Novastar DH418

Contents

Novastar DH418 LED Screen Receiving Card User Manual

Model: DH418 | Brand: Novastar

1. Introduction

The Novastar DH418 is a general-purpose LED screen receiving card designed for high-stability and reliability in various environments. It is a cost-effective solution from Nova Technology, capable of loading up to 256 × 256 pixels per card and supporting up to 16 sets of RGB parallel data. The DH418 features eight standard HUB75 interfaces, ensuring robust communication and display performance.

The hardware and software design of the DH418 prioritize ease of deployment, stable operation, and simplified maintenance. It supports pixel-level brightness and chroma calibration, individual gamma adjustment for RGB, and 3D functions, significantly enhancing display effects and user experience. Its high-density connectors minimize the impact of dust and vibration, contributing to high stability. The card also supports up to 24 groups of parallel RGB data or 64 groups of serial data (expandable to 128 groups), with reserved pins for custom functions. Compliant with EMC Class B hardware design, the DH418 offers improved electromagnetic compatibility for diverse on-site setups.

Video: Overview of the Novastar DH418 LED Screen Receiving Card, showcasing its features and design.

2. Key Features

  • Pixel Level Brightness and Chroma Calibration: Works with NovaLCT and calibration platforms (e.g., CalCube MiniLED V1.1.0 or later) to correct brightness and chroma differences on individual LEDs, ensuring consistent and high-quality image display.
  • Fast Bright and Dark Line Adjustment: Allows for quick adjustment of dark or bright lines caused by module splicing, improving visual experience.
  • 3D Function: Supports 3D image output when paired with a compatible sending card.
  • Individual Gamma Adjustment for RGB: Enables separate adjustment of red, green, and blue gamma, controlling image non-uniformity at low grayscale levels and white balance offset for a more realistic image.
  • Image Rotation: Display image can be rotated in 90° increments (0°/90°/180°/270°).
  • Smart Module Support: (Requires dedicated firmware) Facilitates module ID management, storage of calibration coefficients and parameters, monitoring of module temperature, voltage, flat cable communication status, LED error detection, and recording of module run time.
  • Quick Uploading of Calibration Coefficients: Efficiently uploads calibration data to the receiving card.
  • Module Flash Management: Manages information stored in flash memory, including calibration coefficients and module ID.
  • One-Click Calibration Application: For modules with flash memory, calibration coefficients can be uploaded from the module's flash memory to the receiving card by holding the self-test button when the Ethernet cable is disconnected.
  • Mapping Function: Displays receiving card number and Ethernet port information for easy identification of locations and connection topology.
  • Pre-stored Image Settings: Customizable image displayed during startup or when the Ethernet cable is disconnected/no video signal.
  • Temperature and Voltage Monitoring: Monitors the receiving card's temperature and voltage without external peripherals.
  • Cabinet LCD Support: (If connected) Displays temperature, voltage, single run time, and total run time of the receiving card.
  • Bit Error Detection: Monitors Ethernet port communication quality and records erroneous packets to aid in network troubleshooting.
  • Dual Power Supply Status Detection: Detects the working status of dual power supplies.
  • Firmware Program Readback: Allows reading back and saving the receiving card's firmware program to a local computer (NovaLCT V5.2.0 or later required).
  • Configuration Parameter Readback: Allows reading back and saving the receiving card's configuration parameters to a local computer.
  • LVDS Transmission: (Requires dedicated firmware) Uses low-voltage differential signaling to reduce data cable count, increase transmission distance, and improve signal quality and EMC.
  • Loop Backup: Enables screen display to continue normally even if a fault occurs in one line connection, by forming a loop with primary and backup lines.
  • Dual Backup of Configuration Parameters: Stores configuration parameters in both application and factory areas, allowing restoration if needed.
  • Dual Program Backup: Stores two copies of the firmware program to prevent issues during program updates.

3. Setup and Installation

3.1 Physical Installation

The DH418 receiving card is designed for compact integration. The board thickness is not greater than 2.0 mm, and the total thickness (including components on both sides) is not greater than 8.5 mm. Ground connection (GND) is enabled for mounting holes to ensure proper grounding and stability.

For optimal stability, a 5-mm copper pillar is recommended for mounting, ensuring a 5.0 mm distance between the outer surfaces of the DH418 and hub boards after their high-density connectors are fitted together.

Novastar DH418 Receiving Card Front View

Image: Front view of the Novastar DH418 Receiving Card, showing the HUB75 interfaces and other components.

Novastar DH418 Receiving Card Back View

Image: Back view of the Novastar DH418 Receiving Card, showing the rear components and mounting points.

3.2 Electrical Connections

The recommended VCC power input for the DH418 is 5.0 V.

The DH418 features high-density connectors for data communication. It supports both 24 groups of parallel RGB data and 64 groups of serial data (expandable to 128 groups). Detailed pin configurations for these data groups, including JH1 and JH2 connectors, are available in the official user manual (PDF).

The card includes Gigabit Ethernet ports for reliable network connectivity. Ensure proper connection to the sending card and other display components.

For detailed pinout diagrams and extended function reference designs, please consult the official Novastar DH418 User Manual PDF: Novastar DH418 User Manual (PDF).

