tungfull Universal PCB Test Stand

Contents

Tungfull Universal PCB Test Stand Instruction Manual

Safety Warnings

  • Warning! Although hand tools do not involve electricity or power, improper use can still lead to personal injury or property damage.
  • Wear protective equipment: Depending on the job risk, it is recommended to wear personal protective equipment such as goggles and gloves.
  • Keep out of reach of children: Store tools in a safe location out of the reach of children.
  • Use tools for their intended purpose: Do not use tools for purposes other than their intended design.

1. Setup

Before using the Universal PCB Test Stand, please follow these guidelines:

  1. Ensure this tool is suitable for the specific scenario and materials you intend to use it with. Refer to the specifications for details.
  2. If your work involves sawdust, dust, or other floating debris, take appropriate safety precautions to protect yourself and the equipment.
  3. If using any accessories, ensure their dimensions are completely compatible with the main unit of the test stand.

The test stand is designed to accommodate various PCB board sizes. Each model includes a corresponding ABC board. For example, the FC80X50X42 model includes an 80X50X42 ABC board. If you require additional or replacement ABC boards, please contact customer service.

The model designation indicates the maximum PCB size and test schedule. For instance, the FC80-50-42 can test a PCB board with a maximum size of 80x50mm, and 42mm indicates the test schedule (height). If you need to test different PCB boards, you can process the ABC board or use several sets of ABC boards.

The material for the ABC third board is transparent acrylic sheet, with a thickness of 8-10mm depending on the model. The frame material is electric wood, ensuring safe and secure operation.

Video: Manufacturing process, assembly, and testing demonstration of the PCB Test Stand.

2. Operating Instructions

Follow these steps for safe and effective operation of your PCB Test Stand:

  1. Choose the right tool: Select the correct type and size of tool according to the job requirements. Using unsuitable tools may result in tool damage or personal injury.
  2. Inspect before use: Before each use, inspect the tool for cracks, deformation, rust, dulling of the cutting edge, or other damage. If any damage is found, stop using it immediately and replace it.
  3. Keep tools clean: Keep the tool surface clean and dry to prevent oil from causing slippage and loss of control.
  4. Correct posture: Maintain a balanced and stable standing posture, ensuring sufficient operating space.
  5. Appropriate force: Use ergonomically designed force to avoid excessive force that could cause the tool to slip or break.

Key features for operation:

  • The cover can be opened to facilitate the welding line.
  • The A, B, and C boards are replaceable for easy customization and maintenance.
  • The distance between the B and C boards is adjustable to accommodate different PCB thicknesses.
  • The positioning pin has sufficient elastic force, and 4 additional holes are reserved for convenient increase if needed.
  • Standard fitting hole positions allow for a free choice of accessories.
  • The C board adapter plate can be rotated by 90 degrees for versatile testing configurations.
Tungfull Universal PCB Test Stand

Image: Front view of the Tungfull Universal PCB Test Stand.

3. Maintenance and Care

Proper maintenance ensures the longevity and optimal performance of your test stand:

  1. Daily Cleaning: After each use, wipe the tool surface with a clean cloth to remove dust, oil, and hand sweat. For tools with paint or coatings, avoid using organic solvents.
  2. Rust Prevention: When not in use for extended periods, keep the storage environment dry and avoid humid conditions.
  3. Regular Inspection: Inspect the handle for looseness or cracks. Repair or replace immediately if damaged. If the product has a blade, check for dulling of the cutting edge. Sharpen or replace if necessary.
  4. Proper Storage: Store tools neatly in toolboxes, cabinets, or hanging shelves, avoiding stacking or compression. Sharp tools should be stored separately or in protective covers.

4. Troubleshooting

This section provides general guidance for common issues. For more complex problems, please contact customer support.

  • Issue: Test pins not making proper contact.
    Solution: Ensure the PCB is correctly seated and aligned. Check if the ABC boards are properly installed and adjusted for the PCB thickness. Inspect test pins for damage or bending and replace if necessary.
  • Issue: Difficulty in opening or closing the cover.
    Solution: Check for any obstructions or debris in the hinge mechanism. Apply a small amount of lubricant if movement is stiff.
  • Issue: Instability during operation.
    Solution: Ensure the test stand is placed on a flat, stable surface. Verify all screws and fasteners are tightened securely.

5. Specifications

AttributeValue
Brand Nametungfull
MaterialPlastic (Frame: Electric Wood, ABC Board: Transparent Acrylic)
TypeHand Tool Parts
OriginMainland China
Acrylic Sheet Thickness8-10mm
Package Dimensions (approx.)Length: 2cm, Width: 5cm, Height: 6cm
Package Weight (approx.)4.5 kg

Model-Specific PCB Capacity:

  • Model 80-50-42: Max PCB size 80x50mm, Test Schedule 42mm.
  • Model 100-80-42: Max PCB size 100x80mm, Test Schedule 42mm.
  • Model 130-100-42: Max PCB size 130x100mm, Test Schedule 42mm.
  • Model 150-130-60: Max PCB size 150x130mm, Test Schedule 60mm.
  • Model 180-150-60: Max PCB size 180x150mm, Test Schedule 60mm.
  • Model 240-180-60: Max PCB size 240x180mm, Test Schedule 60mm.

For custom sizes larger than 240x180mm, please contact customer service.

Diagram of 240-180-60 model with dimensions

Image: Dimensional diagram for the 240-180-60 model.

Diagram of 80-50-42 model with dimensions

Image: Dimensional diagram for the 80-50-42 model.

Diagram of 100-80-42 model with dimensions

Image: Dimensional diagram for the 100-80-42 model.

Diagram of 130-100-42 model with dimensions

Image: Dimensional diagram for the 130-100-42 model.

Diagram of 150-130-60 model with dimensions

Image: Dimensional diagram for the 150-130-60 model.

Diagram of 180-150-60 model with dimensions

Image: Dimensional diagram for the 180-150-60 model.

6. User Tips

  • Always double-check the alignment of the PCB with the test pins before applying pressure to ensure accurate testing and prevent damage to the board or pins.
  • When replacing ABC boards, handle them carefully to avoid scratching the acrylic, which could affect visibility during testing.
  • Keep a set of spare test pins and small tools for adjustments readily available to minimize downtime during testing.

7. Compliance Information

This product complies with the essential requirements of relevant EU directives and bears the CE mark.

CE Mark and EC REP information

EC REP: TOCYA TRADING
33-143443019
TOCYATRADING75013@outlook.com
79 rue de patay, 75013, Paris

FR Packaging Disposal: ÉLÉMENTS D'EMBALLAGE SÉPARER ET À DÉPOSER DANS LE BAC DE TRI (Separate and dispose of packaging elements in the sorting bin).

8. Manufacturer Information & Support

Manufacturer: ShenZhen Tungfull Digital Technology Co., Ltd
Location: A302, Building 25, Hong ChaoYuan, ChangFa Mid Road, BanTian Subdistrict, LongGang District, ShenZhen, 518000, China
Phone: 86-15089309815
Email: deng0124@163.com

Important Note: This manual is intended to provide general guidance. Actual operation must be based on actual site conditions and professional electrical standards. The manufacturer reserves the right to update this manual as needed for product improvements; the latest version can be downloaded from our website.

A user manual in PDF format is also available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.