WOLTU Bar Table with 3 Shelves Instruction Manual

Introduction

Thank you for choosing the WOLTU Bar Table with 3 Shelves. This versatile and modern piece of furniture is designed to enhance your kitchen, dining room, living room, or pub area. It combines the functionality of a dining table with convenient storage, making it a practical addition to any space. This manual provides essential information for assembly, usage, maintenance, and specifications to ensure you get the most out of your new bar table.

Package Contents

Please check the package carefully to ensure all components are present and undamaged before beginning assembly.

• 1 x WOLTU Bar Table (disassembled components)
• 1 x Instruction Manual
• 1 x Accessory Set (screws, dowels, etc.)

Note: All decorative items shown in product images are not included in the delivery.

Specifications

This diagram illustrates the key measurements of the bar table, including the table top, overall height, base, and internal shelf spacing.

The table is constructed from E1-grade material for durability. Shelves include protective plates to prevent items from falling, and hole stickers are provided for a neat appearance after assembly.

Assembly Instructions

Assembly of the WOLTU Bar Table is straightforward with the provided accessory set and illustrated instructions. Please follow these general steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts listed in the package contents are present.
2. Identify Parts: Refer to the included diagram (if available in the physical manual) to identify each wooden panel and hardware piece.
3. Assemble Base: Begin by attaching the side panels to the base plate using the appropriate screws and dowels. Ensure connections are secure.
4. Install Shelves: Insert the shelves into the designated slots or attach them to the side panels. Note that the bottom compartment has a back plate for added security. The top two compartments are open for front and back access.
5. Attach Table Top: Securely fasten the table top to the assembled frame.
6. Apply Hole Stickers: Once assembly is complete, use the provided hole stickers to cover any visible screw holes for a clean and finished look.
7. Final Check: Ensure all screws are tightened and the table is stable before use.

For detailed, step-by-step visual guidance, please refer to the illustrated instructions included in your product package.

Operating Instructions

The WOLTU Bar Table is designed for versatile use as a dining surface, counter, or storage unit.

• Table Surface: Use the 60x60 cm table top for dining, preparing drinks, or as a display surface.
• Storage Compartments: The three integrated shelves provide ample space for various items.
  • The top two compartments are open, allowing access from both the front and back, ideal for frequently used items like glasses or small decor.
  • The bottom compartment features a protective plate at the back to prevent items from falling out, suitable for bottles or larger items.
• Load Capacity: Do not exceed the maximum load capacity of 100 kg on the table top or shelves to ensure stability and prevent damage.

This image details the functionality of the three storage compartments, highlighting their accessibility and design for secure item placement.

Maintenance

To keep your WOLTU Bar Table in excellent condition, follow these simple maintenance guidelines:

• Cleaning: Wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the wood finish.
• Spills: Clean up spills immediately to prevent staining or water damage, especially since the material is water-resistant but not waterproof.
• Protection: Use coasters under drinks and placemats under hot dishes to protect the table top.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or warping of the wood.
• Stability: Periodically check and tighten all screws to ensure the table remains stable and secure.

Troubleshooting

If you encounter any issues with your bar table, please refer to the following common problems and solutions:

• Table is Wobbly:
  • Ensure all screws are fully tightened.
  • Check that the table is placed on a flat, even surface.
  • Verify that all components are correctly assembled according to the instructions.
• Parts Missing or Damaged:
  • Immediately contact customer support with details of the missing or damaged parts.
• Difficulty Assembling:
  • Review the assembly instructions carefully, paying close attention to diagrams.
  • Ensure you are using the correct hardware for each step.
  • Do not force parts together; if they don't fit, re-check the orientation.

User Tips

While no specific user reviews or Q&A were provided, here are some general tips for maximizing your experience with the WOLTU Bar Table:

• Consider using non-slip pads under the base if placing on smooth flooring to prevent movement.
• Utilize the open shelves for decorative items or frequently accessed essentials to keep your space tidy and stylish.
• Pair with bar stools of appropriate height (typically 70-80 cm seat height for a 112 cm table) for comfortable seating.

Warranty and Support

For any questions, concerns, or to report missing/damaged parts, please contact WOLTU customer support. Keep your purchase receipt and product information handy when contacting support.

WOLTU is committed to providing quality products. Please refer to the specific warranty information provided with your purchase for details on coverage and terms.