PowMr POW-SunSmart 6.5KP

Contents

PowMr 6.5KW Hybrid Solar Inverter POW-SunSmart 6.5KP Instruction Manual

Model: POW-SunSmart 6.5KP

1. Introduction

The POW-SunSmart 6.5KP is a state-of-the-art solar storage inverter designed to integrate PV storage, mains charging, and energy storage, providing a stable sinusoidal AC output. Featuring advanced DSP control and sophisticated algorithms, this inverter offers high response speed and exceptional reliability, making it suitable for various industrial and residential applications.

PowMr 6.5KW Hybrid Solar Inverter POW-SunSmart 6.5KP

Image: PowMr 6.5KW Hybrid Solar Inverter POW-SunSmart 6.5KP front view with key features highlighted.

2. Key Features

  • Battery Compatibility: Supports various energy storage batteries, including lead-acid and lithium-ion types.
  • Lithium-ion Battery Activation: Features a dual activation function for lithium-ion batteries in sleep mode, allowing activation via mains or PV power.
  • Output Modes: Supports split-phase/single-phase pure sine wave output.
  • Adjustable Output Voltage: Allows adjustment of each phase voltage within 100 Vac, 105 Vac, 110 Vac, 120 Vac, and 127 Vac.
  • Dual MPPT PV Input: Equipped with two-channel PV input for simultaneous Maximum Power Point Tracking (MPPT) for charging and load capacity.
  • High MPPT Efficiency: Two-channel MPPT with up to 99.9% efficiency and a maximum single-channel current of 18 A, ideal for high-power modules.
  • Multiple Charge Modes: Offers four charging modes: PV only, mains first, PV first, and mains + PV.
  • Timed Charge/Discharge: Users can set charge and discharge times to optimize electricity costs based on time-of-use pricing.
  • Energy-Saving Mode: Reduces no-load energy losses.
  • Dual Output Modes: Provides mains bypass output and inverter output for uninterrupted power supply.
  • LCD Display: Dynamic flowchart on LCD displays real-time system data and operating status.
  • Comprehensive Protection: Includes 360° protection against short circuits, overcurrent, overvoltage, undervoltage, and overload.
  • Communication Interfaces: Supports CAN, USB, and RS485 communication.
  • Parallel Operation: Supports parallel connection of up to 6 units for a maximum combined output of 39kW.

3. Specifications

Detailed technical specifications for the POW-SunSmart 6.5KP Hybrid Solar Inverter are provided below:

Category Parameter Value
Inverter Output
Inverter Output Rated output power 6500W
Max. peak power 13000 VA
Rated output voltage 120/240 VAC (single-phase/split-phase)
Rated frequency 50/60 Hz
Output waveform Pure sine wave
Switching time 10 ms (typical value)
Parallel number 6
Battery
Battery Battery type Lithium-ion battery/lead-acid battery/user-defined battery
Rated battery voltage 48 Vdc
Voltage range 40 Vdc-60 Vdc
Max. mains/generator charge current 80 A
Max. mix charge current 140 A
PV Input
PV Input MPPT channel number 2
Max. input power 5000W+5000W
Max. Input Current 18/18 A
Max. open circuit voltage 550Vdc+550Vdc
MPPT operating voltage range 150Vdc-450Vdc
Mains/Generator Input
Mains/Generator Input Input voltage range 65VAC-140VAC
Input frequency range 50/60HZ
Bypass overload current 40A
Efficiency
Efficiency MPPT tracking efficiency 99.90%
Max. efficiency of battery 93%
General
General Dimension (L*W*H) 584.6mm x 410mm x 133mm
Weight 18.9 kg
Protection level IP20, for indoor use only
Ambient temperature -10℃ to 55℃, >45℃ derating
Noise <60 dB
Cooling mode Intelligent fan
Communication
Communication Built-in interface RS485/CAN/USB/Dry contact
External module (optional) Wi-Fi/GPRS
Certification
Certification Safety IEC62109-1, IEC62109-2, and UL1741
EMC EN61000-6-1, EN61000-6-3, and FCC 15 class B
RoHS Yes

Image: Detailed specification table for the PowMr POW-SunSmart 6.5KP inverter.

4. Package Contents

Upon opening the package, you should find the following items:

  • 1x PowMr POW-SunSmart 6.5KP Hybrid Solar Inverter
  • 1x User Manual
  • 1x Warranty Card
  • 1x Set of Screw Accessories
  • 1x Pair of Battery Terminals
  • 1x Parallel Communication Cable

Video: Unboxing the PowMr POW-SunSmart 6.5KP Hybrid Solar Inverter and its included accessories.

5. Product Overview

5.1. External Views

PowMr Inverter Product Views

Image: Various views of the PowMr Hybrid Solar Inverter, showcasing its design and form factor.

5.2. Component Identification

PowMr Inverter Labeled Components

Image: Diagram identifying the various ports and controls on the PowMr Hybrid Solar Inverter.

