WAVLINK 5-Port Gigabit PoE Switch with AC Controller

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your WAVLINK 5-Port Gigabit PoE Switch with AC Controller. This device is designed to provide high-speed network connectivity and centralized management for Access Points (APs) in various environments such as homes, offices, villas, and hotels.

2. Product Overview

The WAVLINK 5-Port Gigabit PoE Switch with AC Controller integrates Power over Ethernet (PoE), AC control, and routing technologies into a single compact device. It features all Gigabit ports to ensure high-speed data transmission without bandwidth waste.

Key features include:

• PoE-Integrated AC Router: Configure and manage multiple APs with zero-configuration, plug-and-play functionality.
• All Gigabit Ports: Both WAN/LAN ports support gigabit Ethernet connections for a high-speed network experience.
• Integrated AC Management: Capable of managing up to 30 APs and supporting up to 128 devices.
• Efficient Heat Dissipation: Designed to remain cool under heavy loads, ensuring reliable and optimal performance.
• AP LED Indicator Control: Allows toggling LED lights on lower-level APs for enhanced flexibility.
• Compact & Sleek Body: Ideal for snug spaces like electrical boxes, suitable for home and small business networking.

3. Package Contents

Please check the package contents carefully. If any item is missing or damaged, contact your vendor immediately.

• WAVLINK 5-Port Gigabit PoE Switch with AC Controller (WL-WN701AE)
• Power Adapter (DC 54V/1.17A, 63.18W)
• Ethernet Cable (100cm/39.4in)
• Quick Start Guide

4. Setup Instructions

Follow these steps to set up your WAVLINK PoE Switch:

1. Power Up: Connect the provided power adapter to the DC In port of the switch and then plug the adapter into a power outlet.
2. Connect WAN Port: Link the WAN port of the PoE switch to the LAN port of your superior router or existing network switch using an Ethernet cable.
3. Connect LAN Ports: Connect your Access Points (APs), outdoor routers, or other network devices to the LAN ports (LAN1-LAN4) of the PoE switch. These ports provide both data and power (PoE) to compatible devices.

Ensure you use the correct power plug type for your region:

5. Operating Instructions

The WAVLINK PoE Switch functions as a central management unit for your Access Points (APs), offering advanced network control and optimization.

5.1. Centralized AP Management

This device allows you to easily manage your APs with centralized controls and customize your wireless network with intuitive WLAN settings. Features include:

• Firewall Protection
• AP LED Control (toggle LED lights on/off)
• Network Segmentation
• DDNS & Port Forwarding
• UPnP Services
• IPTV Support
• Supports AP customized group management
• Supports WiFi configuration for guest-only networks

Note: Centralized AP management features are only compatible with select WAVLINK AP models. For other brands, the device functions primarily as a Gigabit PoE switch.

5.2. Network Expansion

The switch is designed to connect with APs for easy networking, providing seamless WiFi coverage for various environments. For connecting over 4 APs, an additional switch may be required.

6. Specifications

7. Troubleshooting

• No Power: Ensure the power adapter is securely connected to both the switch's DC In port and a working power outlet. Check the power adapter for any damage.
• No Network Connectivity:
  • Verify that the Ethernet cables are properly connected to the WAN and LAN ports.
  • Check the status LEDs on the switch and connected devices to ensure they are active.
  • Confirm that your main router or upstream network device is functioning correctly.
• PoE Devices Not Powering On:
  • Ensure the connected device is PoE-compatible and adheres to IEEE 802.3af/at standards.
  • Check the Ethernet cable for damage or improper connection.
  • Verify that the total power consumption of all connected PoE devices does not exceed the switch's power budget (63.18W).
• Cannot Access AP Management Interface:
  • Ensure your computer is connected to the same network as the PoE switch.
  • Refer to the Quick Start Guide for the default IP address and login credentials for the AC Controller interface.
  • Remember that centralized AP management is specific to WAVLINK AP models.
• Slow Network Speed:
  • Confirm all connected devices and cables support Gigabit Ethernet (1000Mbps).
  • Check for network congestion or excessive traffic.

8. User Tips

• Compatibility Check: Before connecting any Access Point (AP) or other network device, ensure it is compatible with the IEEE 802.3af/at PoE standard if you intend to power it via the switch's LAN ports.
• Optimal Placement: For best performance, place the switch in a well-ventilated area to aid in efficient heat dissipation.
• Cable Quality: Use high-quality Cat5e or Cat6 Ethernet cables for all connections to ensure reliable Gigabit speeds.
• Reset Function: If you encounter persistent issues, a 6-second press of the Reset button will restore the device to factory default settings.

9. Warranty and Support

WAVLINK provides a 1-year warranty for this product from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For technical support, troubleshooting assistance, or warranty claims, please contact WAVLINK customer service through their official website or the contact information provided in your Quick Start Guide.

Please retain your proof of purchase for warranty validation.