1. Introduction
The MILESEEY X6 Laser Distance Meter is a professional rangefinder designed for accurate and fast measurements in various applications such as DIY, decorating, and building projects. It features an angle display, multiple measurement modes, and a large LCD backlit screen for ease of use.

2. Package Contents
Upon opening the package, please verify that all the following items are included:

- MILESEEY X6 Laser Distance Meter
- Packing Box
- Storage Bag
- Instruction Manual
- Certificate
- Lanyard
3. Specifications
| Feature | Basic Version | Rechargeable Version |
|---|---|---|
| Measuring Accuracy | ±2mm | |
| Measuring Units | m/in/ft /ft+in | |
| Laser Class | Class 2 | |
| Laser Type | 630-670nm, <1mW | |
| Area, Volume Measurement | Yes | |
| Pythagorean | Yes | |
| Secondary Pythagorean | Yes | |
| Automatic Level | Yes | |
| Automatic Vertical | Yes | |
| Angle Sensor | Yes | |
| Rechargeable | No | Yes |
| Angle Measurement Accuracy | ±(0.3°+0.1°+0.01*D) | |
| Measurement Benchmark | Before/after benchmark | |
| Addition and Subtraction | Yes | |
| Continuous Measurement | Yes | |
| Single Distance Measurement | Yes | |
| Beeper | Yes | |
| Historical Memory | 20 groups | |
| Battery | AAA 1.5V battery (Not Included) | Rechargeable battery (Included) |
Additional Specifications:
- High-concerned chemical: None
- Certification: CE, FCC
- Origin: Mainland China
- Power Type: Battery-Powered
- Size: 120*48*27 mm
4. Safety Information
The MILESEEY X6 uses a Class 2 laser. Please observe the following safety precautions:
- Do not stare directly into the laser beam.
- Do not aim the laser beam at people or animals.
- Avoid using the device near reflective surfaces that could redirect the laser beam into your eyes.
- Keep the device out of reach of children.
5. Setup
Battery Installation
For Basic Version: The Basic version requires AAA 1.5V batteries (not included). Open the battery compartment cover on the back of the device, insert the batteries according to the polarity markings, and close the cover.
For Rechargeable Version: The Rechargeable version comes with a built-in rechargeable battery. Ensure it is charged before first use. (Note: Basic version does not support charging and does not come with a USB cable).
6. Operating Instructions
Controls Overview
- MEAS Button: Initiates measurements and confirms selections.
- UNIT Button: Changes measurement units (m/in/ft /ft+in).
- CLEAR Button: Clears the last measurement or exits a mode.
- Power Button: Turns the device on/off.
- +/- Button: For addition/subtraction functions.
- Grid Button: Cycles through measurement modes.
Power On/Off
Press the Power button to turn the device on. Press and hold the Power button to turn it off.
Unit Conversion
Press the UNIT button to cycle through the available measurement units: meters (m), inches (in), feet (ft), and feet+inches (ft+in).
Mute Function

The sound can be turned on and off at any time by pressing the mute button, ideal for use in quiet places such as classrooms and libraries.
Measurement Modes
Press the Grid button to cycle through the various measurement modes.
- Single Measurement:

Figure 4: Single Measurement. The diagram illustrates measuring a single distance of 1.2m. The device will be in single distance measurement mode when switched ON. Press MEAS after aiming at the target to get the result in the summary line.
- Continuous Measurement:

Figure 5: Continuous Measurement. The diagram shows the device measuring minimum and maximum distances during continuous sweeping. Long press MEAS to activate continuous measurement. Sweep the laser back and forth and up and down over the desired target point from a fixed measuring point. The maximum and minimum distances are displayed on the screen, as well as the last measured value in the summary line. This function will stop automatically after about 40 seconds of inactivity.
- Area Measurement:

Figure 6: Area Measurement. The diagram shows measuring length (3.6m) and width (1.8m) to calculate area. Press the Grid button to select area measurement mode. According to the reminder of the flashing line, press MEAS to get the distance for the 1st line (Length), then press MEAS again for the 2nd line (Width). The area is calculated and displayed in the summary line.
- Volume Measurement:

Figure 7: Volume Measurement. The diagram illustrates measuring length (3.6m), width (1.8m), and height (2.8m) to calculate volume. Press the Grid button to select volume measurement mode. According to the reminder of the flashing line, press MEAS to get the distance for the 1st line (Length), press MEAS again for the 2nd line (Width), and press MEAS a third time for the 3rd line (Height). The volume is calculated and displayed in the summary line.
- Pythagorean Measurement:

Figure 8: Pythagorean Measurement. This diagram shows various Pythagorean modes for calculating unknown distances based on measured sides of a right triangle. Press the Grid button to select Pythagorean mode. Follow the on-screen prompts to measure the required sides of the triangle. The device will calculate the unknown side. There are modes for single Pythagorean, secondary Pythagorean, and other variations.
- Automatic Level:

Figure 9: Automatic Level. The diagram illustrates measuring the hypotenuse to determine vertical and horizontal distances. Press the Grid button to select Auto Level mode. According to the reminder of the flashing line, press MEAS to get the distance of the hypotenuse. The vertical and horizontal lines are displayed in line accordingly.
- Automatic Vertical:

Figure 10: Automatic Vertical. The diagram shows measuring two points to determine vertical height. Press the Grid button to select auto height mode. According to the reminder of the flashing line, press MEAS to get the distance for the 1st line, press MEAS again for the 2nd line. You can then get the vertical height displayed in the summary line.
- Angle Measurement Function:

Figure 11: Angle Measurement. The diagram shows the device displaying an angle of 52.5 degrees. The built-in angle sensor cooperates with various angle measurement needs, providing accuracy of ±0.3° angle real-time display for more intuitive data.
Historical Memory

The device can store up to 20 groups of historical data for easy recall and review.
7. Maintenance
Cleaning
Use a soft, damp cloth to clean the device. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the casing or optics. Ensure the laser lens is clean for accurate measurements.
Storage
Store the MILESEEY X6 in a dry, dust-free environment, preferably in its protective storage bag. If you are not using the Basic version for an extended period, remove the AAA batteries to prevent leakage.
Dustproof and Waterproof

The MILESEEY X6 is designed to be dustproof and waterproof, offering durability in various working conditions. However, avoid prolonged exposure to extreme moisture or submersion, as this may still cause damage.
8. Troubleshooting
- Device not turning on:
Check the batteries. For the Basic version, ensure fresh AAA batteries are correctly installed. For the Rechargeable version, ensure the device is fully charged. - Inaccurate readings:
Ensure the laser is aimed correctly at a flat, non-reflective surface. Clean the laser lens if it appears dirty. Verify the measurement benchmark setting (front or rear of the device). - Display issues:
If the display is dim or flickering, check the battery level. Try restarting the device by turning it off and on again. - Laser not visible:
In bright sunlight or outdoor conditions, the laser dot may be difficult to see. Consider using a target plate or working in shaded areas.
9. User Tips
- For the most accurate measurements, always ensure the device is stable and the laser beam is perpendicular to the target surface.
- When measuring long distances, especially outdoors, using a target plate can significantly improve accuracy and visibility.
- Utilize the mute function in noise-sensitive environments like libraries or during quiet work hours to avoid disturbance.
- Regularly check the battery level to avoid interruptions during critical measurements.
10. Warranty and Support
For warranty information and technical support, please refer to the manufacturer's official website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.