MiLESEEY PF210

Contents

MILESEEY PF210 Golf Laser Rangefinder

User Manual

Product Overview

Thank you for using the Mileseey laser rangefinder. Please read these instructions carefully before operation.

The PF210 boasts a compact size, lightweight design, and easy one-hand operation. Its body is wrapped in non-slip soft rubber for enhanced user comfort. The PF210 utilizes TOF (Time of Flight) technology to provide multi-functional capabilities, including Golf slope adjustment, Golf Scanning, and Speed Measuring.

This device offers high accuracy, quick response, intuitive distance display, and low power consumption, making it an ideal companion for outdoor activities.

Slope Technology provides compensated distance based on the hole's incline/decline. When the slope switch is turned off, the device is legal for tournament play.

  • Slope on/off supported
  • Continuous measurement supported (Flagpole lock)
  • Vibration supported
  • Speed measurement

MILESEEY PF210 Golf Laser Rangefinder with carrying caseMILESEEY PF210 Golf Laser Rangefinder with carrying case, highlighting key features.

Safety Instructions

1. Warning

  • Do not stare into the laser beam.
  • Eyes can be permanently damaged if looking into the sun with the device.
  • Do not aim the device at the sun, as it will cause permanent damage to internal components.
  • Keep the eyepiece away from direct sunlight.
  • Do not store the device outside the temperature range of -20 °C to +60 °C.
  • When using this product, inspect the battery surface for damage. If damaged, replace the battery immediately. Ensure correct battery polarity according to the markings on the product; do not reverse positive and negative poles.

Man using MILESEEY PF210 Golf Laser Rangefinder with 'FLAG LOCK PULSE VIBRATION' textLaser warning symbol indicating Class 1 laser product with 905nm wavelength.

2. Disposal

  • Everyone is responsible for environmental protection.
  • It is prohibited to dispose of used batteries with household waste. Please collect used batteries at designated waste stations.
  • This product must not be recycled with household waste. Dispose of the product appropriately in accordance with national regulations.

3. Scope of Responsibility

Mileseey will not be responsible for any loss resulting from the use of accessories from other manufacturers without approval from Mileseey.

Product Components

Diagram of MILESEEY PF210 Golf Laser Rangefinder components: Eyepiece, Laser Emitter Lens & Laser Receiving Lens, Slope Switch (On/Off), Ergonomic Design.Detailed view of the rangefinder's external components.

  1. Eyepiece knob
  2. Eyepiece
  3. Battery compartment
  4. Power / Measure button
  5. Mode / Unit switch button (M)
  6. Laser Emitter lens
  7. Objective Lens/Laser Receiving lens
  8. Slope Switch Button

Icons on LCD Display

LCD display showing Flag-Lock with Vibration and 1-second fast lockingExample of LCD display showing Flag-Lock with Vibration.

  1. Low Battery Indicator
  2. Golf Flagpole Scanning Icon
  3. Measure reminder (flashing indicates measurement in progress)
  4. Measured Distance, Measuring Unit (from left to right)
  5. Bull's eye
  6. Golf slope adjusted Icon / Golf slope adjusted Distance / Unit (from left to right)
  7. Angle icon / angle reading / unit (from left to right)

Setup

Battery Installation

The device uses one 1xCR2 battery.

  1. Push the button towards the arrow indicator to open the battery compartment.
  2. Install the 1xCR2 battery, observing correct polarity. Incorrect installation may damage the device due to a short circuit.
  3. After installation, press the battery cover to close it.

Diagram showing how to open the battery compartmentStep 1: Opening the battery compartment.

Diagram showing how to insert the batteryStep 2: Inserting the CR2 battery with correct polarity.

Diagram showing how to close the battery compartmentStep 3: Closing the battery compartment.

When the low battery indicator is displayed, replace the battery promptly to avoid increased distance deviation. Remove the battery if the device will not be used for a long time.

Operating Instructions

Eyepiece Adjustment

Adjust the eyepiece knob to focus on the target clearly before measuring.

Power ON/OFF

  1. Press the Power/Measure button to turn the device ON.
  2. The device will automatically switch off after 16 seconds of inactivity.

Unit Change

Press and hold the Mode/Unit switch button (M) for 2 seconds to change the unit between meters (m) and yards (Yd).

