Pilot TV P32HG Smart TV Remote Control User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your new replacement remote control for the Pilot TV P32HG Smart TV. Please read this manual thoroughly before using the remote control to ensure proper functionality and to maximize your viewing experience.

2. Package Contents

1 x Replacement Remote Control for Pilot TV P32HG
(Batteries are typically not included and must be purchased separately)

3. Setup

3.1 Battery Installation

Locate the battery compartment on the back of the remote control.
Slide the battery cover downwards or press the latch and lift to open.
Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
Replace the battery cover by sliding it back into place until it clicks securely.

Back view of the remote control showing the battery compartment — Figure 1: Rear view of the remote control with battery compartment.

3.2 Initial Use and Compatibility

This remote control is designed as a direct replacement for the Pilot TV P32HG Smart TV. No programming is typically required. For optimal compatibility, ensure the appearance and button layout of this replacement remote match your original remote control.

Compatible: If the appearance and button layout of this remote control are identical to your original remote.
Not Compatible: If the appearance and button layout are different from your original remote, it may not function correctly with your TV.

Front view of the remote control with all buttons visible — Figure 2: Front view of the remote control, illustrating button layout.

4. Operating Instructions

Point the remote control directly at the infrared receiver on your Pilot TV P32HG. Ensure there are no obstructions between the remote and the TV.

4.1 Button Functions Overview

Button	Function
Power (Red)	Turns the TV on or off.
Sleep (Green)	Sets the TV to turn off after a specified time.
P.MODE	Cycles through picture modes (e.g., Standard, Dynamic, Movie).
S.MODE	Cycles through sound modes (e.g., Standard, Music, Movie).
0-9 (Number Buttons)	Direct channel selection.
SOURCE	Selects input sources (e.g., HDMI, AV, TV).
HOME	Accesses the Smart TV home screen or main menu.
Navigation (Up/Down/Left/Right)	Navigates through menus and options.
ENTER	Confirms selections.
MENU	Opens the TV's main menu.
EXIT	Exits the current menu or function.
VOL +/-	Adjusts the volume level.
CH +/-	Changes channels.
DISPLAY	Shows current channel information or TV status.
ASPECT	Changes the screen aspect ratio.
Colored Buttons (Red, Green, Yellow, Blue)	Context-sensitive functions within menus or applications.
PC	Switches to PC input.
TV	Switches to TV tuner input.
AV	Switches to AV input.
HDMI	Switches to HDMI input.
AUDIO	Selects audio track or mode.
SUB.T	Activates or deactivates subtitles.
Play/Pause, Stop, Rewind, Fast Forward	Media playback controls (if supported by TV).
AUTO	Automatic function (e.g., auto-tuning).

5. Maintenance

5.1 Cleaning

To clean the remote control, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.

5.2 Battery Care

Replace batteries when the remote control becomes unresponsive or its range decreases.
Do not mix old and new batteries, or different types of batteries (e.g., alkaline and rechargeable).
Remove batteries if the remote control will not be used for an extended period to prevent leakage.
Dispose of used batteries according to local regulations.

6. Troubleshooting

Problem	Possible Cause / Solution
Remote control is not working.	Check if the batteries are inserted correctly with the correct polarity. Replace the batteries with new ones. Ensure there are no obstructions between the remote control and the TV's infrared sensor. Make sure the remote is pointed directly at the TV. Confirm the TV is powered on.
Some buttons are not responding.	Verify that the remote control is fully compatible with your specific Pilot TV P32HG model (refer to Section 3.2). Clean the remote control surface, especially around the unresponsive buttons, to remove any dirt or debris. Try replacing the batteries.
Remote control range is reduced.	Replace the batteries. Ensure no strong light sources (e.g., direct sunlight, bright fluorescent lights) are interfering with the TV's IR sensor.

7. Specifications

Feature	Detail
Model Number	P32HG
Use	TV
Wireless Communication	IR (Infrared)
Frequency	433 MHz
Channel	1
Support APP	No
Certification	CE
Origin	Mainland China
High-concerned chemical	None
Dimensions (L x W x H)	22 cm x 5 cm x 5 cm (approx.)
Weight	0.16 kg (approx.)

8. User Tips

Compatibility Check: Always compare the button layout and overall appearance of this replacement remote with your original Pilot TV P32HG remote to ensure full compatibility before use.
Line of Sight: For best performance, ensure a clear line of sight between the remote control and your TV's infrared receiver.
Battery Type: Use high-quality alkaline batteries for longer life and consistent performance.

9. Warranty and Support

For warranty information, please refer to the terms provided by your retailer or the point of purchase. If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact the seller or manufacturer for further assistance.

P32HG P32HG