1. Introduction
Thank you for choosing the A6S True Wireless Bluetooth Headset. This manual provides essential information on how to set up, operate, maintain, and troubleshoot your new earbuds to ensure an optimal audio experience.
2. Setup
2.1 Initial Preparation
Before first use, please ensure you remove the protective insulation film from the charging contacts of both earbuds. This film prevents charging and proper connection.
2.2 Pairing Instructions
- Take out both the left (L) and right (R) earphones from the charging compartment.
- The earbuds will automatically turn on and connect to each other. The main earbud will enter pairing mode, indicated by alternating red and green flashing lights.
- On your mobile phone, open the Bluetooth settings.
- Search for available devices and select "TWS" or the device name (e.g., "OMSE-30697E") to connect.
- Once connected, the indicator lights on the earbuds will stop flashing.
3. Operating Instructions
3.1 One-Key Operation
The A6S earbuds feature a multifunction button on each earbud for easy control:
- Play/Pause: Press the left or right multifunction button once.
- Answer/Hang Up Call: Press the left or right multifunction button once.
- Switch to Previous Track: Long press the left multifunction key for 2 seconds.
- Switch to Next Track: Long press the right multifunction key for 2 seconds.
3.2 Charging
Place the earbuds back into their charging case. The indicator lights on the earbuds will show their charging status. The charging case itself can be charged via a USB cable (not explicitly detailed, but standard for such devices).
4. Maintenance
- Keep the earbuds and charging case clean and dry.
- Avoid exposing the device to extreme temperatures, humidity, or corrosive materials.
- Use a soft, dry cloth to clean the earbuds and charging contacts.
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
5. Troubleshooting
- Earbuds not pairing: Ensure the insulation film has been removed from both earbuds. Place them back in the case, then take them out again to re-initiate pairing mode. Check your phone's Bluetooth settings to ensure it's enabled and searching for devices.
- One earbud not working: Try resetting the earbuds by placing them back in the case and then taking them out. Ensure both earbuds are charged.
- Quick discharge: If the earbuds discharge very quickly, ensure they are properly seated in the charging case and that the case itself is charged. Over time, battery performance may degrade.
- No sound: Check the volume on your connected device. Ensure the earbuds are properly paired and connected.
6. Specifications
| Feature | Specification |
|---|---|
| Material | Plastic |
| Category | Earphones & Headphones |
| Active Noise-Cancellation | No |
| Volume Control | Yes |
| Control Button | Yes |
| Vocalism Principle | Balanced Armature |
| Wireless Type | Bluetooth |
| Communication | Wireless |
| Origin | Mainland China |
7. User Tips
- For optimal comfort and sound quality, ensure the earbuds are properly seated in your ears.
- Regularly clean the charging contacts on both the earbuds and the case to ensure consistent charging.
- If experiencing connectivity issues, try forgetting the device in your phone's Bluetooth settings and re-pairing.
8. Warranty and Support
For any issues not covered in this manual, please contact the seller or refer to the product's official support channels. Keep your purchase receipt for warranty claims.