LAUNCH DBScar5/7 Connector DS401

Contents

Launch X431 DBScar5/7 Connector Bluetooth Adapter DS401 User Manual

OBD2 Scanner Diagnostic Tool for Launch X431 V / V+ / Pro / Pro3 / Pros

1. Introduction

This manual provides detailed instructions for the proper use, setup, and maintenance of your Launch X431 DBScar5/7 Connector Bluetooth Adapter DS401. This device is designed to function as a Bluetooth diagnostic connector for various Launch X431 diagnostic tools, enabling communication between your vehicle's On-Board Diagnostics (OBD2) system and your Android tablet or phone.

The DBScar5/7 connector is a hardware component and does not include diagnostic software. It requires an existing Launch X431 diagnostic device (such as X431 V, V+, Pro, Pro3, Pros, or Diagun IV) to operate.

Front view of the Launch DBScar VII connector
Figure 1: Front view of the Launch DBScar VII connector

2. Safety Information

  • Always ensure the vehicle's ignition is OFF before connecting or disconnecting the OBD2 scanner.
  • Do not attempt to disassemble or modify the connector.
  • Keep the device away from water, extreme temperatures, and direct sunlight.
  • Use only the provided or approved cables and accessories.
  • Ensure a stable connection to avoid data corruption or damage to the device or vehicle.

3. Package Contents

Your package should contain the following items:

  • 1 x Launch DBScar5/7 DS401 Bluetooth Connector
  • 1 x Diagnostic Cable (if applicable, for connection to older X431 devices)
Image of the Launch DBScar5 DS401 Bluetooth Connector
Figure 2: Launch DBScar5 DS401 Bluetooth Connector
DBScar VII connector with its diagnostic cable and an older version connector
Figure 3: DBScar VII connector with diagnostic cable and older connector for comparison

4. Specifications

FeatureSpecification
Model NameDS401
Brand NameLAUNCH
Wireless FunctionNo (refers to internal wireless, uses Bluetooth for external connection)
Wireless SupportNo (refers to internal wireless, uses Bluetooth for external connection)
Is Batteries IncludedNo
OriginMainland China
CertificationCE
Package Length15 cm
Package Width10 cm
Package Height3 cm
Package Weight0.17 kg

5. Setup

5.1. Physical Connection to Vehicle

  1. Ensure the vehicle's ignition is OFF.
  2. Locate the Diagnostic Link Connector (DLC), typically found under the dashboard on the driver's side.
  3. Connect the DBScar5/7 connector to the vehicle's DLC port.
  4. Turn the vehicle's ignition ON (engine OFF).

5.2. Software Binding and Activation

Important: You must provide your X431 machine serial number to the seller after purchase for the new connector to be matched and activated. Without this, the connector will not function with your device.

  1. After receiving your new DBScar connector, check the serial number printed on it.
  2. Verify that this new serial number has been updated and registered in your Launch X431 account. If not, contact your seller immediately.
  3. Update your Launch X431 diagnostic device (e.g., X431 Diagun IV, X431 Pro Mini) to the latest software version. This ensures compatibility with the new connector.
Screenshot of the Launch Download center webpage, highlighting the Product SN field for serial number entry.
Figure 4: Example of Product SN entry in the Launch Download Center

5.3. Bluetooth Pairing with Android Device

The DBScar5/7 Bluetooth connector is used to connect your X431 device to an Android tablet or Android phone.

  1. On your Android tablet or phone, go to the Bluetooth settings and ensure Bluetooth is enabled.
  2. On your Launch X431 diagnostic device, navigate to the 'SET' button and choose 'Bluetooth'.
  3. Search for available Bluetooth devices. The DBScar connector should appear with its serial number (e.g., 9892800).
  4. Select the DBScar connector to pair. Follow any on-screen prompts to complete the pairing process.
Screenshot of a Bluetooth Connection screen on a Launch device, showing a serial number and connection status.
Figure 5: Bluetooth Connection screen on a Launch device

6. Operation

6.1. Using the OBD2 Scanner

  1. Ensure the ignition is ON (engine OFF).
  2. Access the scanner menu on your Launch X431 device for OBD codes.
  3. Identify and understand the OBD codes displayed.
  4. Diagnose the trouble codes based on the information provided by the scanner.
  5. If necessary, reset the check engine light after addressing the underlying issue.

