1. Introduction
This manual provides detailed instructions for assembling and operating your Wishiot MOC 4WD Remote Control Car Chassis Kit. Designed for enthusiasts of building blocks and remote-controlled vehicles, this kit allows for the creation of various 4WD technical car models. Please read all instructions carefully before beginning assembly.
2. Specifications
| Feature | Detail |
|---|---|
| Product Name | MOC Remote Control Car Model |
| Category | Building Blocks, Remote Control Set, Car Model |
| Material | ABS Plastic |
| Remote Control | Yes |
| Power Source | AA Battery Box (No Battery Included) |
| Recommended Age | 14+ years |
| Compatibility | For MOC Power Functions |
| High-concerned chemical | None |
| Package Weight | 0.6 kg |
| Package Dimensions | 10cm x 10cm x 10cm |
3. Package Contents
The contents of your kit may vary depending on the specific bundle purchased. Please refer to the bundle picture for exact components. Common components include:
- Building blocks for chassis assembly
- Large size tracks (e.g., 100 pieces of grey color track 57518)
- Wheels (e.g., 4 pieces of black wheels 57519, diameter 41mm)
- M Motor
- Servo Motor
- AA Battery Box
- Remote Control

4. Assembly Instructions
This kit consists of loose parts and requires self-assembly. Follow the general guidelines below. For specific model configurations, refer to the visual guides provided in the product images.
4.1. Chassis Construction
Begin by assembling the main chassis structure using the provided building blocks. Ensure all connections are secure to form a stable base for your vehicle.

4.2. Track and Wheel Installation
- Attach the wheels (e.g., part 57519) to the designated axles on the chassis.
- Connect the large size track pieces (e.g., part 57518) to form continuous loops around the wheels. Ensure the tracks are taut but can move freely.
4.3. Motor and Servo Installation
- Integrate the M Motor and Servo Motor into the chassis according to your desired drive configuration. These motors are essential for the vehicle's movement and steering.
- Securely connect the motors to the gear drive system.

4.4. Battery Box and Remote Control Setup
- Install AA batteries (not included) into the AA Battery Box.
- Connect the battery box to the motors and receiver unit (if applicable) following the wiring diagram for your specific power functions setup.
- Ensure the remote control is paired with the receiver unit. Typically, this involves powering on both devices and pressing a pairing button or sequence.


5. Operating Instructions
5.1. Power On
Ensure the battery box is loaded with fresh AA batteries and the power switch on the battery box is in the 'ON' position. Turn on your remote control.
5.2. Driving the Vehicle
Use the joysticks or buttons on the remote control to maneuver your MOC vehicle. Typically:
- One joystick controls forward/backward movement.
- Another joystick or set of buttons controls left/right steering.
Familiarize yourself with the remote control's layout and responsiveness in an open area.
5.3. Customization and Expansion
The chassis features expansion slots and a DIY baseplate, allowing you to add more building blocks and customize your vehicle's appearance and functionality. Experiment with different designs and attachments.



6. Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the building blocks and electronic components. Avoid using water or harsh chemicals.
- Battery Care: Remove batteries from the battery box and remote control if the vehicle will not be used for an extended period to prevent leakage.
- Storage: Store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically check all connections and moving parts for wear or damage. Replace any broken or worn-out pieces.
7. Troubleshooting
- Vehicle not moving:
- Check if batteries are correctly installed and have sufficient charge.
- Ensure the power switch on the battery box is 'ON'.
- Verify that all motor connections are secure.
- Confirm the remote control is paired with the receiver.
- Erratic movement:
- Check for loose connections in the wiring.
- Ensure tracks are properly aligned and not obstructed.
- Replace remote control batteries if they are low.
- Parts not fitting:
- Double-check the assembly steps against the visual guides.
- Ensure you are using the correct pieces for each step.
8. User Tips
No specific user tips were available from reviews or Q&A for this product. However, general tips for MOC building block kits include:
- Organize your pieces before starting assembly to make the process smoother.
- Take your time with each step to ensure correct and secure connections.
- Experiment with different configurations to personalize your vehicle.
9. Warranty and Support
For any issues or inquiries regarding your Wishiot MOC 4WD Remote Control Car Chassis Kit, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase. Information regarding returns and refunds can be found on the platform where the product was purchased.