuck:
- Do not force the handle.
- Inspect for any obstructions or foreign objects.
- If the issue persists, contact a qualified electrician or GEYA support.
9. User Tips
- Pre-transfer Check: Before switching to standby power, ensure non-essential loads are turned off to prevent overload.
- Regular Testing: Periodically test your standby power source and the transfer switch to ensure readiness for an outage.
- Clear Labeling: Utilize the label window to clearly mark your main and standby power sources for quick identification during an emergency.
10. Certifications & Support
The GEYA GYHO9 Manual Transfer Switch is certified to meet various international industry standards, ensuring quality and safety:
- CE: Conforms to European safety, health, and environmental protection requirements.
- IEC/EN60947-3: Complies with the international standard for low-voltage switchgear and controlgear.
- Other certifications include CCC, CB, SAA, SEMKO, TUV, and RoHS.
For technical support or further inquiries, please refer to the official GEYA website or contact your local distributor.
GEYA Company Overview
Video 1: GEYA Company Introduction - Showcasing manufacturing processes and product range.