Important Safety Information
- For your safety, do not watch video or operate the machine while driving. Adjust volume to an optimum level.
- Read and understand all safety instructions before operating. Keep this manual for future reference.
- Ensure safety on the road first. If difficulty operating, stop the car safely.
- Keep the machine out of reach from children.
- Adhere to traffic rules when using GPS navigation.
- Do not operate the machine in restricted areas (e.g., petrol stations, strong electromagnetic obstruction areas).
- Do not install, maintain, or repair the machine on your own with the power on. Professional installation is recommended.
- Do not install or store the machine under direct sunlight or near hazardous substances. Ensure no direct contact with the air-conditioner's ventilation duct.
- Do not use sharp objects to scratch or press the display screen vigorously.
- Do not expose the machine to humid weather or direct contact with liquid.
- The machine supports one 12mm CD at a time. Do not insert 8mm CDs or other objects.
1. Setup and Installation
1.1 Pre-Installation Notes
During installation, if you find that some of your car's connectors are not compatible with the Android device accessories, please ignore them. This is because certain original car functions (such as the built-in microphone and GPS module) are already integrated into our Android device, so the corresponding original connectors do not need to be connected.
If a specific accessory is not included in your package, it means your car model does not require it. Please ignore the corresponding connector on the device and proceed with the remaining installation steps.
If the radio is working properly, please do not attempt to restore factory settings or update the firmware. This may cause some software to be lost or preset information to become invalid, which may result in the radio malfunctioning.
1.2 Package Contents
The package typically includes the following accessories:
- Main Unit (Machine)
- Vehicle-specific Frame (e.g., Peugeot 107 Frame)
- Power Cable / Video Input Cable
- GPS Module
- USB Cable
- 4G Module (if applicable)
- 4G SIM Cable (if applicable)
- Instruction Manual (this document)
Note for Toyota Aygo 2005-2014: Some cars have two power cables with different interfaces. If your car's power cable interface matches the image below, you may need a specific cable. Please verify before installation.
1.3 Host Interface Definition and Wiring
Refer to the diagram below for the host interface definition and wiring connections.
RCA Cable Definition:
The RCA connection cable is included according to the package you selected. If your package does not include the RCA cable, please contact customer service.
1.4 Installation Method (X7 MAX / X7 PRO)
The unit is designed for easy installation with four fixing holes. The frame comes with three groups of holes for flexible mounting.
1.5 GPS Antenna Installation Guide
It is recommended to install the GPS antenna on the dashboard or rear shelf. The antenna should be placed on a leveled surface facing the sky to minimize blockage of radio waves. Vehicles with tempered glass or tint may weaken the receiving signal; thus, installing the antenna outside the vehicle is recommended.
- Before affixing the GPS antenna, clean the designated surface.
- Tear off the back of the tape and press to place the GPS antenna firmly.
- Remove the side cover of the car, move the cable through the storage box until it reaches the control panel of the machine. Fix the cable with a cable tie.
- Connect the GPS antenna's plug to the machine.
Notes:
- Ensure the system power is off when connecting to the GPS antenna.
- Do not shorten or extend the GPS cable. Altering the length may result in short circuit or malfunction.
- The antenna should be installed on a leveled surface where radio waves are minimally blocked.
- Do not interfere with the GPS antenna with the steering wheel or gear lever.
2. Operation
2.1 Basic Operation Settings
Power On / Off the machine
- When ACC is connected, press the power button on the front panel to switch on the machine.
- To switch off, turn off the engine and unplug the car key.
Volume Adjustment
Press the "VOL+" or "VOL-" button on the front panel (some models have volume control buttons) to adjust the volume.
Mute Control
Press the left volume button to display the volume bar. Press the media volume to MUTE.
Backlight Control
Adjust the backlight in the Display Setting under Car Settings.
Camera (Rear View)
The screen will automatically switch to rear view when the car is in reverse gear.
Playback Mode and Position Memory
When you reboot the machine, the system will resume to the earlier mode prior to shutdown. For radio, it will resume the last radio channel. For music or video, it will resume playing the last song or video.