  1. LCD screen
  2. Physical button
  3. LED indicator
  4. ON/OFF rocker switch
  5. PV input
  6. Battery positive port
  7. Battery negative port
  8. Dry contact
  9. RS485/CAN port
  10. WIFI port
  11. USB-B port
  12. CT
  13. Grounding screw
  14. AC output (L1+L2+N)
  15. AC input (L1+L2+N)
  16. Generator port (L1+L2+N)
  17. AC input circuit breaker
  18. Parallel communication port

6. Installation and Setup

6.1. Wiring Diagrams

Proper wiring is crucial for the safe and efficient operation of the inverter. Refer to the diagrams below for guidance on split-phase and single-phase connections.

Split-phase Mode Wiring Diagram

Image: Wiring diagram for split-phase mode, showing connections to utility grid, batteries, and AC loads. Note: Ensure the open circuit voltage of the series connected PV panel does not exceed 500V; otherwise, the inverter may be damaged. Damage caused by improper configuration is not covered by the warranty.

Single-phase Mode Wiring Diagram

Image: Wiring diagram for single-phase mode, showing connections to utility grid, batteries, and AC loads. Note: Ensure the open circuit voltage of the series connected PV panel does not exceed 500V; otherwise, the inverter may be damaged. Damage caused by improper configuration is not covered by the warranty.

Detailed Split-phase Connection Diagram

Image: Detailed split-phase connection diagram with specifications for PV input, AC input, AC output, and battery. This inverter is only compatible with PV module types of single crystalline and polycrystalline. Do not connect the positive or negative terminal of the solar panel to the ground. If a single-phase 120V output is required, only a single live wire L1 or L2 needs to be connected to the input and output terminals.

6.2. Hybrid Power System Overview

Hybrid Power System Diagram

Image: Diagram illustrating the hybrid power system setup, including solar panels, generator, utility, inverter, battery, and home appliances.

6.3. Parallel Operation

The POW-SunSmart 6.5KP supports parallel operation of up to 6 units to increase total output power. Refer to the diagrams below for parallel connection configurations.

Parallel Connection Diagrams

Image: Diagrams showing configurations for two, three, and six parallel-connected solar storage inverters.

6.4. Battery Connection

The inverter is compatible with multiple 48V battery types, including AGM, GEL, FLD, LI, and SLD. Ensure correct polarity when connecting batteries.

Battery Compatibility

Image: Illustration of battery compatibility with the inverter, showing various 48V battery types.

7. Operating Instructions

7.1. Output Modes

The inverter can operate in split-phase or single-phase mode, providing different AC output configurations.

Split-phase and Single-phase Output Modes

Image: Diagrams illustrating the AC output for split-phase mode (default) and single-phase mode, including voltage configurations.

7.2. Batteryless Mode

The inverter supports a batteryless mode, allowing it to power loads directly from PV or AC sources without a connected battery.

Batteryless Mode Operation

Image: Illustration showing the inverter operating in batteryless mode, powering loads from PV/AC without a battery.

7.3. Communication

The inverter features various communication ports for monitoring and control. Refer to the component identification section for port locations.

Video: A tutorial demonstrating cable linking for the inverter, likely covering communication and power connections.

8. Maintenance

  • Regular Cleaning: Keep the inverter's ventilation openings clear of dust and debris to ensure proper cooling. Use a soft, dry cloth for cleaning.
  • Connection Checks: Periodically inspect all electrical connections (PV, battery, AC input/output) to ensure they are tight and free from corrosion.
  • Environmental Conditions: Ensure the inverter is operated within its specified ambient temperature range (-10℃ to 55℃) and in an indoor, IP20-rated environment.
  • Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure optimal performance and access to new features.

9. Troubleshooting

If you encounter issues with your inverter, refer to the following general troubleshooting steps. For detailed error codes and solutions, consult the full user manual.

  • No Power Output: Check all input power sources (PV, utility, generator) and battery connections. Ensure the AC input breaker is in the 'ON' position.
  • Inverter Not Charging Batteries: Verify PV input voltage and current are within specifications. Check battery connections and health. Ensure the correct charging mode is selected.
  • Overload Protection Triggered: Reduce the load connected to the inverter. Check for any short circuits in the load wiring.
  • Unusual Noises: While the inverter has an intelligent fan, excessive or unusual noises may indicate a problem. Ensure ventilation is not obstructed.
  • Display Errors: Note any error codes displayed on the LCD screen and refer to the detailed manual for specific diagnostic steps.

10. User Tips

  • Voltage Configuration: The inverter supports both 120V (single-phase) and 240V (split-phase) output. Ensure your system is configured correctly for your region's voltage requirements (e.g., 220V for Argentina can be achieved with the 240V split-phase output).
  • Off-Grid Capability: This is a hybrid solar inverter, meaning it can operate both on-grid (connected to utility) and off-grid (standalone with batteries). It is suitable for off-grid applications.
  • PV Panel Voltage: Always ensure that the open circuit voltage (Voc) of your series-connected PV panels does not exceed 500V to prevent damage to the inverter.
  • Parallel Expansion: If your power needs grow, remember that this inverter can be expanded by connecting up to 6 units in parallel for increased output.

11. Warranty and Support

The PowMr POW-SunSmart 6.5KP Hybrid Solar Inverter comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact PowMr customer service through their official channels. Refer to the warranty card included in your package for specific terms and conditions.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.