4. Operating Instructions

4.1 Indicator Status

The DH418 receiving card is equipped with two main indicators to provide operational status feedback:

IndicatorColorStatusDescription
Running IndicatorGreenFlashing once every 1sThe receiving card is functioning normally. Ethernet cable connection is normal, and video source input is available.
Running IndicatorGreenFlashing once every 3sEthernet cable connection is abnormal.
Running IndicatorGreenFlashing 3 times every 0.5sEthernet cable connection is normal, but no video source input is available.
Running IndicatorGreenFlashing once every 0.2sThe receiving card failed to load the program in the application area and is now using the backup program.
Running IndicatorGreenFlashing 8 times every 0.5sA redundancy switchover occurred on the Ethernet port and the loop backup has taken effect.
Power IndicatorRedAlways onThe power input is normal.

4.2 Software Configuration

The DH418 is configured and managed using NovaLCT software. Ensure you have NovaLCT V5.2.0 or later installed for full functionality, including firmware readback and configuration parameter readback.

  • Pixel Level Calibration: Use NovaLCT and a calibration platform (e.g., CalCube MiniLED V1.1.0) to perform pixel-level brightness and chroma calibration.
  • Dark/Bright Line Adjustment: Adjust lines caused by module splicing through the software interface.
  • 3D Function Activation: Enable 3D display mode in NovaLCT when using a compatible sending card.
  • Image Rotation: Configure display image rotation in 90° increments via NovaLCT.
  • Pre-stored Image: Customize the image displayed during startup or signal loss within the software.
  • Mapping Function: Utilize the mapping function in NovaLCT to visualize the receiving card layout and connection topology.

5. Maintenance and Troubleshooting

5.1 General Maintenance

  • Regularly check the status indicators for normal operation.
  • Ensure proper ventilation around the receiving card to prevent overheating.
  • Keep the environment free from excessive dust and moisture to maintain optimal performance and longevity.
  • Periodically check for and apply firmware updates using NovaLCT to ensure the latest features and stability improvements.

5.2 Troubleshooting Guide

Refer to the indicator status table in Section 4.1 for initial diagnosis of common issues.

  • No Display / Incorrect Display:
    • Check the Running Indicator status. If flashing 3 times every 0.5s, Ethernet connection is normal but no video source input is available. Verify the sending card output and cable connections.
    • If the Running Indicator flashes once every 0.2s, the card is using a backup program. This might indicate a previous program loading failure.
    • Ensure the power indicator is always on (red) to confirm normal power input.
  • Network Communication Issues:
    • If the Running Indicator flashes once every 3s, the Ethernet cable connection is abnormal. Check the physical cable connections between the sending card and receiving card.
    • Utilize the Bit Error Detection feature in NovaLCT to monitor Ethernet port communication quality and identify erroneous packets.
  • Program or Configuration Errors:
    • The DH418 supports Dual Program Backup and Dual Backup of Configuration Parameters. If a program update fails or configuration becomes corrupted, the system can revert to a backup.
    • Use NovaLCT to read back firmware and configuration parameters to diagnose issues.
    • For modules with flash memory, if the Ethernet cable is disconnected, you can hold down the self-test button on the cabinet to upload calibration coefficients from the module's flash memory to the receiving card.
  • Image Quality Issues (Brightness/Chroma):
    • Perform pixel-level brightness and chroma calibration using NovaLCT and a suitable calibration platform.
    • Adjust dark or bright lines and individual RGB gamma settings in NovaLCT.

6. Specifications

CategoryParameterValue
Maximum Loading CapacityPixels256x256 pixels
Electrical ParametersInput voltageDC 3.3 V to 5.5 V
Rated current0.5 A
Rated power consumption2.5 W
Operating EnvironmentTemperature-20°C to +70°C
Humidity10% RH to 90% RH, non-condensing
Storage EnvironmentTemperature-25°C to +125°C
Humidity0% RH to 95% RH, non-condensing
Physical SpecificationsDimensions70.0 mm x 45.0 mm × 8.0 mm
Net weight17.3 g
Packing InformationPacking specificationsEach receiving card is packaged in a blister pack. Each packing box contains 80 receiving cards.
Packing box dimensions378.0 mm x 190.0 mm × 120.0 mm
CertificationsStandardsRoHS, EMC Class B

Note: If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please apply for the certifications yourself or contact NovaStar to apply for them.

7. User Tips

  • Compatibility Check: Always ensure that your sending card and LED modules are compatible with the DH418 receiving card for optimal performance and feature utilization. Refer to Novastar's official documentation for compatibility lists.
  • Software Updates: Keep your NovaLCT software and DH418 firmware updated to the latest versions. Updates often include performance enhancements, bug fixes, and new features.
  • Environmental Control: While the DH418 is robust, maintaining a stable operating environment (temperature and humidity) within the specified ranges will prolong its lifespan and ensure consistent display quality.

8. Warranty and Support

This product is manufactured by Xi'an NovaStar Tech Co., Ltd. All rights reserved. No part of this document may be copied, reproduced, extracted, or transmitted in any form or by any means without the prior written consent of Xi'an NovaStar Tech Co., Ltd.

For technical support, inquiries, or to report any issues, please contact Novastar through their official channels:

Novastar is committed to making improvements and/or changes to their documentation at any time and without notice. Please refer to the official website for the most up-to-date information and support resources.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.