1. Introduction
Thank you for choosing the Homcom 2 Seater Sofa Bed. This versatile piece of furniture is designed to maximize space and provide comfort, functioning as both a stylish two-seater sofa and a convenient bed. It also features a hidden storage compartment, perfect for keeping your living area tidy. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.

2. Safety Instructions
To prevent injury or damage to your sofa bed, please observe the following safety precautions:
- Always assemble the product on a soft, clean surface to avoid scratching.
- Ensure all parts are present and undamaged before beginning assembly.
- Do not overtighten screws during assembly, as this may damage the wood.
- Keep children and pets away from the assembly area.
- Do not exceed the maximum weight capacity of 200 kg for the sofa/bed and 20 kg for the storage compartment.
- Avoid standing or jumping on the sofa bed.
- When converting between sofa and bed, ensure there are no obstructions and that fingers are clear of moving parts and hinges.
- Regularly check all fasteners to ensure they remain tight.
3. Package Contents
Please verify that all components are included in your package. If any parts are missing or damaged, contact customer service.
- Sofa frame components
- Seat and back cushions (2 removable cushions)
- Hardware pack (screws, bolts, tools if provided)
- Instruction manual
4. Assembly and Setup
This sofa bed requires assembly. Follow the instructions provided in the included assembly guide carefully. General steps include:
- Unpack all components and lay them out on a clean, soft surface.
- Attach the side arms to the main seat frame using the provided hardware.
- Secure the backrest to the frame.
- Install any support feet or glides to the base of the sofa.
- Place the seat and back cushions onto the assembled frame.
Ensure all connections are secure before use. A close-up of the hinge mechanism is shown below, which is crucial for the sofa-to-bed conversion.

5. Operating Instructions
5.1 Converting from Sofa to Bed
- Remove the two removable cushions from the sofa.
- Gently pull the front section of the seat outwards. The pull-out mechanism will extend, revealing the bed frame.
- Lower the backrest to a flat position to complete the bed surface.
- Ensure all sections are fully extended and locked into place for stability.


5.2 Converting from Bed to Sofa
- Lift the backrest to its upright sofa position until it locks.
- Push the extended front section of the bed inwards until it fully retracts under the main seat.
- Place the two removable cushions back onto the sofa.
5.3 Using the Storage Compartment
The sofa bed features a hidden storage space under the seat.
- To access, lift the main seat cushion section. It will typically hinge upwards.
- Place or retrieve items from the compartment.
- Gently lower the seat cushion back into place, ensuring it is securely closed.

6. Maintenance and Care
6.1 Cleaning the Fabric
The sofa bed is upholstered in polyester fabric. For general cleaning:
- Vacuum regularly using an upholstery attachment to remove dust and loose debris.
- For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
- For tougher stains, use a mild fabric cleaner specifically designed for polyester upholstery. Test on an inconspicuous area first.
- Allow to air dry completely. Do not use harsh chemicals or abrasive cleaners.

6.2 Frame and Mechanism Care
- Wipe the wooden frame and exposed parts with a damp cloth and mild soap, then dry thoroughly.
- Periodically check all bolts and screws and tighten them if necessary to maintain stability.
- Avoid exposing the sofa bed to direct sunlight or extreme humidity, which can damage the fabric and wood.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sofa bed is unstable or wobbly. | Loose fasteners or uneven floor. | Check and tighten all screws and bolts. Ensure the sofa bed is on a level surface. |
| Difficulty converting from sofa to bed or vice-versa. | Mechanism obstructed or not fully engaged. | Ensure no items are blocking the mechanism. Apply gentle, even pressure. Check hinges for smooth operation. |
| Storage compartment lid does not close properly. | Items inside are overfilling the compartment. | Remove some items from the storage compartment. Ensure nothing is caught in the closing mechanism. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | 833-728 / 833-728CG |
| Color | Gray / Charcoal Gray |
| Material | Polyester fabric, Foam, Eucalyptus Wood |
| Sofa Dimensions (LxWxH) | 152 cm x 101 cm x 81 cm |
| Bed Dimensions (LxWxH) | 132 cm x 198 cm x 35 cm |
| Seat Dimensions (LxWxH) | 132 cm x 67 cm x 35 cm |
| Cushion Dimensions (LxW) | 40 cm x 40 cm |
| Maximum Load (Sofa/Bed) | 200 kg (100 kg per seat) |
| Maximum Load (Storage) | 20 kg |
| Installation Method | Assembly Required |

9. User Tips
- Maximize Space: Utilize the hidden storage compartment for blankets, pillows, or other items to keep your living area clutter-free, especially in smaller apartments or studios.
- Smooth Conversion: When converting the sofa to a bed, ensure the area in front of the sofa is clear to allow the pull-out mechanism to extend fully without obstruction.
10. Warranty and Support
For warranty information, technical support, or to order replacement parts, please refer to the seller's specific warranty policy or contact the retailer where you purchased this product. Keep your proof of purchase for any warranty claims.