RACBOX 8993023K

Contents

RACBOX Anti-Glare Car Interior Rearview Mirror Kit

Model: 8993023K

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your RACBOX Anti-Glare Car Interior Rearview Mirror Kit. Designed for a direct replacement fit, this mirror enhances driving safety by reducing glare and providing a high-definition, broad outlook. Please read this manual thoroughly before installation and use.

RACBOX Anti-Glare Rearview Mirror with High Definition Surface and Broad Outlook
The RACBOX Anti-Glare Rearview Mirror offers a high-definition surface and broad outlook for improved visibility.

2. Specifications

FeatureDetail
Model NameCar Interior Rear View Mirror Kit
Part Number (OEM NO.)8993023K
Special FeaturesAnti Glare, High Definition Mirror Surface, Broaden Outlook, Prevents Fogging
MaterialPlastic, Glass
ColorBlack
Fitment TypeDirect Replacement
Dimensions (Approx.)Length: 260mm (10.2"), Height: 119mm (4.7"), Mirror Height: 57.7mm (2.27")

Compatible Vehicles:

  • For Jeep Wrangler TJ (1997-2006)
  • For Jeep Wrangler YJ (1987-1995)
  • For Jeep Cherokee XJ (1984-1991)
  • For Vintage Jeep CJ-5 (1955-1983)
  • For Vintage Jeep CJ-6 (1955-1975)
  • For Vintage Jeep CJ-7 (1976-1986)
  • For Vintage Jeep CJ-8 (1981-1986)
  • For Vintage Jeep SJ & J-Series (1975-1991)
Dimensional drawing of the RACBOX rearview mirror
Detailed dimensions of the rearview mirror for fitment verification.

3. Package Contents

  • 1 x RACBOX Anti-Glare Car Interior Rearview Mirror with Button

4. Installation Guide

The RACBOX Anti-Glare Rearview Mirror is designed for direct replacement and easy installation using the original mounting hole. No complex assembly is required.

Steps:

  1. Preparation: Ensure your vehicle is parked safely with the engine off. Gather any necessary basic tools, though often none are required for direct replacement.
  2. Remove Old Mirror: Carefully detach your existing rearview mirror from its mounting bracket on the windshield. This usually involves a twist or release mechanism. Refer to your vehicle's specific manual if unsure.
  3. Align New Mirror: Position the new RACBOX rearview mirror's mounting bracket over the original mounting point on your windshield.
  4. Secure New Mirror: Slide or twist the new mirror onto the mounting point until it clicks securely into place. Ensure it is firmly attached and does not wobble.
  5. Adjust Angle: Once installed, adjust the mirror to your preferred viewing angle for optimal rear visibility.
Diagram showing original hole installation for the rearview mirror
The mirror is designed for original hole installation, ensuring a direct and secure fit.

Note: This product is a direct replacement. If your vehicle's mounting point differs significantly, professional installation may be required.

5. Operation

The RACBOX rearview mirror features an anti-glare function to reduce dazzling light from vehicles behind you, especially at night. It also helps prevent fogging for clearer vision.

Anti-Glare Function:

Locate the anti-glare switch, typically a small lever or button, at the bottom edge of the mirror. Flipping or pressing this switch will adjust the mirror's angle or tint, reducing the intensity of reflected light and preventing dazzling ripples.

Close-up of the anti-glare switch on the rearview mirror
The anti-glare switch helps prevent dazzling ripples and fogging for improved visibility.

6. Maintenance

To ensure the longevity and optimal performance of your rearview mirror, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, lint-free cloth and a glass cleaner specifically designed for automotive use. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid liquid seeping into the mirror housing.
  • Avoid Abrasives: Do not use abrasive cleaners, pads, or harsh chemicals, as these can scratch the mirror surface or damage the anti-glare coating.
  • Regular Inspection: Periodically check the mirror's mounting for any looseness. Tighten if necessary to ensure it remains securely in place.

7. Troubleshooting

If you encounter any issues with your rearview mirror, consider the following common solutions:

  • Mirror is Loose: Ensure the mirror is correctly seated and locked into its mounting bracket. Re-install if necessary, applying firm but gentle pressure.
  • Anti-Glare Not Working: Verify that the anti-glare switch is fully engaged. If the issue persists, ensure the mirror surface is clean and free from smudges that might interfere with its function.
  • Poor Visibility: Clean the mirror surface thoroughly. If visibility remains poor, check for any obstructions or damage to the mirror itself.

If these steps do not resolve the issue, please contact customer support for further assistance.

8. User Tips

  • Always adjust your rearview mirror before starting your drive to ensure optimal visibility.
  • Utilize the anti-glare feature proactively when driving at night or in conditions with strong light sources behind you.
  • Regularly clean your mirror to maintain its high-definition clarity and anti-fog properties.

9. Warranty and Support

Your RACBOX Anti-Glare Car Interior Rearview Mirror Kit is manufactured to high-quality standards. For any questions, technical support, or warranty claims, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for warranty purposes.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.