1. Introduction
The LEEDOAR Mini600 Trail Camera is a compact and lightweight device designed for capturing high-quality images and videos of wildlife, for outdoor scouting, or for security monitoring. Featuring a highly sensitive Passive Infrared (PIR) sensor, it detects motion and records clear 20MP photos and 1080P videos with sound. Its robust, waterproof design ensures reliable performance in various outdoor conditions.


2. Product Components and Setup
2.1 Package Contents
- 1 x Mini600 Hunting Camera
- 1 x Mounting Strap
- 1 x USB Cable
- 1 x User Manual
2.2 Camera Overview


2.3 Battery Installation
- Open the camera housing latch.
- Locate the 4AA Batteries Depot inside the camera.
- Insert 4 AA batteries (not included) into the battery compartment, ensuring correct polarity.
- Close the camera housing latch securely.
2.4 Micro SD Card Installation
- Open the camera housing latch.
- Locate the Micro SD Card Slot.
- Insert a Micro SD card (up to 32GB, included) into the slot until it clicks into place.
- Close the camera housing latch securely.
2.5 Mounting the Camera
The Mini600 Trail Camera can be fixed using the provided mounting strap or a tripod mount.
- Using the Mounting Strap: Thread the strap through the designated slots on the back of the camera and secure it around a tree or pole.
- Using a Tripod: Attach the camera to a standard tripod using the Stand Knob Port at the bottom of the camera.
3. Operating Instructions
3.1 Powering On/Off
Locate the OFF/ON switch inside the camera housing. Slide the switch to 'ON' to power on the camera and to 'OFF' to power it off.
3.2 Operating Modes
The camera supports the following operating modes:
- Camera: Captures still images.
- Video: Records video clips.
- Camera & Video: Captures a still image followed by a video clip upon detection.
- Timelapse: Captures images at set intervals over a period.
3.3 PIR Motion Detection
The camera's PIR sensor detects motion within a 60-degree range and up to 65 feet (20 meters). The trigger speed is approximately 0.8 seconds. You can adjust the PIR interval (1/5/10/30 seconds/minute, default 1 second) and motion detection sensitivity (Low/Medium/High) in the settings.
3.4 Image and Video Settings
- Image Resolution: Select from 20MP, 16MP, or 12MP.
- Video Resolution: Choose between 1080P, 720P, or VGA.
- Multiple Photo on one detection: Set to capture 1, 3, 6, or 9 photos per trigger.
- File Format: Images are saved as JPEG, videos as AVI.
- Date Time Imprint: Yes (enabled by default).
- Moon Phase Imprint: Yes (enabled by default).
- ISO Exposure: Auto/100/200/400.
- Timer: The camera includes a timer function for scheduled operation.
3.5 Connecting to a Computer
Use the provided USB cable to connect the camera to a computer via the USB Port. This allows you to access and transfer recorded images and videos from the Micro SD card.
4. Maintenance
4.1 Waterproofing
The Mini600 Trail Camera has an IP66 waterproof rating, making it suitable for use in humid and rainy environments. Ensure the camera housing latch is securely closed to maintain its waterproof integrity.

4.2 Temperature Range
The camera operates effectively in temperatures ranging from -20℃ to 70℃ (-4℉ to 158℉).
4.3 Battery Life
With its low power consumption (0.2mA standby current), the camera can last up to 3 months on a single set of 4 AA batteries in standby mode. Replace batteries when the low battery indicator appears.
4.4 General Care
- Keep the lens clean and free from dirt or smudges for optimal image quality.
- Avoid exposing the camera to extreme impacts or drops.
- Ensure the Micro SD card is properly inserted and removed to prevent data corruption.
5. Troubleshooting
5.1 Camera Not Powering On
- Check if the batteries are inserted correctly with the right polarity.
- Ensure the batteries have sufficient charge. Replace with new ones if necessary.
- Verify the OFF/ON switch is in the 'ON' position.
5.2 No Images/Videos Recorded
- Ensure a Micro SD card is properly inserted and has available storage space.
- Check the PIR detection range and sensitivity settings. Adjust if animals are too far or motion is too subtle.
- Verify that the camera is in the correct operating mode (Camera, Video, or Camera & Video).
- Format the Micro SD card if it's a new card or if you experience issues (this will erase all data).
5.3 Poor Image/Video Quality
- Clean the camera lens with a soft, lint-free cloth.
- Check the selected image and video resolution settings; higher resolutions provide better quality.
- Ensure there are no obstructions in front of the lens or PIR sensor.
6. Specifications
| Item | Value |
|---|---|
| Image Sensor | 3 Mega Pixels Color CMOS |
| Memory | Micro SD Card to 32GB |
| Lens | F=3.2; FOV=60 ° |
| Size | 105mm * 75mm * 43 mm |
| Mode | Camera/Video/Camera&Video/Timelapse |
| PIR Detect Range | 60 Degree |
| IR LED | High power LED |
| PIR Distance | 65ft/20 meters |
| Trigger Speed | 0.8 second |
| PIR Interval | 1/5/10/30sec/min (default 1 sec) |
| Image Resolution | 20MP/16MP/12MP |
| Multiple Photo on one detection | 1/3/6/9 |
| Video Resolution | 1080P/720P/VGA |
| File Format | JPEG/AVI. |
| Date Time Imprint | Yes |
| Moon Phase Imprint | Yes |
| ISO Exposure | Auto/100/200/400 |
| Stand-by current | 0.2mA |
| Stand-by time | 3 Months |
| Interface | USB2.0 jack; Micro SD Card jack; 6V 1.5A External plug |
| Fix Method | Belt, Tripod mount |
| Motion Detection | Low/Medium/High |
| Operation Temperature | -20 ~70℃ (-4~158℉) |
| Power | 4 ×AA batteries (not include battery) |
| Timer | Yes |
| Waterproof | IP66 |
7. User Tips
To maximize your experience with the Mini600 Trail Camera, consider the following tips:
- Optimal Placement: Position the camera at a height appropriate for the target subjects (e.g., animal eye level for wildlife, human chest height for security). Ensure a clear line of sight for the PIR sensor.
- Avoid Direct Sunlight: While the camera is durable, direct sunlight can sometimes trigger false detections or overexpose images. Try to place it in a shaded area or facing away from the rising/setting sun.
- Test Before Deployment: After setup, perform a walk-test in front of the camera to ensure the PIR sensor is detecting motion and recording as expected.
- Regular Battery Checks: Although the standby time is long, regularly check battery levels, especially before extended deployments, to avoid missing important events.
- SD Card Management: Periodically review and back up your footage. Format the SD card in the camera itself for best performance.

8. Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact the seller directly through the platform where the purchase was made. Refer to your purchase documentation for specific contact details and warranty terms.