1. Introduction
Thank you for choosing the Homcom Folding Fabric Wardrobe. This manual provides essential information for the safe assembly, proper use, and maintenance of your new wardrobe. Please read these instructions carefully before assembly and retain them for future reference.
This versatile fabric wardrobe is designed to offer additional storage space in various rooms such as bedrooms, pantries, garages, or laundry rooms. It features a sturdy steel frame, a non-woven fabric cover, 6 shelves, and 1 hanging bar to help keep your clothes, towels, bedding, and bags organized and protected from dust.

Figure 1: Assembled Homcom Folding Fabric Wardrobe (Gray)
2. Safety Instructions
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the wardrobe on a soft, clean surface to prevent scratches or damage.
- Keep children and pets away during assembly to avoid injury or choking hazards from small parts.
- Do not overload the shelves or hanging bar. Adhere to the maximum load capacities specified in the 'Specifications' section.
- Place the wardrobe on a flat, stable surface to prevent tipping.
- Keep the fabric cover away from open flames or high heat sources.
- Do not climb on or hang from the wardrobe.
- Regularly check all connections to ensure they remain tight and secure.
3. Package Contents
Before beginning assembly, verify that all components listed below are included in your package:
- Steel tubes (various lengths for frame and shelves)
- Plastic connectors
- Non-woven fabric cover
- Non-woven fabric shelves (6 pieces)
- Hanging bar (1 piece)
- Assembly instructions (this manual)
If any parts are missing or damaged, please contact customer support for assistance.
4. Setup and Assembly
Assembly of the Homcom Folding Fabric Wardrobe is quick and easy. No tools are typically required.
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
- Assemble Base Frame: Connect the shortest steel tubes using plastic connectors to form the base rectangle. Ensure all tubes are fully inserted into the connectors.
- Install Vertical Supports: Attach the longer vertical steel tubes to the base frame's connectors.
- Add Lower Shelves: Slide the non-woven fabric shelves onto the appropriate steel tubes for the lower sections. Ensure the fabric is taut and properly supported.
- Build Upwards: Continue adding vertical tubes and connecting them with plastic connectors, forming the next level of the frame.
- Install Remaining Shelves and Hanging Bar: Place the remaining fabric shelves and the hanging bar into their designated positions. The hanging bar typically spans the wider section of the wardrobe.
- Complete Top Frame: Connect the final set of vertical tubes and then form the top rectangle using the remaining shortest steel tubes and plastic connectors.
- Attach Fabric Cover: Drape the non-woven fabric cover over the assembled frame. Ensure the zippers align correctly with the front opening.
- Secure Cover: Zip up the front cover. Use the hook-and-loop fasteners to secure the rolled-up door flap if desired (see Figure 2).

Figure 2: Zipper and Hook-and-Loop Fastener Detail

Figure 3: Rolled-up Door Secured
5. Operating Instructions
Using your Homcom Folding Fabric Wardrobe is straightforward:
- Accessing Contents: Unzip the front cover to access the interior.
- Securing Open Door: If you wish to keep the wardrobe open, roll up the front flap and secure it with the integrated hook-and-loop fasteners (as shown in Figure 3).
- Storage: Utilize the 6 shelves for folded items such as sweaters, towels, or bags. Use the hanging bar for garments that require hanging, like shirts, jackets, or dresses.
- Protection: Keep the zipper closed when not accessing the wardrobe to protect your items from dust and maintain a tidy appearance.

Figure 4: Wardrobe Interior Layout
6. Maintenance
- Cleaning the Fabric Cover: Wipe the non-woven fabric cover with a damp cloth and mild detergent if necessary. Do not machine wash or tumble dry. Allow to air dry completely.
- Cleaning the Frame: The steel frame can be wiped clean with a damp cloth.
- Regular Checks: Periodically inspect the plastic connectors and steel tubes for any signs of wear or damage. Ensure all connections are secure.
- Storage: If disassembling for storage, ensure all parts are clean and dry. Store in a cool, dry place away from direct sunlight.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wardrobe is wobbly/unstable. | Loose connections; uneven surface; overloaded. | Ensure all steel tubes are fully inserted into plastic connectors. Place on a flat, level surface. Reduce load if overloaded. |
| Fabric cover does not fit properly. | Incorrect assembly of frame; cover misaligned. | Double-check frame dimensions against specifications. Re-align cover, ensuring zippers are at the front. |
| Zipper is stuck or difficult to move. | Fabric caught in zipper; zipper mechanism dirty. | Gently pull fabric away from zipper teeth. Clean zipper with a soft brush. Apply a small amount of zipper lubricant if needed. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Reference | 850-213v00cw / 850-211v00lg |
| Color | Light Grey (also available in Cream) |
| Material | Steel, Non-Woven Fabric (TNT), Polypropylene (PP) |
| Total Measurements (LxWxH) | 103 cm x 43 cm x 162.5 cm |
| Right Shelves (LxWxH) | 39.5 cm x 39.5 cm x 37.5 cm (6 shelves total) |
| Left Hanging Space (LxWxH) | 58.5 cm x 39.5 cm x 115.5 cm |
| Hanging Rod Length | 58 cm |
| Hanging Bar Height (from bottom shelf) | 111 cm |
| Door Measurements (LxW) | 83 cm x 145 cm |
| Leg Height | 5 cm |
| Maximum Load (Total) | 45 kg |
| Maximum Load (Hanging Bar) | 15 kg |
| Maximum Load (Each Shelf) | 5 kg |
| Appearance | Modern Style |
| Way Of Opening And Closing | Zipper |
| Origin | Mainland China |
| Specific Use | Wardrobe |
| General Use | Home Furniture |
| Type | Bedroom Furniture |

Figure 5: Wardrobe Dimensions
9. User Tips
- For optimal stability, distribute weight evenly across shelves and the hanging bar.
- Consider using storage boxes or bins on the shelves to further organize smaller items and maximize space.
- If placing in a high-traffic area, ensure the wardrobe is positioned where it won't be easily bumped or disturbed.
- The raised base helps protect items from moisture on the floor, but avoid placing the wardrobe in excessively damp environments.
10. Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.