General Measurement Notes

  • If the target reflection is weak or beyond the measuring range, the display will show "---".
  • The measurement range is affected by target material, inclined angle of the target surface, and weather visibility. A smooth, bright, large target surface, with the beam perpendicular to it, and cloudy weather without fog, will result in a longer measurement range.

GOLF SLOPE SWITCH OFF MODE

The Slope Shift feature is legal for tournament play when Slope Mode is disabled. Slope Technology provides compensated distance based on the hole's incline/decline. It is legal for tournament play when the slope switch is turned off.

GOLF SLOPE ADJUSTED MODE

Short press the Mode/Unit switch button (M) to enter golf slope adjusted mode. Aim at target B and short press the Power/Measure button. The measured distance between A and B, the slope adjusted distance, and the angle will be displayed on the screen accordingly. Slope adjusted angle/Slope range: -20° < α < 20°.

Diagram illustrating Slope Compensation: Distance measuring mode (No Slope) and Golf slope adjusted mode.Illustration of slope compensation in action.

GOLF SCANNING MODE (Flagpole SCANNING MODE)

Short press the Mode/Unit switch button (M) to activate flagpole scanning mode. Aim at target B, press and hold the Power/Measure button, and slowly scan back and forth on both sides of the measured target. When the device vibrates, the scanning measurement is complete. The distance from A to B, the Slope distance, and the angle "α" will be shown on the screen accordingly.

Speed Measuring Mode

For speed measurement, the angle "α" must be less than 10; the smaller the angle, the higher the accuracy. Short press the Mode/Unit switch button (M) to activate speed measuring mode. Press the Power/Measure button to aim at target B and move slightly. The speed of the movement will be measured accordingly. Speed measurement range: 18~300km/h.

Product demonstration video showing unboxing, features, and use on a golf course.

Maintenance

  1. To protect the lens coating, do not touch the lens with your fingers.
  2. The laser rangefinder is precisely calibrated. Do not disassemble it. If damaged, send it to a professional maintenance service for repair.
  3. If the exposed glass lens is dirty, gently wipe it with a clean cloth. Do not use harsh objects to wipe.
  4. Avoid collision or heavy load during transport or use. Keep it away from baking or corrosion.
  5. Store the product away from moisture. Keep it in a dry, cool, and well-ventilated place to avoid direct sunlight, dust, and sudden temperature changes.
  6. Rain and fog can affect the laser ray-path, which may worsen measurement accuracy and cause errors under very bad weather conditions.

Troubleshooting

  • Device not powering on: Ensure the CR2 battery is correctly installed with the right polarity and is not depleted.
  • Display shows "---": This indicates a weak target reflection or that the target is beyond the measuring range. Try measuring a closer or more reflective target.
  • Inaccurate readings: Check for low battery. Environmental factors like rain, fog, or extreme temperatures can also affect accuracy. Ensure the lens is clean.
  • Device not responding: If the device is inactive for 16 seconds, it will automatically power off. Press the Power/Measure button to turn it back on.

Specifications

FeatureSpecification
ModelPF210
Range600m
Power3V, CR2*1
Measuring unitm / Yd
Accuracy±0.5m
Laser wavelength905 nm
Eye safetyFDA (CFR 21)
Field of View7°
Magnification6X
Objective lens Diameter22mm
Eyepiece Lens Diameter16mm
Exit Pupil Diameter3.7mm
Diopter±5D
Vibration supportedYes
Golf Slope Adjusted ModeYes
Golf Scanning ModeYes
Speed Measuring ModeYes
Golf Slope switch on/offYes
Dimension110*65*38mm
Weight (Without battery)164g

User Tips

  • For best results, ensure the eyepiece is focused before taking measurements.
  • When using Flagpole Scanning Mode, slowly sweep the device across the target area to ensure the flag is locked. The vibration feedback confirms a successful lock.
  • Remember to switch off the slope function for tournament play to comply with regulations.
  • Keep the lens clean with a soft cloth to maintain optimal clarity and measurement accuracy.

Warranty & Support

The MILESEEY PF210 Golf Laser Rangefinder comes with a 30-day return and refund guarantee, a 12-month warranty, and lifetime technical support.

You can register your product by scanning the QR code in the official user manual to extend the warranty to 2 years.

For any concerns or support, please feel free to reach out to us:

We strive to reply to your inquiries within 24 hours.

A detailed user manual is available in PDF format: MILESEEY PF210 User Manual (PDF)


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.