Introduction
Thank you for choosing the ENCHEN Beardo 3 Electric Hair and Beard Trimmer. This versatile grooming kit is designed for both home use and professional barbers, offering precise and efficient trimming for various hair types. Please read this manual thoroughly before using the device to ensure safe and optimal performance. Keep this manual for future reference.
Safety Information
- Do not immerse the trimmer in water. The blades are detachable and washable, but the main body is not waterproof.
- Keep the device out of reach of children.
- Do not use the trimmer if it is damaged or if the blades are broken, as this may cause injury.
- Only use the provided charging cable and adapter (if included) to charge the device.
- Avoid using the trimmer on irritated or broken skin.
- Ensure the trimmer is fully charged before first use for optimal battery life.
Package Contents
The ENCHEN Beardo 3 grooming kit includes the following items:
- ENCHEN Beardo 3 Electric Trimmer
- USB Type-C Charging Cable
- Cleaning Brush
- Lubricating Oil
- Guide Combs (various sizes)
- Instruction Manual
Image: Contents of the ENCHEN Beardo 3 grooming kit.
Specifications
| Feature | Description |
|---|---|
| Product Name | Electric Trimmer |
| Model | Beardo 3 |
| Rated Power | 5W |
| Charging Time | 1.5 hours |
| Runtime | 120 minutes |
| Charging Type | Type-C |
| Motor Speed | 8000 RPM |
| Blade Type | Self-sharpening Stainless Steel |
| Dimensions (Height) | 168mm |
| Dimensions (Width) | 32mm |
| Blade Width | 40mm |
| Wireless Communication | RF |
| Frequency | 433 MHz |
| Certification | CE |
Image: Product Parameters and Dimensions.
Image: Battery and Charging Features.
Image: Advanced Powerful Motor details.
Setup
1. Initial Charging
Before first use, fully charge the trimmer. Connect the Type-C charging cable to the trimmer's charging port and plug the other end into a suitable USB power source. The indicator light will show charging status. A full charge takes approximately 1.5 hours and provides up to 120 minutes of runtime.
Image: Battery Indicator Light.
2. Attaching and Detaching Trimmer Blades
The trimmer blades are designed for easy detachment and cleaning.
- To detach: Place your thumb on the blade assembly and push firmly in the direction of the arrow indicated on the trimmer head. The blade will pop off.
- To attach: Locate the guiding slot on the trimmer body. Align the lug of the trimmer blade with this slot and insert it properly.
- Push the back of the blade assembly onto the trimmer until you hear a 'click', indicating it is securely fastened.
Image: Detaching and Attaching Trimmer Blade.
3. Attaching Guide Combs
Select the desired guide comb for your preferred hair length. Align the comb with the trimmer blade and push it firmly until it clicks into place. Ensure it is securely attached before use.
Operating Instructions
1. Power On/Off
Press the power button located on the front of the trimmer to turn it on. Press it again to turn it off.
2. Trimming Beard and Hair
- For beard trimming, use the trimmer without a guide comb for precise edging or with a guide comb for maintaining length.
- For haircutting, select the appropriate guide comb. Start with a longer comb if unsure, and gradually reduce the length.
- Move the trimmer against the direction of hair growth for an even cut.
- The trimmer is suitable for both home use and professional barber applications.
Image: Trimmer in use for beard grooming.
3. Full Body Grooming
The ENCHEN Beardo 3 is designed as a grooming kit for full body use. It can be used to trim hair on various parts of the body, including:
- Armpit Hair
- Chest Hair
- Groin Hair
- Pubic Hair
- Back Hair
- Legs Hair
Always ensure the skin is clean and dry before trimming. Use appropriate guide combs for sensitive areas.
Image: Full Body Grooming applications.
Maintenance
1. Cleaning the Blades
Regular cleaning ensures optimal performance and hygiene.
- After each use, turn off the trimmer and detach the blade assembly as described in the 'Setup' section.
- Use the provided cleaning brush to remove any loose hairs from the blades and the trimmer body.
- Rinse the detached blades under running water. Ensure the main body of the trimmer does not get wet.
- Allow the blades to air dry completely before reattaching them to the trimmer.
Image: Easy Detach and Clean Trimmer Blades.
2. Oiling the Blades
For best cutting performance and longevity, apply a small drop of lubricating oil (provided) to the blades after every few uses, or when you notice reduced performance. Turn the trimmer on for a few seconds to distribute the oil evenly.
3. Self-Sharpening Blades
The ENCHEN Beardo 3 features self-sharpening stainless steel blades, designed to maintain their sharpness over time with proper care.
Image: Self-Sharpening Stainless Steel Blades.
Troubleshooting
- Trimmer not turning on: Ensure the trimmer is fully charged. Press the power button firmly.
- Poor cutting performance: Clean the blades thoroughly to remove any trapped hairs. Apply lubricating oil to the blades. Ensure the guide comb is correctly attached.
- Battery not charging: Check if the Type-C cable is securely connected to both the trimmer and the power source. Try a different USB power adapter.
- Excessive noise or vibration: Ensure the blade assembly is correctly attached and clicked into place. Clean and oil the blades.
User Tips
- For a smoother trim, always ensure your hair is clean and dry before use.
- When trimming sensitive areas, use a guide comb to prevent nicks and irritation.
- Regularly clean and oil your trimmer blades to maintain their sharpness and extend the life of your device.
- Store the trimmer in a dry place, away from direct sunlight and extreme temperatures.
Warranty and Support
The ENCHEN Beardo 3 Electric Hair and Beard Trimmer comes with a standard manufacturer's warranty. For warranty claims, technical support, or replacement parts, please contact the seller or refer to the warranty information provided with your purchase. Keep your proof of purchase for any warranty-related inquiries.