2.2 System Settings
Touch the "Settings" icon on the front panel to enter the Settings interface. Move the options bar up and down to find the desired settings.
Network & Internet (Wi-Fi)
Go to Settings > Wi-Fi to ensure Wi-Fi is switched on. Search for your desired Wi-Fi hotspot, enter the password, and touch Connect.
Car Infotainment General Settings
- Sleep Mode: Configure sleep mode ON/OFF in General Settings.
- Touch Assist: Enable or disable touch assist. It provides 7 commonly used options on top of the screen.
- Reverse Volume Control: Adjust the volume while in reverse. Options include None, Weak, Medium, and Strong. Selecting 'None' means no change, 'Strong' lowers the volume the most.
- Restore Factory Setting: In Settings, select "Restore Factory Setting" and confirm. This will reset all settings and remove custom data.
- Display Setting: Adjust the display brightness for daytime and nighttime.
- Volume Option: Adjust volume options for respective systems (e.g., navigation, media) as desired.
2.3 Sound Effect (DSP Tuning System)
Enter the sound effect interface by touching "Sound Effect" to access different sound effect modes. The AKM7604 DSP chip and TDA7388 amplifier provide superb sound quality with built-in 48 EQ settings.
Balance Setting
Touch the four arrows to adjust the 4 speakers' volume. The black dot at the center indicates consistent speaker volume. Touch the restore icon to reset to default balance settings.
Loudness Setting
Slide left or right to adjust loudness. Higher loudness increases the low-frequency value. Adjust reasonably to avoid frequency signal loss.
2.4 Video Options
Video in Motion
Slide the button to enable or disable the video in motion option. If disabled, video and pictures cannot be viewed while the car is in motion.
2.5 Navigation Settings
The GPS provides precise positioning and fast calculation. Navigation maps offer extensive information and route planning.
Navigation Map Data
Copy navigation map data to the internal SD card. Ensure sufficient storage. Unnecessary data can be deleted via ES File Explorer.
Navigation Activation
After installing an APK Navigation Application, an icon will appear on the homepage. Touch it to launch. You can also link the navigation button to the application via "Car Setting" > "Navigation Setting" > "Navigation Application Option".
Reversal Warning Line
Enable this option for safety. It displays the distance to the warning line during reverse, especially useful if your car's camera lacks this feature.
2.6 Steering Wheel Control
Change tracks, volume, and other functions directly from your steering wheel for convenience and safety.
To set up steering wheel controls:
- Go to Settings > Car Settings > Steering Wheel.
- Click "Clear All" first.
- Then click the icons on the screen. When an icon flashes, long press the corresponding button on your steering wheel to match it.
- After successful learning, the icon will change color.
Note: If your order includes a Canbus, ensure you set up the Canbus type for the buttons to work. Contact customer service for assistance.
2.7 Radio
Touch the radio icon on the main interface or application page to enter radio mode.
Radio Channel Search
Use the arrow icons to search for band channels. When a channel is found, the search will stop automatically, and the radio will start playing.
Media Volume
Slide left or right to adjust the media volume. Touch the media volume icon to mute.
Band Search
Select bands: FM1, FM2, FM3, AM1, AM2.
Automatic Channel Search
Touch the search icon to automatically search from low to high frequency for the strongest signal. Touch the icon again to stop.
Preset Radio Channel
Each band can store up to 6 radio channels (total 24: 18 FM, 6 AM). Long press a preset radio channel button (1-6) for about 2 seconds to save the current channel.
2.8 Video Player
Touch the music video icon on the main interface. It supports flash internal storage, USB drive, and various formats like MP3, MP4, WMA, JPEG.
Video Player Interface
Controls include screen playback ratio, loop playback, play/pause, and file list.
2.9 Music Player
Cover Display
The machine supports MP3 cover display if the song includes cover data.
Repeat and Shuffle
Touch the repeat icon to switch between repeat current song or repeat all songs. Touch the shuffle icon to enable/disable shuffling.
Controls
Controls include previous/next track, play/pause, volume, collection, sound, and audio display.
2.10 Bluetooth
Bluetooth's hands-free function allows safe calling while driving. Touch the Bluetooth icon on the front panel to enter Bluetooth settings.
