LCTC PMA900

Contents

LCTC PMA900 PID Temperature Controller User Manual

Model: PMA900

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the LCTC PMA900 PID Temperature Controller. The PMA900 is a high-precision ramp and soak PID controller designed for various industrial and laboratory applications requiring accurate temperature regulation with programmable profiles. It features a 96x96 LED panel, supports multiple input types (TC/RTD), and offers versatile dual output options.

2. Key Features

  • LCD display with high brightness backlight screen and wide viewing angle.
  • High accuracy: 0.2% F.S.
  • Supports up to 50 programmable segments for ramp and soak profiles.
  • Manual/Automatic control switching capability.
  • Includes working status indicators.
  • Master/Slave function for advanced control setups.
  • Default 2 group alarms.
  • Multiple input types: TC (K, E), RTD (PT100, CU50), and 4-20mA analog signal.
  • Dual output options: SSR, Relay, 0-10V, or 4-20mA.

3. Product Overview

The LCTC PMA900 is a versatile temperature controller available in various panel sizes, with the PMA900 model specifically featuring a 96x96mm panel. It is designed for precise temperature control in complex processes.

Front view of LCTC PMA900 PID Temperature Controller showing PV, MV, and SV displays with control buttons.

Figure 1: Front view of the LCTC PMA900 PID Temperature Controller.

Comparison of different LCTC temperature controller sizes: MA100, MA700, MA900.

Figure 2: Various LCTC temperature controller models, including the PMA900 (MA900).

4. Specifications

FeatureSpecification
ModelPMA900
Panel Size96x96 mm
Accuracy0.2% F.S.
Input TypeTC (K, E), RTD (PT100, CU50), 4-20mA (analog signal)
Output TypeDual Output: SSR, Relay, 0-10V, 4-20mA (configurable)
AlarmsDefault 2 group alarms (configurable for 1 or 2 groups)
Programmable SegmentsMax 50 segments (Ramp/Soak)
Control ModesManual/Automatic control switching
DisplayLCD with high brightness backlight
CommunicationRS485 Modbus
Power Supply100-240VAC
Temperature Range0-400°C (depending on input type)

Dimensional Information

Table showing external dimensions and panel opening sizes for MA900, MA400, MA700, MA100 models.

Figure 3: External dimensions and panel opening sizes (Unit: mm).

5. Setup and Wiring

Proper installation and wiring are crucial for the safe and effective operation of your PMA900 controller. Refer to the wiring diagram below and ensure all connections are secure and comply with local electrical codes.

Wiring Diagram

Detailed wiring diagram for the LCTC PID Temperature Controller, showing power, output, alarm, input, and RS485 terminals.

Figure 4: Wiring Diagram for PMA900 Controller.

Terminal Connections

  • Power (100-240VAC): Connect to terminals 1 and 2.
  • Output 1: Connect to terminals 3 and 4 (type depends on selected model: SSR, Relay, 0-10V, or 4-20mA).
  • Output 2: Connect to terminals 5 and 6 (type depends on selected model: SSR, Relay, 0-10V, or 4-20mA).
  • Common (COM): Terminal 7.
  • Alarm 1 (AL1): Normally Open (NO) to terminal 8, Normally Closed (NC) to terminal 9.
  • Alarm 2 (AL2): Normally Open (NO) to terminal 10, Normally Closed (NC) to terminal 11.
  • Input (TC/RTD): Connect sensor to terminals 12 and 13.
  • RS485 Communication: Connect to terminals 14 and 15.
  • Analog Output (AO 24V): Connect to terminals 16 and 17.
  • Common (COM): Terminal 22.
  • Open (OPEN): Terminal 23.
  • Close (CLOSE): Terminal 24.

Ensure all connections are tight and insulated. Incorrect wiring can damage the device or lead to unsafe conditions.

6. Operating Instructions: Ramp and Soak Program Setup

The PMA900 controller supports programmable ramp and soak profiles. The following steps outline how to set up a basic 4-segment program, as demonstrated in the instructional video.

Video 1: Demonstration of setting up a ramp and soak program on the controller.

  1. Enter Program Mode: Press the "SET" button repeatedly until the display shows program segments (e.g., "sv01", "sv02", etc.).
  2. Segment 1 Setup (sv01):
    • When "sv01" is displayed, use the arrow keys to set the desired temperature (e.g., 50 degrees).
    • Press "SET" to move to the time setting for "sv01". Use the arrow keys to set the desired duration (e.g., 30 minutes).
    • Press "SET" again to save the settings for Segment 1.
  3. Segment 2 Setup (sv02):
    • When "sv02" is displayed, use the arrow keys to set the desired temperature (e.g., 100 degrees).
    • Press "SET" to move to the time setting for "sv02". Use the arrow keys to set the desired duration (e.g., 30 minutes).
    • Press "SET" again to save the settings for Segment 2.
  4. Segment 3 Setup (sv03):
    • When "sv03" is displayed, use the arrow keys to set the desired temperature (e.g., 70 degrees).
    • Press "SET" to move to the time setting for "sv03". Use the arrow keys to set the desired duration (e.g., 30 minutes).
    • Press "SET" again to save the settings for Segment 3.
  5. Segment 4 Setup (sv04):
    • When "sv04" is displayed, use the arrow keys to set the desired temperature (e.g., 20 degrees).
    • Press "SET" to move to the time setting for "sv04". Use the arrow keys to set the desired duration (e.g., 30 minutes).
    • Press "SET" again to save the settings for Segment 4.
  6. Exit Program Mode: After setting all desired segments, press the "A/M" button twice to exit the program setup and return to normal operation.

The controller will now execute the programmed ramp and soak profile.

7. Maintenance

  • Cleaning: Regularly wipe the display and panel with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Inspection: Periodically check all wiring connections for tightness and signs of wear or damage.
  • Environment: Ensure the controller is operated within its specified environmental conditions (temperature, humidity) to prevent malfunction.
  • Calibration: If accuracy issues are suspected, professional calibration may be required. Refer to the full technical manual for calibration procedures or contact support.

8. Troubleshooting

  • No Power: Check power supply connections (Terminals 1 & 2) and ensure the voltage is within the 100-240VAC range. Verify the power source is active.
  • Incorrect Temperature Reading: Ensure the sensor is correctly wired to terminals 12 & 13 and that the input type setting in the controller matches the sensor type (TC/RTD). Check for damaged sensor wires.
  • Output Not Activating: Verify that the set point (SV) and process value (PV) are correctly configured for your application. Check output wiring (Terminals 3-6) and ensure the output type is correctly selected.
  • Program Not Running: Confirm that the ramp and soak program segments are correctly entered and saved. Ensure the controller is in automatic control mode if applicable.
  • Communication Issues (RS485): Check RS485 wiring (Terminals 14 & 15) and ensure communication parameters (baud rate, parity, data bits) match the connected device.

For persistent issues, consult the full technical manual or contact LCTC customer support.

9. User Tips

No specific user tips were available from reviews or Q&A for this product. Always refer to the detailed technical manual for advanced configurations and specific application guidance.

10. Warranty and Support

The LCTC PMA900 PID Temperature Controller comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact your vendor or LCTC customer service with your purchase details.

© 2024 LCTC. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.