IINE Aether Radiant Silver Wireless Controller with Charging Dock

1. Introduction

Thank you for choosing the IINE Aether Radiant Silver Wireless Controller with Charging Dock. This manual provides essential information for setting up, operating, and maintaining your new controller. This device is designed to enhance your gaming experience across multiple platforms, including Nintendo Switch, PC, iOS, and Android, featuring advanced functionalities like motion sensing, NFC, and programmable macro buttons.

Image: IINE Aether Radiant Silver Wireless Controller with Charging Dock.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x IINE Aether Radiant Silver Wireless Controller
• 1 x Charging Station
• 1 x USB Charging Cable
• 1 x User Manual

Image: Visual representation of the package contents and detailed parameters.

3. Specifications

4. Setup

4.1 Initial Charging

Before first use, fully charge your controller. Connect the charging cable to the charging station and a power source (e.g., USB wall adapter, console USB port). Place the controller onto the charging dock. The controller will begin charging automatically. The charging dock is designed for convenience: the controller charges when placed down and wakes/reconnects when lifted up.

Image: Illustration of the smart charging dock functionality.

4.2 Pairing with Your Device

The controller supports multi-platform compatibility. The specific pairing method may vary slightly depending on your device (Nintendo Switch, PC, iOS, Android). Generally, you will need to:

1. Ensure the controller is sufficiently charged.
2. Put your device (e.g., Nintendo Switch console) into pairing mode.
3. On the controller, press and hold the pairing button (refer to the controller diagram in the user manual for exact location) until the indicator lights begin to flash, indicating it is in pairing mode.
4. Once the device detects the controller, select it to complete the pairing process.
5. After successful pairing, the indicator lights on the controller will stabilize.

5. Operating Instructions

5.1 Motion Sensor & NFC Function

The controller is equipped with a motion sensor for games that utilize tilt and movement controls. It also features a built-in high-performance NFC chip, allowing for fast scanning of compatible items, such as Amiibo figures on the Nintendo Switch.

Image: Controller supporting Amiibo scanning via NFC.

5.2 Macro & Turbo Function

The controller includes programmable macro buttons (M1 and M2) and a Turbo function to enhance gameplay efficiency. You can assign a sequence of button presses to the macro buttons for quick execution of complex actions. The Turbo function allows for rapid, continuous input of a button press by holding it down.

Refer to the detailed instructions in the included user manual for programming macro buttons and activating the Turbo function.

Image: Rear view of the controller highlighting M1 and M2 macro buttons.

5.3 Battery Status Check

To check the current battery level of your controller, press the dedicated battery status button. The indicator lights on the controller will illuminate to show the remaining charge:

• Four lights: 100% charge
• Three lights: 75% charge
• Two lights: 50% charge
• One light: 25% charge (recharge soon)

Image: Diagram showing how to check battery status and corresponding indicator lights.

6. Maintenance

To ensure the longevity and optimal performance of your controller, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to wipe the controller and charging dock. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution, then wipe dry immediately. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the controller and charging dock in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
• Handling: Avoid dropping the controller or subjecting it to strong impacts. Do not attempt to disassemble the controller or charging dock, as this may void the warranty and cause damage.

7. Troubleshooting

If you encounter issues with your IINE Aether Radiant Silver Wireless Controller, please refer to the following common solutions:

7.1 Controller Not Connecting/Pairing

• Check Battery: Ensure the controller is fully charged. Refer to section 5.3 for battery status check.
• Re-pair: Delete the controller from your device's Bluetooth settings and attempt to pair it again following the steps in section 4.2.
• Restart Devices: Restart both your gaming device (console, PC, phone) and the controller.
• Interference: Move closer to your device and away from other wireless devices that might cause interference.

7.2 Charging Issues

• Check Connections: Ensure the USB charging cable is securely connected to both the charging dock and the power source.
• Verify Power Source: Try a different USB port or power adapter to rule out issues with the power source.
• Controller Placement: Ensure the controller is correctly seated on the charging dock.

7.3 NFC Function Not Working

• Correct Placement: Ensure the Amiibo or NFC-compatible item is placed directly over the NFC detection area on the controller.
• Game Compatibility: Verify that the game you are playing supports NFC functions.

7.4 Macro/Turbo Function Not Responding

• Re-program: Re-program the macro buttons or re-activate the Turbo function according to the instructions in the full user manual.
• Game Compatibility: Some games may not fully support or may have conflicts with macro/turbo functions.

8. User Tips

• Nintendo Switch Compatibility: This controller is fully compatible with the Nintendo Switch, offering an enhanced gaming experience with its motion sensor and NFC capabilities.
• Multi-Platform Use: Take advantage of the controller's versatility by using it across PC, iOS, and Android devices for a consistent gaming experience.

9. Warranty and Support

9.1 Product Warranty

All IINE products are guaranteed to be brand new and authentic. This product comes with a three-month guarantee from the date of purchase. This warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, or unauthorized modifications.

9.2 Customer Support

For any questions, technical support, or warranty claims, please contact the seller or manufacturer through the platform where you purchased the product. Please have your purchase details ready when contacting support.