Introduction
Thank you for choosing the PawHut Dog Car Separator. This adjustable pet barrier is designed to provide a safe and secure space for your dog in the trunk of your car, preventing them from distracting the driver and ensuring a comfortable journey for everyone. This manual provides detailed instructions for assembly, installation, adjustment, and maintenance to help you get the most out of your new car separator.
Important Safety Information
- Always ensure the car separator is securely installed and adjusted to fit your vehicle's trunk before driving.
- Do not use the separator if any parts are damaged or missing.
- Regularly check the stability and tightness of all connections, especially after long journeys.
- This product is designed to keep pets contained in the trunk area; it is not a substitute for a proper pet restraint system in case of an accident.
- Ensure there are no sharp or protruding parts that could injure your pet.
Package Contents
Please check the package to ensure all components are present and undamaged:
- 1 x PawHut Dog Car Separator (Pet Safety Grate)
- 1 x Instruction Manual (this document)
Specifications
| Feature | Detail |
|---|---|
| Model | D00-001V02 |
| Color | Black |
| Material | Steel, ABS, PVC |
| Adjustable Height | 60 - 105 cm |
| Adjustable Width | 87 - 135 cm |
| Horizontal Bar Length | 63 cm |
| Gap Between Horizontal Bars | 9 cm |
| Net Weight | Approximately 2.48 kg |
Figure 1: Product Dimensions
Setup and Installation
Follow these steps to properly assemble and install your PawHut Dog Car Separator:
1. Unpack and Identify Components
Carefully remove all parts from the packaging. You should have two vertical poles, several horizontal bars, and various connectors and adjustment knobs.
Figure 2: Product Components
2. Assemble the Horizontal Bars
- Attach the horizontal bars to the vertical poles using the provided connectors. The horizontal bars are designed to slide into the connectors on the vertical poles.
- Ensure the U-shaped ends of the horizontal bars are facing outwards, as shown in Figure 3.
- Tighten the adjustment knobs on the connectors to secure the horizontal bars in place.
Figure 3: Horizontal Bar Connection
Figure 4: Lower Bar Connection Detail
Figure 5: Horizontal Bar Adjustment Mechanism
3. Adjust Width and Height
- Loosen the adjustment knobs on the vertical poles to extend or retract them to the desired height (60-105 cm).
- Loosen the adjustment knobs on the horizontal bars to extend or retract them to the desired width (87-135 cm).
- Ensure the barrier fits snugly within your car's trunk space.
Figure 6: Vertical Pole Adjustment Mechanism
4. Install in Vehicle Trunk
- Place the assembled separator in the trunk of your car, positioning it behind the rear seats.
- Extend the vertical poles until the non-slip PVC suction cups at the top and bottom make firm contact with the roof and floor of the trunk, respectively.
- Tighten all adjustment knobs securely to prevent movement during travel. The non-slip suction cups provide additional stability.
Figure 7: Top Suction Cup Detail
Figure 8: Adjustable Foot with Suction Cup
Figure 9: Installed Car Separator Example
Operating Instructions
The PawHut Dog Car Separator is designed for simple operation once installed.
Adjusting Height and Width
If you need to adjust the height or width after initial installation, simply loosen the corresponding adjustment knobs, reposition the poles/bars as needed, and then re-tighten all knobs firmly. Always ensure the barrier is stable and secure before transporting your pet.
Removing the Separator
To remove the separator, loosen all adjustment knobs, retract the vertical poles and horizontal bars, and then carefully lift the unit out of the trunk. It can be easily disassembled for compact storage when not in use.
Maintenance
- Cleaning: Wipe down the steel and plastic components with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the finish.
- Inspection: Periodically inspect all parts for wear, damage, or loose connections. Ensure the non-slip PVC suction cups are clean and free of debris for optimal grip.
- Storage: When not in use, disassemble the separator and store it in a dry place away from direct sunlight to prolong its lifespan.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Separator feels unstable or wobbly. | Adjustment knobs are not tightened sufficiently, or poles/bars are not fully extended to fit the space. | Ensure all adjustment knobs are firmly tightened. Re-adjust height and width to create a snug fit against the car's interior surfaces. Check that suction cups are clean and making good contact. |
| Separator does not fit my car trunk. | Vehicle dimensions are outside the adjustable range of the separator. | Verify your car's trunk dimensions against the product specifications (Adjustable Height: 60-105 cm, Adjustable Width: 87-135 cm). This product is universal but may not fit all vehicles. |
| Horizontal bars slide down. | Connectors for horizontal bars are not tightened. | Ensure the adjustment knobs on the horizontal bar connectors are securely tightened. |
User Tips
- Check Vehicle Compatibility: Before purchasing or installing, measure your car's trunk height and width to ensure it falls within the adjustable range of the PawHut Dog Car Separator (Height: 60-105 cm, Width: 87-135 cm). This helps confirm it will fit specific models like an Audi A4 Avant B9 2017.
- Optimal Placement: Position the barrier as close to the rear seats as possible to maximize trunk space for your pet while maintaining a secure fit.
- Regular Checks: Especially during initial use, check the barrier's stability frequently to ensure it remains firmly in place.
Warranty and Support
For any questions regarding the assembly, operation, or maintenance of your PawHut Dog Car Separator, please refer to this manual. If you require further assistance, please contact the retailer or manufacturer's customer service department. Keep your purchase receipt for any warranty claims.
