Introduction
Thank you for choosing the HOMCOM Floating Bedside Table Set. This set includes two modern and elegant wall-mounted bedside tables, each featuring a drawer and an open shelf. Designed to save space and protect your items from floor moisture, these tables are a practical addition to any bedroom or guest room. This manual provides essential information for safe assembly, operation, and maintenance of your new furniture.

Safety Information
- Always ensure the wall you are mounting the tables to is suitable for supporting the weight of the tables and their contents. Consult a professional if unsure.
- Use appropriate wall anchors and screws for your specific wall type (e.g., drywall, concrete, wood studs).
- Do not overload the tables. Adhere to the maximum weight capacity specified in the 'Specifications' section.
- Keep small parts and packaging materials away from children during assembly to prevent choking hazards.
- Regularly check the mounting hardware for tightness to ensure stability.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 2 x Floating Bedside Tables (disassembled)
- 1 x Hardware Pack (screws, wall anchors, etc.)
- 1 x Assembly Instruction Manual
Assembly and Setup
Assembly is required for these floating bedside tables. Follow these general steps for installation:
- Prepare the Area: Clear the wall space where you intend to mount the tables. Ensure there are no electrical wires or plumbing behind the wall at the drilling locations.
- Assemble the Table Units: Follow the detailed instructions provided in the included assembly manual to construct each bedside table unit. This typically involves attaching the side panels, bottom, top, and drawer slides.
- Mark Mounting Points: Determine the desired height and position for each table. Use a level to ensure the tables will be straight. Mark the drilling points on the wall accurately using the pre-drilled holes on the back of the table as a template.
- Drill Pilot Holes: Using an appropriate drill bit for your wall type, drill pilot holes at the marked locations.
- Insert Wall Anchors: If drilling into drywall or hollow walls, insert the appropriate wall anchors into the pilot holes. For wood studs, anchors may not be necessary, but ensure screws are long enough to penetrate securely.
- Mount the Tables: Align the tables with the wall anchors/pilot holes and secure them firmly with the provided screws. Do not overtighten.
- Install Drawers: Once the tables are securely mounted, slide the assembled drawers into their respective compartments.


Operating Instructions
Your HOMCOM Floating Bedside Tables are designed for convenient storage and display:
- Countertop: Use the top surface to place items you need readily accessible, such as a night lamp, alarm clock, or a glass of water.
- Open Shelf: The open shelf provides an easily accessible space for books, magazines, or decorative items.
- Drawer: The smooth-gliding drawer is ideal for storing personal items, keeping your bedside area tidy and clutter-free.


Maintenance and Care
To ensure the longevity and appearance of your bedside tables, follow these care instructions:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the melamine finish.
- Spills: Clean up spills immediately to prevent staining or damage to the material.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
- Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
Troubleshooting
- Table feels unstable after mounting: Ensure all mounting screws are securely tightened and that appropriate wall anchors were used for your wall type. If instability persists, re-evaluate the mounting points and consider professional installation.
- Drawer is difficult to open/close: Check that the drawer slides are correctly aligned and free from obstructions. Ensure the drawer was assembled correctly according to the instructions.
- Scratches or minor damage: For minor scratches on the melamine finish, touch-up pens or furniture repair kits designed for laminate surfaces may be used.
Specifications
| Feature | Detail |
|---|---|
| Color | Oak |
| Material | Melamine Wood (Chipboard in laminated finish) |
| Total Dimensions (L x W x H) | 35 x 32 x 22.5 cm |
| Countertop Dimensions (L x W) | 35 x 10 cm |
| Inner Drawer Dimensions (L x W x H) | 26.7 x 23.5 x 6 cm |
| Open Shelf Dimensions (L x W x H) | 35 x 30.5 x 9 cm |
| Maximum Weight Supported | 8 kg |
| Reference Number | 831-338V02AK |
User Tips
- Consider the height of your bed when deciding on the mounting position for optimal convenience.
- For a cohesive look, ensure both tables are mounted at the same height and distance from the bed.
- Utilize the open shelf for decorative items or frequently accessed essentials, and the drawer for items you prefer to keep out of sight.

Warranty and Support
For any questions, concerns, or support regarding your HOMCOM Floating Bedside Table Set, please refer to your purchase documentation for seller contact information. Keep your proof of purchase for any warranty claims.