Introduction
The XTOOL D5S is a cost-effective and advanced diagnostic scan tool designed for both DIY users and professional mechanics. It offers comprehensive system diagnostics, a wide range of special functions, full OBD2 capabilities, and lifetime free updates to ensure your vehicle maintenance and repair tasks are made easier and more efficient.

1. Setup Guide
1.1. Initial Activation
- Activate the device using your email address and the provided serial number.
1.2. Language Setting
The device defaults to English. To switch to another supported language:
- Send the serial number of your device to customer service to authorize the desired language.
- Once authorized, navigate to settings on the device.
- Select and switch to your preferred language.
- Click 'Update Device' to apply the language change.
1.3. Software Update
The XTOOL D5S supports one-click WiFi updates for its software. Ensure your device is connected to a stable Wi-Fi network to download the latest features, car models, and performance enhancements.

2. Operating Instructions
2.1. 5 System Diagnostics
The D5S diagnostic tool provides comprehensive diagnostics for the following five major vehicle systems:
- Engine System: Read and clear engine fault codes, view live data, and retrieve ECU information.
- Transmission System: Diagnose issues related to the vehicle's transmission, including fault codes and live data.
- ABS System (Anti-lock Braking System): Access ABS fault codes, live data, and perform ABS bleeding functions.
- SRS System (Supplemental Restraint System / Airbag): Diagnose airbag system issues, read/clear codes, and perform SAS calibration.
- EPB System (Electronic Parking Brake): Perform EPB resets and diagnose related issues.
This allows you to easily read and clear fault codes, access live data, read ECU information, and review freeze frame data to pinpoint troubleshooting procedures.

2.2. 16+ Special Functions
The XTOOL D5S offers over 16 commonly used special functions to assist with routine car maintenance:
- Oil Light Reset: Resets the service and oil light after an oil change.
- EPB Reset: Resets calipers, brake discs, or pads after electronic parking brake system repair/replacement.
- ABS Bleeding: Cycles the ABS pump to bleed air from the ABS system, restoring braking sensitivity.
- Injector Coding: Writes new injector codes into the ECU to correct cylinder injection quantity.
- TPMS Reset: Performs tire pressure reset after tire or sensor replacement, or when tire pressure is insufficient.
- DPF Reset: Clears blockages in the DPF filter to meet emission standards.
- Throttle Relearn: Re-learns and adapts throttle sensor position after clearing or repairing the electronic throttle.
- SAS Calibration: Resets airbag data after replacing the airbag.
- BMS Reset: Resets the car battery monitoring unit after replacement.
- Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet for accurate engine misfire diagnosis.
- Control Unit Reset: Restores vehicle's electronic control unit (ECU) parameters to factory defaults.
- Additional Functions: Includes Gearbox Match, Suspension, Headlight, Windows Initialization, EGR Relearn, Crank Sensor Relearn, and more.
Note: Special functions are not applicable to all cars. Please provide your car model and VIN to customer service to check compatibility before attempting these functions.

2.3. Full OBD2 Functions
The D5S provides all 10 modes of OBD2 functions for comprehensive emission-related diagnostics:
- Read Fault Codes: Displays Diagnostic Trouble Codes (DTCs).
- Clear Fault Codes: Clears DTCs and turns off the Check Engine Light.
- View Live Data Streams: Shows real-time data from vehicle sensors in graph format.
- Review Freeze Frame Data: Displays a snapshot of operating conditions at the time of an emission-related fault.
- Check I/M Readiness Status: Indicates whether the various emission-related systems on the vehicle are operating correctly and are ready for inspection and maintenance testing.
- Display Oxygen Sensor Test Results: Retrieves O2 sensor monitor test results.
- Request On-Board Monitoring Test Results: Accesses results for specific monitored systems.
- Built-in DTC Lookup Library: Provides definitions and cause analysis for DTCs.
- Control Special Mode Requests for EVAP Tests: Initiates a leak test for the vehicle's EVAP system.
- Retrieve Vehicle Information: Displays the vehicle's VIN, calibration ID, and calibration verification number.

2.4. 4-in-1 Live Data Stream Graphing
The D5S allows you to select and display up to 4 pieces of data simultaneously in a graph format. This feature provides intuitive diagnostics and helps monitor vehicle performance, making it easier to analyze abnormal parameters.
- Data View: View live data graphs of previously exported streams on the device.
- Live Data Record & Playback: Record and play back live data streams to troubleshoot vehicle issues.
- Data Export: Export live data into CSV files for viewing on a computer via USB cable.