6.2. Accessing the Scanner Menu

The scanner menu provides various diagnostic functions:

  • Active Codes: These codes trigger the check engine light and indicate a current emissions control failure.
  • Pending Codes: These codes indicate a potential emissions control failure that has not yet triggered the check engine light. Persistent pending codes may become active.
  • OBD Code Structure: OBD codes typically start with a letter followed by four digits.
    • P (Powertrain): Relates to engine, transmission, ignition, emissions, and fuel system.
    • B (Body): Relates to airbags, power steering, seatbelts, etc.
    • C (Chassis): Relates to axles, brake fluid, ABS.
    • U (Undefined): Miscellaneous issues.
  • First Digit (after letter): Indicates whether the code is Generic (0) or Manufacturer-Specific (1).
  • Second Digit: Specifies the particular vehicle part or system.
  • Last Two Digits: Indicate the exact problem.

6.3. Diagnosing and Resetting Codes

  • The OBD scanner identifies issues but does not fix them. Determine if the error code is minor or requires immediate attention.
  • To reset the check engine light, navigate to the main menu, select the 'Check Engine Light' option, and press 'Reset'.

6.4. Menu Options Overview

  • Read Codes: Displays Diagnostic Trouble Codes (DTCs) and their descriptions. Allows scrolling through all stored or pending codes.
  • Erase Codes: Clears codes and failure data. A confirmation will be requested before deletion.
  • Live Data: Provides real-time sensor readings, which helps identify non-switching sensors or other dynamic issues.
  • Freeze Frame: Shows parameters at the exact moment a DTC was set, providing a snapshot of vehicle conditions.
  • I/M Readiness (VM Readiness): Indicates the status of emissions and smog test readiness monitors.

7. Maintenance

  • Keep the connector clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Store the device in a cool, dry place when not in use.
  • Avoid dropping the device or subjecting it to strong impacts.
  • Regularly check cables for any signs of wear or damage. Replace damaged cables immediately.

8. Troubleshooting

Q: The new DBScar connector is not working with my X431 device.
A: Ensure you have provided your X431 machine's serial number to the seller for proper binding. The connector is customized to your specific device. Also, verify that your X431 device's software is updated to the latest version.
Q: My X431 device cannot find the DBScar connector via Bluetooth.
A: Make sure the DBScar connector is properly plugged into the vehicle's OBD2 port and the vehicle's ignition is ON. Check that Bluetooth is enabled on both your Android device and your Launch X431 diagnostic tool. Try restarting both devices.
Q: The diagnostic software is not compatible with the DS401 Bluetooth adapter.
A: The DS401 is a hardware adapter. Software compatibility depends on your Launch X431 diagnostic tool and its installed programs. Ensure your X431 device has the necessary diagnostic programs for the vehicles you intend to scan.
Q: My old DBScar connector stopped working after binding the new one.
A: Once a new DBScar connector is bound to your X431 device, the previous connector (e.g., DBScar4) will no longer function with that specific X431 device. This is a standard procedure for Launch products.

9. User Tips

  • Serial Number is Key: Always provide your X431 machine's serial number to the seller for the new DBScar connector to be correctly matched and activated. This is a critical step for functionality.
  • Keep Software Updated: Regularly update your Launch X431 diagnostic device's software to ensure optimal performance and compatibility with the DBScar connector and new vehicle models.
  • Check Compatibility: Before purchasing, confirm with the seller if the DBScar5/7 connector is compatible with your specific Launch X431 model and its serial number range (e.g., X431 V+ uses SN starting with 98559, X431 Pro Mini uses 98952 or 98639).
  • Easy Setup: Users have reported the setup process to be straightforward. Follow the instructions carefully for a smooth experience.

10. Warranty and Support

This product is a customized hardware component. Returns or refunds may not be acceptable once the connector has been bound to your device. If you encounter any problems during the use of your new DBScar connector, please contact your seller for assistance. They will help you troubleshoot and resolve any issues.

For additional information and detailed instructions, you may refer to the official user manual PDF available at: User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.