QYT CB-58

Contents

QYT CB-58 Walkie Talkie User Manual

Model: CB-58 | Brand: QYT

1. Introduction

Thank you for choosing the QYT CB-58 Walkie Talkie. This handheld Citizen Band (CB) radio is designed for reliable communication within the 27MHz frequency range, offering both AM and FM modulation modes. With 40 channels and a robust 4100mAh battery, it is suitable for various applications requiring portable two-way radio communication. This manual provides essential information for the proper setup, operation, and maintenance of your device.

2. Package Contents

Please check the contents of your package upon receipt. The QYT CB-58 is available in different configurations:

2.1 Standard Package

  • 1x Radio Body
  • 1x Battery
  • 1x Antenna
  • 1x Charger
  • 1x Belt Clip
  • 1x Handstrap
  • 1x User Manual
Standard Package Contents
Figure 2.1: Standard Package Contents (Radio Body, Battery, Antenna, Charger, Belt, Handstrap, Manual)

2.2 Simple Package

  • 1x Radio Body
  • 1x Antenna
  • 1x Handstrap
  • 1x User Manual
  • 1x Battery Box (Battery and Charger NOT Included)
Simple Package Contents
Figure 2.2: Simple Package Contents (Radio Body, Antenna, Handstrap, Manual, Battery Box)

3. Product Overview

The QYT CB-58 features a compact design with an intuitive interface for ease of use.

Front view of QYT CB-58 radio with display
Figure 3.1: Front view of the QYT CB-58 radio, showing the display and main controls.

3.1 Controls and Display

  • TFT LCD Display: Shows frequency, channel, battery status, and other operational indicators.
  • AM/FM Button: Toggles between Amplitude Modulation and Frequency Modulation.
  • SCN (Scan) Button: Initiates channel scanning.
  • EMG (Emergency) Button: Accesses emergency channels.
  • MEM (Memory) Button: Manages memory channels.
  • FUN (Function) Button: Activates secondary functions for other buttons.
  • OK Button: Confirms selections.
  • EXIT Button: Exits menus or cancels operations.
  • PTT (Push-to-Talk) Button: Located on the side, used for transmitting.
  • LAMP Button: Activates the flashlight or backlight.
  • CALL Button: Initiates a call tone or specific call function.
  • Volume/Power Knob: Located on top, controls power on/off and audio volume.
  • Squelch Knob: Located on top, adjusts the squelch level to filter out noise.
  • Antenna Connector: BNC type, for attaching the antenna.
Left side view of QYT CB-58 radio
Figure 3.2: Left side view showing PTT, LAMP, and CALL buttons.
Top view of QYT CB-58 radio
Figure 3.3: Top view showing antenna connector, volume/power, and squelch knobs.

4. Specifications

Category Specification
Model Number QYT CB-58 Walkie Talkie
Walkie Talkie Type Portable
Modulation Mode AM/FM
Frequency Range 26.965-27.405MHz
Storage Channel 40 Channel
Output Power (W) 4W (3W-5W)
Maximum Range 3km-5km
Battery Capacity (mAh) 4100mAh
Battery Included Yes (Standard Package)
Input Voltage 12.6V
Dimensions (W x D x H) 165mm x 67mm x 44mm
Operating Temperature Range -20℃ to 55℃
Antenna Connector BNC
Waterproof / Water-Resistant No
Certification CE, Dot, EAC, EPA, FCC, GMP, RoHS, TGA, UL, KC, pse, weee
Receiver Sensitivity Less than 1uV for 10dB (S+N)/N
Receiver Image Rejection 70dB
Receiver Adjacent Channel Rejection 60dB
Receiver IF Frequencies 1st: 10.695MHz, 2nd: 455KHz

5. Setup

5.1 Battery Installation

  1. Ensure the radio is powered off.
  2. Locate the battery compartment on the back of the radio.
  3. If applicable, remove the battery compartment cover by sliding it down or unlatching it.
  4. Insert the battery (if included in your package) into the compartment, ensuring the contacts align correctly with the radio's terminals.
  5. Replace the battery compartment cover, ensuring it clicks securely into place.
  6. If using the Simple Package, insert appropriate batteries into the provided battery box and then attach the battery box to the radio.

