Ubtech Alpha Mini My Ai Robot WUKONG Robot User Manual

1. Introduction

Welcome to the world of Alpha Mini, your first AI companion. The Alpha Mini robot is an advanced humanoid robot designed for interactive experiences, learning, and entertainment. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Alpha Mini robot.

Figure 1: Alpha Mini Robot (Front View)

2. Safety Precautions

WARNING:

• The packaging must be retained as it contains important information.
• The battery charger used with the toy must be regularly examined for damage to the cord, plug, enclosure, and other parts. If damaged, it must not be used until repaired.
• The supply terminals, battery terminals, and connectors are not to be short-circuited.
• Misuse of the transformer can cause electrical shock.
• The toy must only be used with the recommended transformer (rated output DC5V, 3A). The transformer is not a toy.
• Choking hazard - small parts inside. The toy is not intended for children under 3 years old.
• The toy must be disconnected from the transformer before cleaning.
• Transformers and power supplies for toys are not intended to be used as toys, and the use of these products by children shall be under the full supervision of parents.
• Be careful of hazardous function sharp points on the end of the pin.
• The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like. Attention should be drawn to environmental aspects of battery disposal.
• Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery, etc.).
• Do not touch the toy when it is moving to avoid hand injuries.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Leaving a battery in an extremely high-temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• The safe distance for use is 20CM or more.
• Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

3. What's in the Box

Please check the contents of your Alpha Mini package:

• AlphaMini Robot (x1)
• Power adapter (x1) - Design may vary by region (EU/UK/US standard).
• Type-C cable (x1)
• User Manual (x1)
• Warranty Card (x1)
• SIM card eject pin (x1)

Figure 2: Package Contents

4. Robot Structure and Components

Familiarize yourself with the different parts of your Alpha Mini robot:

Figure 3: Front View Components

• Camera: 13M Pixels, f/2.2 Aperture, Autofocus
• LCD eyes: 1.22 inches, 260,000-Color TFT Display, 240*240 resolution
• LED mouth: Indicates robot status
• Infrared sensor: Detects obstacles and distance
• Microphone: 4-mic array for voice interaction and source positioning
• SIM slot: For Nano SIM card (under left armpit)
• Stereo speakers: 2-channel, 0.8W*2

Figure 4: Side/Back View Components

• Sling hole: For carrying accessories
• Handy grip: For safely picking up the robot
• Volume button: Adjusts robot volume
• Power button: For power on/off and battery check
• Type-C interface: For charging

Figure 5: Head Components (Touch Sensor & Microphone Array)

5. Setup Guide

5.1. Download and Install Mobile App

1. Search for the "AlphaMini" app in your device's App Store (iOS) or Google Play (Android).
2. Alternatively, scan the QR code below to download the app.
3. Install the app on your mobile device.

Figure 6: AlphaMini App QR Code

5.2. Turn Your Robot On

1. Place the AlphaMini Robot on a stable surface and bend its knees.
2. Press and hold the power button (located on the back) until the LED light (mouth) turns on.

5.3. Bind Your Robot

1. Open the AlphaMini app and log in to your account.
2. Tap "Start Binding".
3. Follow the in-app instructions to connect your AlphaMini Robot to a Wi-Fi network for the binding process.

5.4. Install a SIM Card (Optional)

AlphaMini Robot supports a Nano SIM card for 4G network access.

1. Turn off your AlphaMini Robot.
2. Locate the SIM card slot under its left armpit.
3. Push a SIM eject tool into the small hole next to the SIM slot with a little force to pull the SIM tray out.
4. Properly place your Nano SIM card on the tray.
5. Slide the tray back into your AlphaMini Robot.

Figure 7: SIM Card Installation

6. Operating Instructions

6.1. Starting Interaction

Wait for about 40 seconds after turning on. When AlphaMini Robot says "I am ready", you can start using him. Begin by asking, "Hey Mini, what can you do?"

6.2. Voice Interaction

After waking up AlphaMini Robot with "Hey Mini", you can interact in various ways:

• Perform Moves: "Dance", "Do a yoga pose", "Practice kungfu".
• Assist You: "How's the weather today?", "Take a picture of me", "What time is it now?".
• Help with Study: "How to say Apple in French?", "What's 35 times 78?".

6.3. Camera Functions

The AlphaMini Robot's camera features intelligent composition, autofocus, and one-tap sharing. Activate it with the voice command: "Hey Mini, take a photo of me."

