JIKONG JK-B2A8S20P

Contents

JIKONG JK-B2A8S20P Smart BMS User Manual

Model: JK-B2A8S20P | Brand: JIKONG

1. Product Overview

The JIKONG JK-B2A8S20P Smart BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge/over-discharge/overcurrent/over-temperature protection, coulomb metering, Bluetooth communication, and optional GPS remote monitoring.

This BMS is compatible with various battery types, including Li-ion, LiFePO4, and LTO, supporting 4S-8S configurations. It utilizes energy transfer active balancing technology to achieve a continuous balancing current of 1A/2A, ensuring battery consistency, extending battery life, and delaying aging.

The compact design and comprehensive functionality make it suitable for a wide range of applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

JIKONG JK-B2A8S20P Smart BMS with key features listed
JIKONG JK-B2A8S20P Smart BMS highlighting its functions, battery type compatibility, balancing current, battery strings, and charge/discharge capabilities.

Key Features:

  • LED Bluetooth Status Indicator: Provides visual feedback on Bluetooth connection status.
  • APP Bluetooth Remote Operation: Control and monitor the BMS via a mobile application (Android/iOS).
  • Battery Capacity Calculation: Accurate coulomb metering for precise capacity tracking.
  • High Precision Measurement: Voltage acquisition with ±3mV accuracy and high-precision current acquisition.
  • Information Screen Display Support: Compatible with external display screens for real-time data viewing.
  • Accurate Time Logging: Records operational data with precise timestamps.
  • Communication Interfaces: Supports RS485 and CAN protocols (optional).
  • Heating Function: Optional feature for low-temperature battery heating.
  • GPS Communication: Optional GPS port for battery location tracking.
  • Discharge Precharge Function: Optional feature for controlled discharge precharging.
  • Comprehensive Protection: Includes overcharge, over-discharge, overcurrent (charge/discharge), over-temperature (charge/discharge), low-temperature (charge), and short-circuit protection.

2. Specifications

The following tables detail the technical specifications and default parameters for the JIKONG JK-B2A8S20P Smart BMS.

Basic Parameters:

ParameterValueUnit
Supply Voltage10-36V
Operating Power Consumption<900mW
Operating Temperature-30 to 70°C
Maximum Number of Collection Strings8Strings
Maximum Balancing Current2A
Maximum Charging Current200A
Maximum Discharge Current200A
Maximum Instantaneous Current400A
Maximum Internal Loop Resistance0.4mΩ
Protective Plate Size153×126×17.6mm
Finished Weight349g

Default Parameters (JK-B2A8S20P):

ParameterLi-ionLiFePO4LTOUnit
Balancing Initial Voltage332V
Maximum Balancing Current222A
Unit Overcharge Voltage4.23.62.7V
Single Overcharge Protection Recovery4.183.552.65V
Monomer Undervoltage Protection2.822.61.8V
Single Undervoltage Protection Recovery2.852.651.85V
Automatic Shutdown Voltage2.82.51.7V
SOC-0% Voltage2.92.61.85V
SOC-100% Voltage4.183.52.65V
Trigger Balancing Differential Pressure0.010.010.01V
Charging Overcurrent Protection Delay303030S
Charging Overcurrent Protection Release Time606060S
Discharge Overcurrent Protection Delay300300300S
Discharge Overcurrent Protection Release Time606060S
Short-circuit Protection Delay150015001500µS
Short-circuit Protection Release Time606060S
Charging Overtemperature Protection Temperature707070°C
Charging Overtemperature Restore Temperature606060°C
Discharge Overtemperature Protection Temperature707070°C
Discharge Overtemperature Recovery Temperature606060°C
Charging Low Temperature Protection Temperature-20-20-20°C
Charging Low Temperature Restore Temperature-10-10-10°C
MOS Overtemperature Protection Temperature100100100°C
MOS Overtemperature Protection Recovery Temperature808080°C
Device Address000/
Discharge Precharge Time000S
Product Parameters table for JIKONG BMS models
Detailed product specifications for various JIKONG BMS models, including the JK-B2A8S20P.

