1. Introduction
The Optoma OKW-FA is a high-brightness DLP projector designed for educational and business environments. Featuring 5000 ANSI lumens, WXGA resolution, and a powerful 10W speaker, it delivers clear and vibrant presentations. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your projector.
2. Setup
2.1 Package Contents
Ensure all items are present:
- Optoma OKW-FA Projector
- Remote Controller
- Power Cable
- User Manual (this document)
- Inbox Adaptor
2.2 Placement
Position the projector on a stable, flat surface or mount it securely. Consider the desired screen size and the projector's throw distance. The OKW-FA supports projected dimensions from 30 to 300 inches.
2.3 Connections
Connect the power cable to the projector and a suitable power outlet (220V). Use the appropriate input ports for your source devices.
- HDMI: For high-definition digital video and audio.
- VGA: For analog computer video input.
- RCA: For composite video input.
- Audio In (3.5mm): For analog audio input.
- Audio Out (3.5mm): For connecting external speakers or audio systems.
- USB-A Power (5V/1.5A): To power streaming devices or charge mobile devices.
- RS232: For projector control via a computer or control system.
- S/PDIF: For digital audio output.
2.4 Initial Adjustments
After connecting, power on the projector and adjust the focus using the lens ring. Use the keystone correction feature (±40° Vertical) to square the image if the projector is not perfectly perpendicular to the screen.
3. Operating Instructions
3.1 Power On/Off
- Power On: Press the power button on the projector or the remote control.
- Power Off: Press the power button again. The projector will go through a cool-down cycle before fully shutting down.
- Direct Power On: If enabled, the projector will start immediately when power is supplied.
- Quick Resume: Allows the projector to be instantly powered on again if it was accidentally turned off.
- Auto Off: The projector can be set to automatically turn off after a period of inactivity to save energy.
3.2 Input Source Selection
Use the 'Source' button on the remote control or projector control panel to cycle through available input sources (HDMI, VGA, RCA).
3.3 Image and Audio Adjustments
- Zoom: The projector features a 1.1x manual zoom for adjusting image size.
- Keystone Correction: Adjust vertical keystone (±40°) to correct distorted images.
- Screen Ratio: The projector supports a 16:10 screen ratio, ideal for modern laptops and presentations. It also supports 16:9 and 4:3.
- Brightness & Contrast: Adjust these settings via the on-screen menu to suit your viewing environment. The projector offers a 25,000:1 contrast ratio for vivid images.
- Color Correction: The projector features professional Amazing Color calibration for accurate sRGB color and stable color performance across various content and environments.
- Audio: The integrated 10W stereo speaker provides clear sound. External speakers can be connected via the 3.5mm audio out port.
- AV Mute: Temporarily blanks the screen and mutes audio during presentations when you need to divert attention.
3.4 Power Management Modes
The projector offers various power modes to optimize performance and lamp life:
- ECO+ Mode: Extends lamp life up to 15,000 hours and reduces power consumption by up to 70%.
- Dynamic Mode: Offers up to 12,000 hours of lamp life.
- ECO Mode: Provides up to 10,000 hours of lamp life.
- Brightness Mode: Standard mode with up to 6,000 hours of lamp life.
3.5 USB Power Support
The built-in USB power output (5V/1.5A) can supply power to streaming dongles like Chromecast or HDCast Pro, or charge mobile devices.
4. Maintenance
4.1 Lamp Replacement
The projector uses a Metal Halide Lamp. The lamp life varies depending on the operating mode (up to 15,000 hours in ECO+ mode). Refer to the projector's on-screen menu for lamp hour tracking. When the lamp reaches its end of life, a warning message will appear, and the lamp will need to be replaced by a qualified service technician.
4.2 Cleaning
- Lens: Use a soft, lint-free cloth specifically designed for optical lenses. Do not use abrasive cleaners.
- Casing: Wipe the projector casing with a soft, damp cloth. Avoid using harsh chemicals or solvents.
- Air Vents: Periodically check and clean the air vents to ensure proper airflow and prevent overheating.
5. Troubleshooting
If you encounter issues with your projector, refer to the following common problems and solutions:
- No Image:
- Ensure the projector is powered on and the lamp is lit.
- Check that the video cable (HDMI, VGA, RCA) is securely connected to both the projector and the source device.
- Verify the correct input source is selected on the projector.
- Ensure the source device is powered on and outputting a signal.
- No Sound:
- Check the audio cable connection if using an external audio source.
- Ensure the projector's volume is not muted or set too low.
- Verify the audio output settings on your source device.
- Remote Control Not Working:
- Check and replace the batteries in the remote control.
- Ensure there are no obstructions between the remote and the projector's IR receiver.
- Point the remote directly at the projector.
- Overheating Warning:
- Ensure the projector's air vents are not blocked.
- Operate the projector in a well-ventilated area.
- Clean any dust accumulation from the vents.
6. Specifications
| Feature | Specification |
|---|---|
| Model | OKW-FA |
| Display Technology | DLP |
| Brightness | 5000 ANSI Lumens |
| Resolution | WXGA (1280x800dpi) |
| Contrast Ratio | 25,000:1 |
| Lamp Life (Max) | 15,000 hours (ECO+ Mode) |
| Projected Dimension | 30-300 inches |
| Throw Ratio | 1.55 - 1.73 |
| Keystone Correction | ±40° Vertical |
| Screen Scale | 16:10 |
| Zoom | x 1.1 (Manual) |
| Built-in Speaker | 10W Stereo |
| Noise Level | 28dB (Eco Mode) |
| System | Android |
| Input Ports | HDMI x1, VGA x1, RCA x1, Audio (3.5mm) x1, RS232 x1 |
| Output Ports | USB-A Power (5V/1.5A) x1, Audio (3.5mm) x1, S/PDIF x1 |
| Dimensions (W x D x H) | 274 x 216 x 114 mm |
| Weight | 3.2 kg |
| Power Consumption | 225W |
| Voltage | 220V |
| Light Source | Metal Halid Lamp |
| Remote Controller | Included |
| Bluetooth-compatible | Yes |
| Portable | Yes |
| Use | Business & Education |
7. Warranty and Support
For technical support, service, or warranty inquiries, please contact the official Optoma service center.
- Official Service Center Contact: 1577-8303
8. User Tips
- Maximize Lamp Life: Utilize the ECO+ mode to significantly extend the lamp's lifespan up to 15,000 hours, reducing replacement frequency and energy consumption.
- Integrated Audio: Leverage the powerful 10W built-in speaker for presentations, eliminating the need for external audio equipment in many scenarios.
- Optimal Aspect Ratio: For business and educational content, use the 16:10 aspect ratio for better compatibility with modern laptops and wider viewing areas.
- Convenient Charging: Use the USB-A power output (5V/1.5A) to power streaming dongles or conveniently charge your mobile devices during use.
- Quiet Operation: For environments requiring minimal distraction, the projector's 28dB noise level in Eco mode ensures a quiet presentation experience.