6.4. Facial Recognition

AlphaMini supports facial memorization and recognition.

• To teach AlphaMini your face: "Hey Mini, my name is [Your Name]".
• To have AlphaMini recognize you: "Hey Mini, do you know me?".

6.5. Object Recognition

AlphaMini can recognize objects like flowers, plants, and fruits. Ask: "Hey Mini, what is this?" while an object is in front of it.

6.6. Privacy Mode

In privacy mode, the robot's microphone and camera are disabled. You can toggle this mode on or off via the app.

6.7. uCode Programming

uCode allows children aged 6-14 to learn elementary AI programming using Scratch-style graphical code. Download uCode from www.ubtechedu.com and install it on your computer.

To connect for programming:

1. Ensure your computer and AlphaMini Robot are on the same LAN.
2. Click "Detect new devices" in the uCode connection interface.
3. Select AlphaMini Robot and enter the last four digits of its serial number (found on the back).
4. Click "Connect" to begin coding.

To disconnect, click "Disconnect" in the uCode connection interface.

6.8. Do's and Don'ts

Do's

Figure 8: Grabbing the robot by its handy grips.

Figure 9: Alpha Mini in charging pose (knees bent).

• Grab your robot properly by its handy grips to pick him up.
• During charging, if the robot is in sleep mode or off, make him pose with bent knees as shown.

Don'ts

Figure 10: Do not touch Alpha Mini when it's moving.

Figure 11: Do not place Alpha Mini at the edge of a table.

Figure 12: Do not twist or pull Alpha Mini's head with force.

Figure 13: Do not put Alpha Mini on an inclined surface.

• Do not touch your AlphaMini Robot when it is moving to avoid hand injuries.
• Do not place your AlphaMini Robot at the edge of a table.
• Do not twist or pull AlphaMini Robot's head with force.
• Do not put your AlphaMini Robot on an inclined surface.
• Do not twist the joints of your AlphaMini Robot with force.
• Do not cast or smash your AlphaMini Robot to prevent damage.

6.9. Buttons and Lights Reference

This table summarizes the functions of buttons and the meaning of the LED light in the robot's mouth.

6.10. Wake Up from Sleep Mode

After a period of inactivity, AlphaMini enters a power-saving (sleep) mode, and its LCD eyes turn off. To wake it up, touch the top of its head or press its power button.

6.11. Turn Off Your Robot

Press and hold the power button for 3 seconds until your AlphaMini Robot turns off, or use the voice command: "Hey Mini, shut down."

7. Maintenance

• Storage: Store the product in a well-ventilated, clean, and dry environment to avoid moisture, dust, and high temperatures.
• Cleaning: Turn off the product before cleaning. Wipe its surface with a small amount of neutral detergent and a damp towel. Dry it naturally before turning it on again.
• Battery Care: When not using the product for extended periods, turn it off and store it in its product storage box. Charge the product at least once a month to avoid shortening battery life. Always use the original power adapter and cable for charging.
• Joints: The movable joints are precision parts. Do not twist, pull, or squeeze them with force to avoid damage.

8. Troubleshooting

• Abnormal Situations: In cases of start-up failure, shutdown failure, no response from the robot, or abnormal actions, please contact aftersales@ubtrobot.com.
• Battery Exhaustion: If the built-in lithium battery fails to reach 80% after repeated charging or exhausts 100% of its power reserve within 15 minutes, contact aftersales@ubtrobot.com for professional help.
• Software Updates: This product only supports official upgrades. Do not upgrade the software/systems in other ways to avoid damage or user information leakage.

9. Specifications

10. Warranty and Support

For product repair or replacement, or in case of any abnormal situations, please contact UBTECH customer support at aftersales@ubtrobot.com.

The product comes with a Warranty Card. Please refer to it for specific warranty terms and conditions.

EU Declaration of Conformity:

UBTECH ROBOTICS CORP LTD declares that the AlphaMini Robot (Model: Alpha Mini, Software: V1.6.0.50) complies with the 2014/53/EU (The Radio Equipment Directive) and relevant standards for safety, EMC, and radio. The conformity assessment procedure was followed with the involvement of Notified Body: TUV SUD TPS (NB No.: 0123), certificate No.: TPS-RED500050 I01.

11. User Tips

• Language Support: The Alpha Mini (Wukong Robot) responds to English commands. Ensure you speak clearly for optimal interaction.