1. Introduction
The JUNCTEK KM-F Series WiFi Battery Coulomb Meter is an advanced device designed for precise, real-time monitoring of battery parameters. It accurately tracks battery levels, voltage, current, power, and estimated charging/discharging times. With WiFi and Bluetooth connectivity, it allows for remote monitoring and control via a mobile application, making it ideal for RVs, solar systems, electric vehicles, and other battery-powered applications. This manual provides essential information for the proper installation, operation, and maintenance of your coulomb meter.
2. Safety Information
- Always ensure proper wiring connections to prevent damage to the device or battery.
- Do not expose the device to extreme temperatures, moisture, or corrosive environments.
- Handle with care to avoid physical damage.
- Disconnect power before performing any installation or maintenance.
3. Package Contents
Verify that all items are present in your package:
- Display Module x 1
- Sampler (50A, 100A, 400A, or 600A depending on model) x 1
- 5 Meters Communication Cable x 1
- 1 Meter Red Positive Wire x 1
- Quick Start Guide x 1

4. Product Overview
The KM-F Series consists of a display module and a sampler unit. The display provides a clear interface for monitoring, while the sampler measures current and voltage. Different sampler capacities are available to suit various applications.


Dimensions

5. Installation & Wiring
Proper wiring is crucial for accurate measurement and safe operation. Refer to the diagram below for typical connections. The KM140F model is used as an example, but the general principle applies to all KM-F series models.
- Connect the sampler unit in series with the negative terminal of your battery bank and the load/charger.
- Connect the V+ terminal of the sampler to the positive terminal of the battery.
- Connect the communication cable (RJ45) between the sampler and the display module.
- Ensure all connections are secure and insulated.

The coulomb meter is suitable for various applications including electric bicycles, solar power systems, RVs, and electric tricycles.

6. Initial Setup & Calibration
Before first use, it is necessary to correctly set the effective capacity and current remaining battery percentage of the battery. If the effective capacity of the battery is unknown or the current remaining capacity is unknown, follow these steps:
- Fully charge the battery pack.
- Set Preset Battery Capacity: Enter the preset battery capacity setting in the system settings. For example, if the rated capacity of the battery is 150AH, set 150AH as the preset battery capacity. (You can check the rated capacity on the battery nameplate or consult the battery manufacturer).
- Set Remaining Capacity Percentage: Set the remaining capacity percentage to 100%.
- Discharge Battery Pack: Fully discharge the battery pack.
- Calculate Actual Capacity: After discharging, if the remaining capacity value displayed on the monitor is 10AH, and the preset capacity was 150AH, then the actual capacity of the battery is 150AH - 10AH = 140AH. This means the battery has discharged a total of 140AH and cannot be discharged further.
- Final Capacity Setting: Set the actual discharge capacity of the battery (e.g., 140AH) to the preset battery capacity and set the capacity percentage to 0%. This completes the battery setup.
7. Operating Instructions
7.1 Display Interface
The high-definition LCD color screen provides a clear overview of your battery's status. Key parameters displayed include:
- Voltage (V)
- Current (A)
- Power (W)
- Capacity Percentage (%)
- Estimated Charging/Discharging Time
- Remaining Capacity (Ah)

7.2 Monitoring Modes
The meter automatically detects the current direction and displays the appropriate status:
- CHG +: Indicates charging status.
- DIS -: Indicates discharging status.

7.3 Connectivity and Mobile App Control
The KM-F Series supports multiple connectivity options for convenient monitoring:
- Bluetooth Connection: Connect directly to your smartphone via Bluetooth.
- WiFi Connection: Connect to your local WiFi network for remote access.
- Remote Connection: Monitor your battery from anywhere with internet access.
The mobile app allows for complete control and data display, providing real-time information and settings adjustments from your fingertips.


7.4 Display Modes
The display module supports both Dark and Light modes for optimal visibility in different lighting conditions.

7.5 Product Overview Video
8. Maintenance
- Keep the display module and sampler clean and dry. Use a soft, dry cloth for cleaning.
- Avoid using abrasive cleaners or solvents.
- The device features intelligent power-off memory, ensuring no data loss during power outages.

9. Troubleshooting
9.1 Intelligent Alarms
The coulomb meter is equipped with intelligent alarm functions to alert you to critical battery conditions:
- Low Capacity Warning: Alerts when battery capacity falls below a set threshold.
- Low Voltage Warning: Alerts when battery voltage drops below a safe operating level.

9.2 Common Issues
- No Display/Power: Check all power connections and ensure the battery is providing sufficient voltage.
- Incorrect Readings: Verify that the initial setup and calibration steps (Section 6) have been followed correctly. Ensure all wiring is secure and matches the diagram.
- Connectivity Issues (WiFi/Bluetooth): Ensure the device is within range of your WiFi network or Bluetooth device. Check network settings and app permissions.
10. Specifications
| Feature | Description |
|---|---|
| Brand | JUNCTEK |
| Model Numbers | KM105F, KM110F, KM140F, KM160F |
| Type | Vehicle Battery Tester, Coulomb Meter |
| DIY Supplies | Electrical |
| Origin | Mainland China |
| Certification | CE |
| Battery Included | No |
| High-concerned chemical | None |
| Voltage Range | DC 10-100V |
| Current Range (Sampler Dependent) | 0-50A (KM105F), 0-100A (KM110F), 0-400A (KM140F), 0-600A (KM160F) |
| Connectivity | WiFi, Bluetooth, Remote Connection |
| Display | High-definition LCD Color Screen (Dark/Light Modes) |
| Features | Real-time capacity monitoring, Screen inversion, Mobile app control, Power-off memory, Bidirectional current detection, Ultra low power consumption, Low voltage/capacity reminders |
| Package Dimensions (L x W x H) | 30cm x 24cm x 18cm |
| Package Weight | 1.1 kg |

11. User Tips
- Accurate Capacity Setting: The most critical step for accurate readings is the initial calibration of the battery's effective capacity. Always perform a full charge and discharge cycle to determine the true usable capacity of your battery before setting it in the meter. This ensures the percentage display is reliable.
- Regular Checks: Periodically verify your battery's actual capacity, especially for older batteries, as capacity can degrade over time.
- App Connectivity: For the best experience, ensure your mobile device has a stable internet connection when using remote monitoring features.
12. Warranty & Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt and product model number handy for faster assistance.