Pairing with Mobile Phones
- Activate the Bluetooth hands-free function on the unit.
- Turn on Bluetooth and device search on your mobile phone.
- Search for the machine's name (e.g., BT5454).
- Enter the PIN (usually 0000) on your mobile phone.
- Once connected, a "CONNECTED" sign will appear.
If already paired, touch the connect icon to connect directly, or the disconnect icon to disconnect.
Making Phone Calls
After establishing a Bluetooth connection, you can dial directly or use the dial pad. Use the delete icon to correct numbers. Press the call icon to call, and the hang-up icon to end. During a conversation, touch the speaker icon to switch between private mode and loudspeaker.
Syncing Contacts
The machine supports syncing contacts from your mobile phone. Once downloaded, contact names will appear during calls. Contact book supports name search by first alphabet.
Call History
Call history shows outgoing, incoming, and missed calls. You can perform calls or delete entries from the history.
Bluetooth Music
The machine supports Bluetooth music playback. Play music on your mobile phone and transfer it to the unit's speakers via Bluetooth. Supports simplified controls like Previous, Next, Pause, and Play.
Note: Due to Bluetooth compatibility, the machine may not support all phone models. Contact customer service if you encounter connection problems.
2.11 CarPlay & Android Auto
Enjoy seamless integration of your smartphone for navigation, entertainment, and a tailored driving experience.
Wired Connection
Use the original data cable to connect your phone to the 4PIN USB cable. Then, turn on the CarPlay/Android Auto function on your phone and connect via the Tlink5 icon on the device.
Wireless Connection
- For the first connection, turn on your phone's Bluetooth and pair it with the car's Bluetooth.
- After successful pairing, the car radio will automatically jump to the Tlink5 interface.
- Your phone will prompt a message to "use carplay with Tlink5".
- Then, turn on your mobile phone's Wi-Fi. CarPlay will connect. For subsequent connections, only Wi-Fi needs to be turned on.
2.12 AVIN Input Support
This machine supports AV (Line Audio / CVBS Audio) input. Connect external AV systems to the machine via an AV cable. Touch the AVIN icon on the main interface to switch to AV input mode.
2.13 Day and Night Mode
The radio will switch between day and night modes with car headlights to make the overall brightness of the screen closer to the environment.
3. Maintenance
3.1 Display Screen Instructions
The LCD screen is a full frontal display for a better viewing experience. Do not press the LCD screen vigorously to prevent damage. Gently touch the LCD screen to prevent scratches or dust.
- Small black or bright dots may appear on the LCD screen; this is a normal specification of LCDs, not a defect.
- In cold areas, the LCD screen may be dimmer after power on but will adjust to normal brightness shortly.
- If exposed directly to sunlight, the screen may be difficult to see due to reflection.
Maintaining the LCD screen
- Turn off the power before cleaning the LCD screen.
- Wipe the screen with a soft fabric to prevent scratches.
- Do not use wet towels, benzene, or chemical cleaners.
Operating Temperature Ranges
- Operating temperature range: -10°C to +50°C
- Storage temperature range: -20°C to +80°C
4. Troubleshooting
If you encounter problems, refer to this guide. If issues persist, contact customer service. Do not dismantle the machine without proper advice.
4.1 Common FAQs
Q: Poor Radio Signal?
A: 1. Check if the radio antenna is connected. If no adapter was included, your vehicle's original antenna might plug directly into the device. 2. Go to Car Settings > Factory > 123456 > Select Audio Region (choose your location). 3. Radio signals can be weak in underground parking or remote areas. Try scanning for stations again in the city.
Q: Hands-free call volume is low?
A: 1. Check if the short blue Bluetooth signal receiver cable is inserted into the 10-pin socket on the back of the device. If not connected, Bluetooth signal and volume will be low. 2. Go to Car Settings > Factory > 123456 > Channel balance > Increase Bluetooth call. 3. If the issue persists, connect an external microphone (3.5mm interface).
Q: Device does not power on?
