Aigo ICE600SE CPU Cooler Instruction Manual

1. Introduction

The Aigo ICE600SE is a high-performance tower CPU cooler designed to provide efficient and quiet cooling for your processor. Featuring 6 pure copper heat pipes, a PWM temperature-controlled 120mm fan, and vibrant ARGB lighting, it ensures optimal thermal management while adding aesthetic appeal to your PC build. This manual provides essential information for installation, operation, and maintenance of your ICE600SE CPU cooler.

2. Package Contents

Please verify that all items are present in your package:

• 1 x Aigo ICE600SE CPU Cooler
• 1 x Universal Mounting Bracket Kit
• 1 x Thermal Paste (Note: Thermal paste is only included in packages sent from ES, RU, BR, US warehouses. Packages from China do not contain thermal grease due to airline liquid transport restrictions.)

3. Key Features

• Advanced ARGB Lighting: Features a multicolored aperture design with soft light effects, supporting 16 million colors. Compatible with ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, and ASRock Polychrome RGB software drivers for synchronized lighting.
• Efficient Heat Dissipation: Constructed with aluminum fins and 6 pure copper heat pipes for superior heat transfer and optimized performance.
• PWM Temperature-Controlled Fan: A 120mm fan with ABS material blades and a hydraulic bearing ensures dual-efficiency energy saving, noise reduction, and a long lifespan of approximately 100,000 hours. Fan speed ranges from 800-1600 RPM.
• Memory Compatibility: Heat pipe offset design eliminates memory interference issues, allowing for unrestricted fan installation and quick assembly.
• Robust Construction: Tightly arranged fins prevent deformation, ensuring durability and consistent cooling performance.
• Overclocking Support: Designed to support powerful overclocking cooling, keeping your CPU stable during high-performance tasks.

4. Specifications

5. CPU Socket Compatibility

The Aigo ICE600SE CPU Cooler supports a wide range of Intel and AMD CPU sockets:

• Intel Sockets: LGA 755, LGA 775, LGA 771, LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 1170, LGA 1200, LGA 1366, LGA 1700, LGA 18XX, LGA 2011, LGA 2011-3
• AMD Sockets: AM2, AM2+, AM3, AM3+, AM4, AM5 (Note: AM3, AM4, and AM5 use the same size mounting for this cooler.)

6. Installation Guide

Important Note: The cooler comes with an Intel mounting bracket. AMD motherboards typically come with their own cooler bracket. If your AMD motherboard does not have a cooler bracket, you will need to purchase one separately.

While specific step-by-step diagrams are not provided, the installation process generally follows these steps:

1. Prepare Motherboard: Ensure your motherboard is removed from the PC case or has sufficient access for cooler installation.
2. Install Backplate (if applicable): For Intel sockets, attach the appropriate backplate to the rear of the motherboard, aligning it with the CPU socket holes.
3. Install Mounting Brackets: Secure the correct mounting brackets to the front of the motherboard around the CPU socket, using the provided screws and standoffs.
4. Apply Thermal Paste: Apply a small, pea-sized amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). Do not spread it; the pressure from the cooler will distribute it evenly.
5. Position Cooler: Carefully place the CPU cooler onto the CPU, aligning the mounting holes on the cooler's base with the mounting points on the brackets.
6. Secure Cooler: Use the provided screws or spring-loaded screws to gradually tighten the cooler to the mounting brackets. Tighten in a cross pattern (e.g., top-left, bottom-right, top-right, bottom-left) to ensure even pressure. Do not overtighten.
7. Attach Fan: Secure the 120mm fan to the heatsink using the included fan clips. The fan can be installed without position restrictions due to the heat pipe offset design, which avoids memory interference.
8. Connect Cables: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. If your cooler has ARGB lighting, connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard.
9. Final Check: Double-check all connections and ensure the cooler is securely mounted and stable.

7. Operating Instructions

Once the Aigo ICE600SE CPU Cooler is correctly installed and connected, its operation is largely automatic:

• PWM Fan Control: The 4-pin PWM fan connector allows your motherboard to automatically control the fan speed based on CPU temperature. This ensures optimal cooling performance when needed and quieter operation during lighter loads. You can typically adjust fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
• ARGB Lighting Control: If you have connected the ARGB cable to a compatible motherboard header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome RGB). This allows for synchronization with other ARGB components in your system.

8. Maintenance

Regular maintenance helps ensure optimal performance and longevity of your CPU cooler:

• Dust Removal: Periodically clean dust from the heatsink fins and fan blades. Use compressed air or a soft brush to gently remove accumulated dust. Ensure the fan is not spinning rapidly when using compressed air to prevent damage to the bearings.
• Fan Inspection: Check the fan for any signs of wear, damage, or excessive noise. If the fan becomes noisy or stops spinning, it may need to be replaced.
• Thermal Paste Reapplication: If you remove the CPU cooler for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler's base and apply fresh thermal paste before reinstallation.

9. Troubleshooting

If you encounter issues with your Aigo ICE600SE CPU Cooler, consider the following:

• Fan Not Spinning:
  • Check if the 4-pin PWM fan cable is securely connected to the CPU_FAN header on the motherboard.
  • Ensure the fan is not obstructed by cables or other components.
  • Verify fan settings in your motherboard's BIOS/UEFI.
• ARGB Lighting Not Working:
  • Confirm the ARGB cable is correctly connected to a compatible 3-pin 5V ARGB header on your motherboard.
  • Check your motherboard's RGB software to ensure lighting effects are enabled and configured.
  • Ensure the ARGB header on your motherboard is enabled in BIOS/UEFI.
• High CPU Temperatures:
  • Verify that the cooler is securely mounted to the CPU and making good contact.
  • Ensure sufficient thermal paste was applied correctly.
  • Check for excessive dust buildup on the heatsink fins and fan.
  • Confirm the fan is spinning at an appropriate speed (check in BIOS/UEFI or monitoring software).
• Excessive Noise:
  • Check for loose fan blades or obstructions.
  • Ensure the fan is securely attached to the heatsink.
  • Adjust fan speed settings in your motherboard's BIOS/UEFI to a quieter profile if temperatures allow.

10. User Tips

• For optimal thermal performance, ensure good airflow within your PC case. Proper intake and exhaust fan configuration can significantly impact CPU cooler efficiency.
• When applying thermal paste, a small pea-sized dot in the center of the CPU is generally sufficient. The pressure from the cooler will spread it evenly.
• Regularly monitor your CPU temperatures using software like HWMonitor or Core Temp to ensure your cooler is performing as expected, especially after making changes to your system or during heavy workloads.
• Take advantage of your motherboard's RGB software to customize the ARGB lighting to match your system's aesthetic.

11. Warranty and Support

For warranty claims or technical support, please refer to the retailer or manufacturer's official website where you purchased the Aigo ICE600SE CPU Cooler. Keep your proof of purchase for any warranty-related inquiries.