Physical Dimensions:

Dimensions of JIKONG JK-B2A8S20P BMS
Diagram showing the dimensions of the JK-B2A8S20P protection board: 153mm (length) × 126mm (width) × 17.6mm (height).

3. Setup and Installation

3.1 Unpacking and Inspection

Before installation, carefully unpack the product. Handle the packaging and the BMS gently, avoiding impacts or dropping. Inspect the package for any signs of damage or impact marks before opening. Ensure all components listed in the packing list are present and in good condition.

3.2 Packing List

Packing list for JIKONG BMS
The standard packing list includes the BMS unit, a sampling line (70cm long), an NTC temperature sensor (40cm long), and a switch (50cm long).

3.3 Product Appearance and Interfaces

JIKONG JK-BxA8S-20P BMS with labeled connectors
The image shows the JIKONG JK-BxA8S-20P BMS with its main terminals (P-, B-) and various interface connectors labeled P1 to P6, including temperature, RS485, GPS, display, and heating ports.

3.4 Wiring Instructions

The JK-BxA8S-20P series protection board is designed for 3-8 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure all cables are connected correctly and securely before powering on the BMS.

Connector Definitions:

ConnectorPin No.NameDefinition
P1 (Balance & Acquisition Interface)1B-Total Negative Battery
2B1The first battery positive
3B2The second battery positive
4B3The third battery positive
5B4The fourth battery positive
6B5The fifth battery positive
7B6The sixth battery positive
8B7The seventh battery positive
9B8The eighth battery positive
10B+Protection board power supply, connected to the battery total positive
P2 (Heating Interface)1-5HT-Heater element negative electrode
6CD+Charge indication input positive terminal
7CD-Charge indication input negative terminal
P3 (Display Interface)1VCCDisplay power output
P4 (GPS Interface)1VGPSPower output, voltage close to B+
2TXUART TX, 3.3V
3RXUART RX, 3.3V
4GNDPower/signal ground
P5 (Communication Interface)1DNCAN L/RS485-B signal negative
2DPCAN H/RS485-A signal positive
3GNDSignal ground
P6 (Temperature Interface)1T1AFirst temperature sensor pin A
2T1BFirst temperature sensor pin B
3T2ASecond temperature sensor pin A
4T2BSecond temperature sensor pin B

Wiring Diagram for 8-String Cells:

Wiring diagram for an 8-string battery configuration with JIKONG BMS
This diagram illustrates the wiring method for an 8-string cell configuration. Connect all balance cables (1S-8S) to the P1 connector, the total negative electrode (B-) to the B- terminal, and the total positive electrode (P+) to the P- terminal. Ensure the equal load of motor, inverter, and charger are connected as shown.

Wiring Diagram for 4-String Cells:

Wiring diagram for a 4-string battery configuration with JIKONG BMS
This diagram illustrates the wiring method for a 4-string cell configuration. Connect balance cables (1S-4S) to the P1 connector, the total negative electrode (B-) to the B- terminal, and the total positive electrode (P+) to the P- terminal. Ensure the equal load of motor, inverter, and charger are connected as shown.

4. Operating Instructions

4.1 Device Activation

Before powering on the protection board, double-check that all balance cables are properly connected and that the P- and B- terminals are correctly wired. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or even damage.

Once all connections are verified, power on the protection board. The BMS does not have a power-on control switch. It is designed for charging activation mode: the charger voltage must be 2V higher than the battery voltage. After battery assembly, connect the charger to activate the protection board.

Alternatively, if you have an optional display screen and button, you can activate the BMS by inserting the cable into the display interface and pressing the button.

4.2 APP Installation and Parameter Setting

The JIKONG BMS features a mobile APP for Android and iOS, allowing you to monitor battery status, modify parameters, and control charge/discharge switches via Bluetooth.

QR code for JIKONG BMS mobile APP download
Scan this QR code to download the JIKONG BMS mobile application. Android version 7 or higher is required.

After installing the APP, connect to the BMS via Bluetooth. You can then access the parameter settings page to configure battery type, balance trigger pressure difference (mV), and other operational parameters. For detailed parameter settings, refer to the comprehensive


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.