ToupTek ATR585C

Contents

ToupTek ATR585C ATR3CMOS08300KPA Astronomical Freezing Color Camera

User Manual

1. Introduction

The ToupTek ATR585C camera incorporates the advanced SONY IMX585 sensor, renowned for its exceptional imaging capabilities for both planetary and deep-sky objects. Engineered with an integrated heat dissipation structure and an efficient cooling module, it enables the image sensor to function at a temperature 45℃ lower than the ambient environment. With features including zero amp-glow, a minuscule pixel size, and a high dynamic range (HDR) mode, this camera is ideal for entry-level deep space photography, offering outstanding performance.

Important Power Supply Note:

All ToupTek Astro DSO cooled cameras can only be powered by a 12V3A DC power supply. It is recommended to use the power adapter that comes with the camera or a lithium-ion battery with a stable output of 11-14V. Please do not use power supplies with falsely stated specifications or unstable outputs, as this may affect image capture or even damage the camera.

2. Specifications

The ATR585C camera features the SONY IMX585 sensor, a 1/1.2-inch optical format, 8.3-megapixel CMOS image sensor with a pixel size of 2.9um, offering high clarity and low-noise performance. It includes a 512MB (4Gb) ultra-fast DDR3 memory buffer for stable image transmission.

ToupTek ATR585C Key Specifications

Figure 2.1: Key specifications of the ToupTek ATR585C camera, including sensor type, image area, resolution, ADC, QE, full well capacity, DDR3 buffer, USB interface, TEC cooling, FPS, Max SNR, and Read Noise.

Sensor Information

ATR585C 1/1.2 inch optical format sensor

Figure 2.2: Diagram illustrating the 1/1.2-inch optical format of the ATR585C sensor.

Performance Graphs (Temperature: -10°C)

ATR585C LCG Mode Parameters

Figure 2.3: Graphs showing e/ADU, Read Noise, Full Well, and Dynamic Range for ATR585C in LCG Mode (RAW 12-bit).

ATR585C HCG Mode Parameters

Figure 2.4: Graphs showing e/ADU, Read Noise, Full Well, and Dynamic Range for ATR585C in HCG Mode (RAW 12-bit).

ATR585C HDR Mode Parameters

Figure 2.5: Graphs showing e/ADU, Read Noise, Full Well, and Dynamic Range for ATR585C in HDR Mode (RAW 16-bit).

Spectral Response

ATR585C Spectral Response

Figure 2.6: Spectral response curve for the ATR585C, showing relative response across different wavelengths for red, green, and blue channels.

Mechanical Dimensions

ATR585C Mechanical Diagram Top View

Figure 2.7: Top-down mechanical diagram of the ATR585C camera with key dimensions.

ATR585C Mechanical Diagram Side View

Figure 2.8: Side mechanical diagram of the ATR585C camera with key dimensions, including the 17.5mm optical path.

3. Setup

3.1 Package Contents

Before starting, ensure all components are present:

ATR585C Package Contents

Figure 3.1: The ATR585C camera and its included accessories, typically comprising the camera body, power adapter, power cable, USB3.0 cable, and various extenders/adapters.

3.2 Connecting the Camera

Follow these steps to connect your ATR585C camera:

  1. Connect the camera to a computer using the provided USB3.0/USB2.0 cable.
  2. Connect the power adapter (AC 100-240V 50/60Hz input, DC 12V 3A output) to the camera's power port.
  3. Optional: Connect a filter wheel to the USB HUB for accessories.
  4. Optional: Connect a guiding camera to the USB HUB for accessories.
  5. Optional: Connect an ST4 guiding cable from the guiding camera to an auto-guider mount on an equatorial mount.
ATR585C Wiring Diagram

Figure 3.2: Wiring diagram showing connections for the cooled camera, including USB to computer, power adapter, and optional connections for filter wheel, guiding camera, and ST4 guiding cable.

ATR585C Back Panel Ports

Figure 3.3: Detailed view of the camera's back panel, showing USB2.0 HUBX2, USB3.0 Port, Air inlet, DC 12V power port (5.5x2.1mm), and LED indicators.

3.3 Back Focal Length Connection Solutions

The ATR series cameras offer standard back focal length connection solutions. While using ATR series accessories with ToupTek-Astro products, it's recommended to connect by screws. For 3rd-party accessories, connecting them by adapter ring is also possible.