5.2 Antenna Attachment

  1. Locate the BNC antenna connector on the top of the radio.
  2. Align the antenna's connector with the radio's connector.
  3. Push down and twist the antenna clockwise until it locks securely into place.

5.3 Charging (for Standard Package)

  1. Connect the charger to a power outlet.
  2. Connect the charger cable to the charging port on the radio or the battery.
  3. The charging indicator light will typically show red during charging and turn green when fully charged.
  4. Do not overcharge the battery. Disconnect once fully charged.

6. Operation

6.1 Power On/Off and Volume Control

  • To power on the radio, rotate the Volume/Power knob clockwise until you hear a click.
  • Continue rotating the knob clockwise to increase the volume, and counter-clockwise to decrease it.
  • To power off, rotate the knob counter-clockwise until it clicks off.

6.2 Channel Selection

  • Use the Up/Down arrow buttons (usually located below the display) to navigate through the 40 available channels.
  • The selected channel will be displayed on the TFT LCD.
  • Shortcut Channels: Press the dedicated 9/19 button (if available) to quickly switch to emergency channel 9 or information channel 19.

6.3 AM/FM Mode Selection

  • Press the AM/FM button to toggle between Amplitude Modulation (AM) and Frequency Modulation (FM) modes.
  • The current modulation mode will be indicated on the display.

6.4 Squelch Adjustment

  • Rotate the Squelch knob to adjust the squelch level.
  • Increasing the squelch level will filter out weaker signals and background noise, providing clearer audio for stronger signals. Decreasing it will allow reception of weaker signals.
  • The radio also features an Automatic Squelch function for convenience.

6.5 Transmitting and Receiving

  • To receive, simply ensure the radio is powered on and tuned to an active channel.
  • To transmit, press and hold the PTT (Push-to-Talk) button on the side of the radio. Speak clearly into the microphone.
  • Release the PTT button to return to receive mode.

6.6 Advanced Features

  • CTCSS/DCS: Continuous Tone-Coded Squelch System / Digital Coded Squelch for filtering unwanted communications. Refer to the full manual for programming.
  • DTMF: Dual-Tone Multi-Frequency signaling for specific applications.
  • TOT (Time-Out Timer): Prevents accidental long transmissions.
  • NB/ANL Wave Filter: Noise Blanker / Automatic Noise Limiter to reduce impulse noise.
  • Audio High Frequency Cancellation: Improves audio clarity.
  • Keyboard Lock: Prevents accidental button presses. Activate/deactivate via the FUN button and a designated key (refer to display icons).

7. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or solvents.
  • Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Store the radio and battery in a cool, dry place when not in use for extended periods.
  • Antenna: Ensure the antenna is securely attached but do not overtighten. Avoid bending or stressing the antenna.
  • Storage: Store the radio in a dry environment, away from extreme temperatures and direct sunlight.

8. Troubleshooting

Problem Possible Cause Solution
Radio does not power on Low or dead battery; improperly installed battery. Charge the battery or replace it. Ensure battery is installed correctly.
Cannot transmit or receive Incorrect channel/frequency; squelch too high; antenna not connected; radio in scan/memory mode. Verify channel and frequency. Lower squelch level. Check antenna connection. Exit scan/memory mode.
Poor audio quality / Noise Weak signal; high interference; squelch too low. Move to an area with better signal. Adjust squelch level. Activate NB/ANL filter.
Keyboard is unresponsive Keyboard lock is active. Deactivate keyboard lock (refer to section 6.6).

9. User Tips

  • For best range, ensure your antenna is fully extended and positioned vertically.
  • Always check your local CB radio regulations and channel usage guidelines before operating.
  • Keep the radio's firmware updated if updates become available from the manufacturer.
  • Consider carrying a spare charged battery for extended use, especially if you have the Simple Package.

10. Warranty and Support

This product comes with a standard warranty. For specific warranty terms, service, or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.

For general information regarding product service commitments, you may refer to the seller's service commitment details, which often include aspects like product quality assurance.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.