A: 1. If your wiring kit has multiple power cables, choose the one matching your car's original plug. 2. If accessories include a Canbus, connect it to the power cable. Both the Canbus box and the 8-pin plug need to be connected to the device. 3. If it still doesn't power on, try combining the ACC (red) and B+ (yellow) wires on the power plug (engine off, scrape insulation, connect metal parts). If it powers on, it's a wiring issue; contact customer service.
Q: Original vehicle features (e.g., steering wheel controls) not working (with Canbus box)?
A: 1. Ensure both the Canbus box and the 8-pin plug on the power cable are connected to the device. 2. Check your order's chat history for the Canbus setup guide. 3. Ensure you are connected to the network before selecting a protocol, as CAN protocol information requires a network connection.
Q: CANBUS white plug warning
WARNING: Do NOT insert the white plug of the CANBUS into the 20-pin RCA socket. Incorrect connection will immediately damage the device upon powering on.
Q: How to connect the Junsun rear view camera?
A: 1. Black cable (2) connects to the backup light "+". 2. Red cable (1) connects to the backup light "-". 3. The reversing detection cable (brown color) connects to the red cable (3) extending from the video input cable. (5) cable does not need to be connected.
Q: How to connect with Junsun radio after confirming original rear camera support?
A: If you have the yellow connector in figure 1 inside your cable package, please connect it according to figure 2.
Q: Left side button touch unresponsive?
A: Refer to the learning video (QR code available in the original manual).
Q: Buttons on the left side of the screen don't light up?
A: 1. Check if the car headlights are on (left side button light comes on with headlights). 2. Check if the ILL small light wire is loose. 3. Connect the ILL light cable to the ACC cable to test. If your machine model is DW and the "Color" APK file is missing, contact Junsun customer service to reinstall it.
Q: No Canbus steering wheel buttons do not work?
A: You need to learn the steering wheel buttons. Refer to the steering wheel control setup instructions in section 2.6.
Q: How to use wireless CarPlay/Android Auto function?
A: Check the connection steps in section 2.11.
Q: The original car has an amplifier, but there is no sound after connecting the Junsun radio?
A: 1. If no RCA cable, connect the ACC of the main cable with AMP. 2. If with RCA cable, connect the AMP of the RCA cable with the main cable.
Q: Is it possible to change the language?
A: Junsun radio supports most languages. Go to Settings > Personal > Language Choice. Long press the desired language to move it to the top.
Q: How to turn the air conditioner display on or off?
A: Settings > Car Settings > Original > 123456 > Air conditioning display (Close).
Q: How to turn the camera display function on or off the radio when the vehicle is in reverse gear?
A: Settings > Car Settings > Factory > Reverse mode (System reversing/Prohibit reversing).
4.2 General Troubleshooting Guide
| Issue | Cause | Action (Reference) |
|---|---|---|
| Unable to power on | Car key not inserted or ACC not turned on | Insert car key and turn on ACC |
| Power cord not connected | Connect power cord correctly | |
| Fuse is damaged | Replace with similar fuse | |
| Unresponsive touch screen | System multitasking (e.g., navigation) | Wait a moment. If persists, contact customer service. |
| No rear view image | No reverse camera installed | Install reverse camera and plug into CCD socket. |
| Reverse camera type does not match | Replace the reverse camera. | |
| Rear view appears during reverse position even when system is not booted. Power button is null. | Safety feature: rear view function preset for safety priority. | Power on to boot the system after resuming from reverse position to normal. |
| No GPS signal | GPS antenna not connected | Connect GPS antenna correctly |
| Car may be at GPS signal blind spot. | If problem persists, contact customer service for assistance. | |
| Positioning and navigation failed upon power on | Blind spot of navigation map. Some remote areas or routes not covered. | Contact customer service to update the map. |