ATR Series Back Focal Length Connection Solutions

Figure 3.4: Diagram illustrating various connection solutions for ATR series cooled cameras, including adapters for different telescope thread interfaces (M42, M48, M54, M68) and filter drawers, achieving a standard back focal length of 55mm.

ATR Adapter Back Focal Distance

Figure 3.5: Diagrams showing different back focal distances (12.5mm and 17.5mm) achievable with various M42x0.75 adapters.

4. Operating the Camera

4.1 Two-Stage TEC Cooling System

The ATR585C features a two-stage Thermoelectric Cooling (TEC) system with a controllable electric fan. This system allows the image sensor to operate at temperatures up to 45 degrees Celsius lower than the ambient temperature, ensuring stable performance even during long exposures (up to 1 hour). The cooling system can maintain temperatures between -5°C to -10°C even in warmer environments.

Thermoelectric Cooling Feature

Figure 4.1: Illustration highlighting the Thermoelectric Cooling (TEC) feature of the camera.

4.2 Zero Amp-Glow

The ATR585C is designed to achieve zero amp-glow during photo shooting. This significantly reduces internal glow generation and effectively suppresses external light interference, leading to sharper, cleaner images in both long and high exposure modes. This feature also enhances the camera's stability and durability.

Zero Amp-Glow Comparison

Figure 4.2: Comparison image showing the difference between 'AMP Glow' and 'Zero AMP Glow' in captured images.

4.3 Anti-Dew Technology

The camera incorporates anti-dew technology to prevent condensation on the sensor window. This is achieved through a heating function that consumes approximately 5 watts. This heating can be turned off via software to save power. The dew heater at the protection window has 4 adjustable levels, allowing users to fine-tune the heating power to suit environmental conditions.

Anti-Condensation Heating Diagram

Figure 4.3: Diagram illustrating the anti-condensation heating process to effectively solve dew problems.

4.4 DDR3 Buffer

The ATR585C camera is equipped with a 512MB (4Gb) ultra-fast DDR3 memory buffer. This buffer ensures stable and efficient image transmission, preventing data loss or bottlenecks during high-speed capture or long exposures.

DDR3 512M Buffer

Figure 4.4: Image depicting the DDR3 512M memory buffer, crucial for stable image data transfer.

5. Maintenance

To ensure the longevity and optimal performance of your ATR585C camera, follow these maintenance guidelines:

  • Cleaning the Sensor Window: Use a specialized optical cleaning kit (blower, brush, lens cleaning solution, and microfiber cloth) to gently remove dust and smudges from the sensor protection window. Avoid touching the sensor directly.
  • Cleaning the Camera Body: Wipe the camera's exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the camera in a dry, dust-free environment, preferably in its original packaging or a padded case, when not in use. Avoid extreme temperatures and humidity.
  • Power Off: Always disconnect the power supply and USB cable when the camera is not in use or during maintenance.

6. Troubleshooting

If you encounter issues with your ATR585C camera, consider the following common solutions:

  • Camera Not Detected: Ensure the USB cable is securely connected to both the camera and your computer. Try a different USB port or cable. Verify that the necessary drivers are installed.
  • No Power/Cooling: Check that the 12V3A DC power adapter is correctly connected and functioning. Ensure the power source provides stable 11-14V.
  • Image Noise/Amp-Glow: Confirm that the cooling system is active and set to an appropriate temperature. Ensure exposure settings are optimized for your environment. The camera is designed for zero amp-glow, so persistent issues may indicate a software or hardware problem.
  • Condensation on Sensor Window: Activate or adjust the anti-dew heating function. Ensure the camera has acclimatized to the ambient temperature before use.
  • Software Issues: Ensure you are using the latest version of the camera control software and drivers. Restart the software and your computer.

If problems persist after attempting these steps, please contact ToupTek customer support for further assistance.

7. User Tips

  • For optimal cooling performance, allow the camera to reach its target temperature before starting your imaging session.
  • Experiment with the 4 adjustable levels of the anti-dew heater to find the most effective setting for your local humidity and temperature conditions.
  • Always use a stable 12V3A power supply to prevent potential damage or unstable operation.
  • When connecting to a computer, prioritize USB 3.0 ports for faster data transfer, especially during high-resolution or high-frame-rate capture.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official ToupTek website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.