2.5. Auto VIN & Auto Scan
The Auto VIN & Auto Scan function automatically retrieves the vehicle identification number (VIN) and performs a comprehensive scan of all available systems for quick diagnostics.
Note: Auto VIN may not work on all vehicles. In such cases, you can use the 'Manual Input' option to enter the VIN number and access the vehicle menu.
2.6. CAN FD & FCA AutoAuth Support
- CAN FD Protocol: The D5S supports the CAN FD protocol, enabling faster data transfer and diagnostic efficiency for newer vehicles, especially GM models after 2020, without requiring extra CAN FD cables.
- FCA AutoAuth: The diagnostic scanner provides secure access to FCA vehicles (Chrysler, Jeep, Dodge 2018 and later). You can directly log into your FCA account to perform diagnostic functions like clearing DTCs, bi-directional tests, and calibrations without gateway limitations.
2.7. Multilingual Support
The XTOOL D5S supports over 15 languages, including English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Turkish, and Traditional Chinese. This allows users worldwide to operate the device without language barriers.

2.8. DTC Lookup
The built-in DTC Lookup feature simplifies car diagnostics by allowing you to quickly identify potential issues with your vehicle by providing definitions and cause analysis for Diagnostic Trouble Codes.
3. Maintenance
3.1. Software Updates
The XTOOL D5S comes with lifetime free updates. Monthly WiFi updates are released to add new features, expand vehicle coverage, introduce new languages, and improve overall performance. Regularly check for and install updates to ensure optimal functionality.
3.2. Battery Charging
The device is equipped with a 3150mAh 3.6V battery and supports Type-C charging. Use the provided charging cable and a compatible adapter to charge the device. Ensure the device is fully charged before extended use.
3.3. General Care
- Keep the device clean and free from dust and debris.
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid dropping the device or subjecting it to strong impacts.
4. Troubleshooting
4.1. Special Functions Not Working
If a special function does not work for your vehicle, it might be due to compatibility issues. Special functions are not universally applicable to all car models. Please contact XTOOL customer service with your car model and VIN to verify compatibility before attempting the function.
4.2. Auto VIN Failure
If the Auto VIN function fails to automatically retrieve your vehicle's VIN, you can manually input the VIN number into the device to proceed with diagnostics.
4.3. Language Change Issues
If you encounter issues changing the device language, ensure you have sent your device's serial number (S/N) to XTOOL customer service for language authorization. Once authorized, follow the steps in Section 1.2 to switch the language and update the device.
4.4. General Device Issues
For any other issues or technical difficulties, please contact XTOOL customer service. They offer 24-hour service and technical support to assist you.
5. Specifications
| Feature | Specification |
|---|---|
| Model Name | XTOOL D5S |
| Operating System | Linux System |
| Processor | 2 Core 1.2GHZ |
| Memory | 128M RAM + 32GB ROM |
| LCD Screen | 5.45-inch Touch Screen with 1440x720 Resolution |
| Battery | 3150mAh 3.6V |
| Charging | Type-C Charge |
| Software Update | One Click with WiFi Online Update (Lifetime Free) |
| Supported Languages | 15+ Languages (English, Spanish, German, French, Italian, Finnish, Arabic, Japanese, Korean, Polish, Portuguese, Vietnamese, Russian, Turkish, Traditional Chinese) |
| Hardware Version | 2025 |
| Software Version | Latest |
| Item Weight | 800g |
| Item Dimensions (L x W x H) | 25cm x 15cm x 3cm |
| Voltage | 3.6V |
| Material | Plastic |
| Certifications | CE, External Testing Certification: ce |
| Origin | Mainland China |
| Supported Protocols | CAN, CAN FD |
| Special Support | FCA AutoAuth |
6. Warranty and Support
6.1. Warranty Information
The XTOOL D5S comes with a 2-year warranty from the date of purchase, ensuring peace of mind for your investment.
6.2. Lifetime Free Updates
Enjoy lifetime free updates for your device. These updates continuously add new features, expand vehicle compatibility, and improve overall diagnostic performance.
6.3. Technical Support
XTOOL provides professional technical support to assist you with any issues or questions you may have. They offer online technical support and aim to reply within 24 hours.
6.4. Contact Information
- XTOOL Function Query Website: https://www.xtoolonline.com
- WhatsApp Support: +86 15815146451

7. User Tips
- Check Compatibility: Before purchasing or attempting specific special functions, always verify compatibility with your vehicle model and VIN by contacting customer service.
- Manual VIN Input: If the automatic VIN detection fails, remember to use the manual input option to enter your vehicle's VIN.
- Language Authorization: For languages other than English, ensure you send your device's serial number to customer service for authorization before attempting to switch languages.
- Stay Updated: Regularly connect your device to Wi-Fi and perform one-click updates to benefit from the latest features and vehicle coverage.