Introduction
This manual provides essential information for the safe and effective use of your Phantom 2 Vision 5.8GHz Remote Control Transmitter, Model PVT581. This transmitter is designed for controlling the DJI Phantom 2 V+ Drone. Please read this manual thoroughly before operating the device to ensure proper functionality and to prevent damage.
Product Overview
The PVT581 remote control transmitter features dual joysticks for precise drone control, along with various switches for different functions. A power button and indicator light are located on the front panel for easy operation.



Setup
1. Battery Installation
- Locate the battery compartment on the rear of the transmitter.
- Open the battery compartment cover.
- Insert four (4) AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
2. Initial Power On
Press and hold the power button on the front of the transmitter until the power indicator light illuminates. A green light typically indicates the device is powered on and ready for operation.
Operating Instructions
1. Pairing with Drone
Before first use, ensure the transmitter is properly paired with your DJI Phantom 2 V+ Drone. Refer to your drone's specific manual for detailed pairing procedures, as this process can vary.
2. Basic Controls
- Left Joystick: Typically controls throttle (up/down) and yaw (left/right rotation).
- Right Joystick: Typically controls pitch (forward/backward) and roll (left/right translation).
- Switches (S1, S2): These switches are programmable and control various flight modes or functions on your drone. Consult your drone's manual for specific assignments.
3. Power Off
To power off the transmitter, press and hold the power button until the indicator light turns off.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid using harsh chemicals or solvents.
- Storage: Store the transmitter in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Remove batteries if the transmitter will not be used for an extended period to prevent leakage and damage.
- Inspection: Regularly inspect joysticks and switches for any signs of wear or damage.
Troubleshooting
- Transmitter does not power on: Check if batteries are installed correctly and are not depleted. Replace with fresh batteries if necessary.
- No connection to drone: Ensure both the transmitter and drone are powered on. Verify that the pairing process has been completed successfully. Check for any obstructions or excessive distance between the transmitter and drone.
- Erratic control: Ensure there is no interference in the operating environment. Check for any physical damage to the joysticks or switches.
Specifications

| Feature | Detail |
|---|---|
| Model No. | PVT581 |
| Output Power | 11dBm |
| Operating Frequency | 5.728-5.850GHz |
| Operating Temperature | -5~+75°C |
| Power Supply | 6V (four 5# AA batteries) |
| Working Current | <70mA |
| FCC ID | S53-201309581 |
| Material | Composite Material |
| Brand Name (Transmitter) | RCMOY |
| Recommended Age | 14+ years |
| Batteries Included | No |
User Tips
No specific user tips were available from reviews or Q&A for this product at this time. Always ensure your drone's firmware is up to date for optimal performance and compatibility with the transmitter.
Warranty and Support
For warranty information and technical support, please contact the original seller or the manufacturer (DJI for the drone, RCMOY for the transmitter) directly. Keep your purchase receipt as proof of purchase.