| Unable to locate destination routes | Incorrect spelling or possible names. Destination not updated in database. | Ensure correct spelling. Try possible names. If still unable, destination may not be updated. |
| Navigation routes are far | System sets route based on built-in rules, considering road grade, traffic rules, etc. | This is normal behavior. |
| Blank on the map | Due to scale setting or loss of GPS signal. | Zoom in/out. If persists, reset destination or select new landmark. |
5. Specifications
5.1 General Product Properties
| Property | Value |
|---|---|
| Warranty | 2 years |
| Preset Station | Set by yourself |
| Built-in DVD Player | No |
| Built-in CD player | No |
| Chipset | AMP IC 7388 |
| Processor Speed | 1.6Ghz |
| Processor Type | Octa-core A55 |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Category | Combination product |
| TF/Micro SD Slot | 2 |
| Din | One Din |
| RAM | 2 G (varies by model) |
| Interface | USB, RCA |
| Operating System | Android 12 |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2.5 kg |
| Item Size | 13.1/11.5/10.33 inch |
| Max External Memory | 128G |
| Special Features | Built-In Speaker/Microphone, WiFi function, Support steering wheel control, Support 3G/4G Network, Support Can-Bus, Built-in GPS, Charger, Mobile Phone, MP3 players, Voice Control, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Remote Controller Included |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Arabic, Irish, Estonian, Belarusian, Bulgarian, Polish, Danish, German, Russian, French, Finnish, Korean, Dutch, Czech, Croatian, Latvian, Lithuanian, Romanian, Norwegian, Portuguese, Japanese, Swedish, Slovak, Slovenian, Thai, Turkish, Ukrainian, Hebrew, Greek, Spanish, Hungarian, Italian, English |
| Resolution | 1920*1200 (for 13.1" model) |
| Display Size | 11" (varies by model) |
| Brand Name | Junsun |
| For Vehicle Brands/Model | PEUGEOT (compatible with Peugeot 107, Toyota Aygo, Citroen C1) |
| ROM | 32G (varies by model) |
| Accessory Type | Power Cable/USB cable/GPS model/Video input cable |
| Certification | CE, KC |
| Origin | Mainland China |
| Material | Composite Material |
5.2 Model Comparison
| Feature | X7 MAX | X7 PRO | X7 (4G) | X7 (WIFI) |
|---|---|---|---|---|
| Screen Size | 13.1" | 11.5" | 10.33" | 10.33" |
| Screen Resolution | QLED 1920x1200P | QLED 2000x1200P | QLED 720x1600P | QLED 720x1600P |
| CPU / CORE | Octa-core A55 Processor 1.6GHz | Octa-core A55 Processor 1.6GHz | Octa-core A55 Processor 1.6GHz | Quad-core A7 Processor 1.3GHz |
| AMP IC | 7388 | 7388 | 7388 | 7388 |
| Radio Chip | 2G+32GB (4755), 4G+64GB (4755), 6+128GB (7708) | 2G+32GB (4755), 4G+64GB (4755), 6+128GB (7708) | 2G+32GB (4755), 4G+64GB (4755), 6+128GB (7708) | 2G+32GB (4745) |
| CarPlay Android Auto | Yes | Yes | Yes | Yes |
| GPS Track | Support | Support | Support | Support |
| Online Radio | Support | Support | Support | Support |
| AI Voice | Support | Support | Support | Support |
5.3 Product Dimensions
6. User Tips
- Optimize Performance: Regularly clear unnecessary apps and data to maintain smooth operation, especially if you install many navigation maps or media files.
- Stay Updated: Utilize the OTA (Over-The-Air) update feature to ensure your system has the latest firmware, software, and navigation maps for optimal performance and new features.
- Voice Control Efficiency: Familiarize yourself with the AI Voice commands to control the radio hands-free, enhancing driving safety and convenience.
- Personalize Your Experience: Take advantage of the Personalized UI Design to arrange common functions on your desktop for quick access.
- Sound Customization: Experiment with the DSP Tuning System's 48 EQ settings to tailor the audio output to your preference.
7. Warranty and Support
7.1 Warranty
This product comes with a 2-year warranty from the date of receipt confirmation. If the product has a problem within this period, please contact customer service for assistance. We will replace the new machine directly for you if necessary.
7.2 Contact Information
For any issues, questions, or support, please contact Junsun customer service:
- Email: Junsun888@163.com
- Web: https://junsun-china.com/
You can also refer to the official user manual PDF for more detailed instructions and diagrams:
7.3 Junsun Global Service