KAIWEETS KT360A

Contents

KAIWEETS KT360A 3*360 Self Leveling Laser Level User Manual

Model: KT360A

Introduction

This manual provides detailed instructions for the safe and effective use of your KAIWEETS KT360A 3*360 Self Leveling Laser Level. Please read this manual thoroughly before operating the device and keep it for future reference.

The KAIWEETS KT360A is a versatile green laser level designed for various alignment tasks, featuring three 360° laser lines (one horizontal and two vertical) for comprehensive room coverage. It offers automatic self-leveling, extended battery life, and a durable, waterproof design.

Safety Information

WARNING: LASER RADIATION

  • Do not stare directly into the laser beam.
  • Do not intentionally direct the laser beam at others.
  • Avoid using optical instruments (e.g., binoculars, telescopes) to view the laser beam.
  • Ensure the laser level is used in a safe environment, away from children.
  • This device is a Class II laser product.

The KT360A complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007, and IEC 60825-1:2014.

Rear view of the KAIWEETS KT360A laser level showing a caution label for multiple line laser and compliance information.
Figure 1: Caution Label and Compliance Information

Package Contents

Upon unpacking, please verify that all items listed below are present and in good condition:

  • 1 x Self Leveling Laser Level (KT360A)
  • 1 x Rechargeable Lithium Battery
  • 1 x Type-C Charge Cable
  • 1 x Power Adapter
  • 1 x Magnetic Pivoting Base
  • 1 x Laser Target Plate
  • 1 x Fabric Bag
  • 1 x User Manual (this document)
KAIWEETS KT360A package contents including laser level, battery, cables, adapter, magnetic base, target plate, fabric bag, and user manual.
Figure 2: KAIWEETS KT360A Package Contents

Setup

1. Battery Installation and Charging

  1. Locate the battery compartment on the device.
  2. Insert the provided 3.7V, 7.5Ah lithium-ion rechargeable battery, ensuring correct polarity.
  3. To charge the battery, connect the Type-C charge cable to the laser level and the power adapter, then plug the adapter into a power outlet. The battery indicator lights will show charging status.
  4. A full charge provides approximately 18 hours of continuous operation, with up to 40 hours possible depending on usage and laser line activation.
Comparison image showing KAIWEETS Li-on Battery with up to 40 hours battery life versus an ordinary manufacturer battery with up to 6 hours battery life.
Figure 3: KAIWEETS KT360A Extended Battery Life

2. Mounting the Laser Level

The KT360A offers flexible mounting options:

  • Magnetic Pivoting Base: Attach the laser level to the magnetic pivoting base. This base can then be securely mounted to metallic surfaces or used for fine adjustments.
  • Tripod Mounting: The device features 1/4" and 1/8" mounting threads, allowing it to be attached to standard tripods for stable positioning and height adjustment.
Three images showing different mounting methods for the KAIWEETS KT360A: magnetic mount, 360-degree rotation on a base, and tripod mount.
Figure 4: Mounting Options (Magnetic, 360° Rotation, Tripod)

Operating Instructions

1. Power On/Off and Mode Selection

  1. To power on the device, slide the main switch to the "ON" position. The laser level will automatically enter self-leveling mode.
  2. Press the power button (often labeled with a power symbol or 'H'/'V' for horizontal/vertical) to cycle through different laser line combinations (e.g., horizontal only, vertical only, all lines).
  3. To switch between self-leveling mode and manual/tilt mode, press and hold the appropriate button (refer to control panel diagram).
  4. To power off, slide the main switch to the "OFF" position.
Close-up of the KAIWEETS KT360A control panel showing icons for laser line selection and pulse mode activation.
Figure 5: Control Panel Overview

2. Self-Leveling Mode

  • When powered on, the device automatically self-levels within ±4 degrees.
  • If the device is outside its self-leveling range, the laser lines will flash rapidly, indicating it needs to be adjusted to a more level surface.
  • Once leveled, the laser lines will emit a steady beam, providing an accuracy of ±0.3mm/m.

3. Manual/Tilt Mode

  • To activate manual mode, typically press and hold the power/mode button while the device is locked (pendulum locked). The laser lines will remain on but will not self-level, allowing for projection of lines at any angle.
  • A lock icon on the device or control panel usually indicates manual mode.
KAIWEETS KT360A laser level in manual mode, projecting angled cross lines on a staircase, indicated by a lock icon.
Figure 6: Manual Mode Operation

4. Pulse Mode (Receiver Mode)

  • Press the pulse mode button (often indicated by a 'P' or receiver icon) to activate pulse mode.
  • In pulse mode, the laser level can be used with an optional laser receiver (not included) to extend the working range up to 196ft/60m, especially in bright outdoor conditions.
  • This mode maintains full brightness of the laser lines for detection by the receiver.
KAIWEETS KT360A laser level projecting a green line across a large room, with a laser receiver shown in the distance, illustrating a large working range of 197ft.
Figure 7: Extended Working Range with Receiver

5. Laser Line Configurations

The KT360A provides three 360° green laser lines:

  • One 360° Horizontal Line
  • Two 360° Vertical Lines
  • These can be activated individually or in combination to suit various applications like picture hanging, tiling, or ceiling installation.
Four panels demonstrating different laser line configurations: 360 degree horizontal and vertical lines, 360 degree vertical line, three 360 degree vertical lines, and 360 degree horizontal line.
Figure 8: Laser Line Applications

Maintenance

  • Cleaning: Regularly clean the laser windows and housing with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: When not in use, store the laser level in its fabric bag in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
  • Battery Care: For optimal battery life, charge the lithium-ion battery regularly and avoid complete discharge. If storing for extended periods, charge the battery to approximately 50% every few months.
  • Calibration: If you suspect the laser level is out of calibration, refer to the troubleshooting section or contact customer support.

Troubleshooting

ProblemPossible CauseSolution
Laser lines are flashing rapidly.Device is outside its self-leveling range (±4°).Place the laser level on a more level surface.
Laser lines are dim or not visible outdoors.Bright ambient light conditions.Activate pulse mode and use with an optional laser receiver for extended range and visibility.
Device does not power on.Battery is discharged or incorrectly installed.Charge the battery or ensure it is correctly inserted.
Laser lines are not level in manual mode.Manual mode is designed for angled projection and does not self-level.This is expected behavior. For level lines, ensure the device is in self-leveling mode and on a stable surface.

Specifications

CategoryDetail
BrandKAIWEETS
TypeLaser Level
ModelKT360A
ColorBlack + Yellow
Laser ColorGreen
Number of Lines3*360 Degree Laser Lines
Self-Leveling Range±4°
Working Range98ft/30m
Working with Receiver (Not Included)196ft/60m
Leveling Accuracy±0.3mm/m
Power Supply1*Lithium Battery (3.7V, 7.5Ah)
Working Time18H (up to 40H with Lithium Batteries)
Mounting Thread1/4" or 1/8"
Laser ClassClass II
Product Weight1.94kg
Package Weight1.94kg
Package Size (L x W x H)27.9 x 21.7 x 16.4cm
DurabilityIP54 Waterproof and Dustproof

User Tips

  • For precise alignment over long distances or in bright conditions, always use the pulse mode with a compatible laser receiver.
  • When working on sloped surfaces, utilize the manual/tilt mode to project non-level lines accurately.
  • Ensure the pendulum lock is engaged when transporting the device to protect the internal components.
  • The magnetic pivoting base is ideal for quick adjustments and attaching to metal studs or frames.

Warranty and Support

The KAIWEETS KT360A Laser Level comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact KAIWEETS customer service through their official website or the retailer where the product was purchased.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.