Important Safety Warnings
Please read all warnings and instructions carefully before operating this aircraft. Failure to do so may result in injury or damage.
- Keep packaging and instructions for future reference.
- You are responsible for ensuring no harm is caused to persons or property.
- Maintain a distance of 2-3m between the aircraft and users/bystanders during operation to prevent injury.
- Do not operate if under 14 years old without adult supervision.
- Assemble parts as instructed; some parts require adult assembly.
- Product contains small parts; keep out of reach of children to prevent choking.
- Avoid operating on roads or near water.
- Do not disassemble or modify the aircraft.
- Use only the provided 5V=2A charging cable.
- Charge rechargeable batteries under adult supervision, away from flammable materials.
- Do not short-circuit, squeeze, decompose, or throw batteries into fire or high heat.
- Keep a safe distance from high-speed rotating propellers to avoid injury.
- Motors can become hot; avoid touching them immediately after use.
- LEDs emit laser radiation; do not direct light beams at others.
- Do not use near ears to prevent hearing damage.
- Stop model remote control in city areas as required by aeronautical radio station regulations.
- After use, turn off the aircraft, unplug the battery, and allow 30 minutes of rest before recharging to prevent battery damage.
Introduction
The 4DRC V8 is a compact and versatile WIFI FPV drone designed for beginners and enthusiasts. It features a 4K HD camera, altitude hold mode, headless mode, and multiple control options including remote control, APP control, and gesture control. Its foldable design makes it portable and easy to carry.
Video: 4DRC V8 Drone product demonstration showcasing flight features and control modes.
1. Setup
1.1 Package Contents
Ensure all items are present in your package:
- Aircraft ×1
- USB charging cable ×1
- Fan blade ×4 (spare)
- Lithium battery ×1 (additional batteries may be included depending on package)
- Fan blade replacement tool ×1
- Screwdriver ×1
- Instructions Manual ×1
- Remote Control ×1
- Protection Cover ×4
1.2 Aircraft Components
Familiarize yourself with the parts of your drone:

Image: Diagram showing the drone's components including Power switch, Fan blade, Safety guard, Motor, Camera, Battery, Shell, and LED lights.
1.3 Fan Blade Installation
- Use the provided fan blade replacement tool to carefully remove existing blades if needed.
- Match the new fan blades according to their markings: A1/A2 blades go to positions A1/A2, and B1/B2 blades go to positions B1/B2. Incorrect installation will prevent flight.
- Ensure blades are securely attached.
1.4 Remote Control Battery Installation
- Remove the battery cover on the back of the remote control.
- Insert 3 x AAA batteries (not included) according to the polarity markings inside the compartment.
- Replace the battery cover.
1.5 Lithium Battery Charging
- Remove the lithium battery from the aircraft by unbuckling the battery lock.
- Connect the USB charging cable to the battery.
- Plug the USB end of the cable into a 5V=2A power adapter or a computer USB port.
- The red light on the aircraft (or charging cable) will turn off during charging and will illuminate steadily when charging is complete.
Warning: Only use the charging cable provided by the factory. Do not use other charging cables.
1.6 Mobile Phone Holder Installation
Attach your mobile phone to the remote control's holder as shown in the diagram in the manual (refer to page 4, section 4).
1.7 APP Download and Installation
- For Android: Scan the QR code provided in the manual (page 11) to download the '4D FLY APP'.
- For iOS: Scan the QR code provided in the manual (page 11) to download the '4D FLY APP' from the App Store.
1.8 Pre-Flight Preparation (Remote Control)
- Turn on the aircraft power and place it on a horizontal surface. The front blue and red lights will flash, indicating frequency matching mode. Ensure the aircraft's nose faces forward.
- Press and hold the power switch button on the remote control. The power indicator will turn on.
- Push the throttle lever (left joystick) all the way up, then all the way down. The aircraft lights will stop flashing and remain steady, indicating successful code-matching.
- Horizontal Calibration: Long press the calibration key on the remote control. The LED lights on the aircraft will flash, then become steady. The remote control will emit a 'beep' sound, indicating calibration is complete. This must be done on a horizontal surface.
1.9 Pre-Flight Preparation (APP Control)
- Turn on the aircraft power and place it on a horizontal surface. The front blue and red lights will flash.
- On your mobile device, enable Wi-Fi and connect to the network named "4DRC-4K-********".
- Open the '4D FLY APP'. Tap 'OFF', then turn on the touch rocker. Tap the connect icon. The aircraft lights will turn on normally, indicating successful frequency matching.
- Horizontal Calibration: In the APP interface, tap the 'correction' icon. The LED lights on the aircraft will flash and then become steady, indicating calibration is complete. This must be done on a horizontal surface.
1.10 Environmental Requirements for Flight
- Fly in an outdoor open environment without rain or snow, and with wind power less than 3.
- Stay away from people, trees, wires, tall buildings, airports, and signal transmission towers.
2. Operating Instructions
2.1 Remote Control Layout

Image: Diagram showing the layout of the remote control with labels for each button and joystick function.
- Left Joystick (Throttle/Rudder): Up/Down (Ascend/Descend), Left/Right (Turn Left/Right).
- Right Joystick (Aileron/Elevator): Up/Down (Forward/Backward), Left/Right (Fly Left/Right).
- Speed Control: Adjust flight speed (Low, Medium, High).
- One-Key Take-off/Landing: Initiates automatic take-off or landing.
- Headless Mode: Activates headless flight.
- One-Key Return: Initiates automatic return to the take-off point.
- 360° Roll: Performs aerial flips.
- Fine-Tuning Buttons: Adjust for drift in forward/backward or left/right flight.
- Emergency Stop: Immediately stops motors (short press).
- One-Key Calibration: Calibrates gyroscope (long press).
2.2 One-Key Take-off and Landing
- After code-matching and calibration, press the One-Key Take-off/Landing button. The drone will automatically ascend to about 1 meter and hover.
- Press the button again to initiate automatic landing.
2.3 Basic Flight Controls
- Ascend/Descend: Push the left joystick up/down.
- Turn Left/Right: Push the left joystick left/right.
- Fly Forward/Backward: Push the right joystick up/down.
- Fly Left/Right (Sideways): Push the right joystick left/right.
2.4 360° Roll (Flips)
Ensure the drone is at least 1.5 meters above the ground. Press the 360° Roll button, then push the right joystick in the desired direction (left, right, forward, or backward) to perform a flip.
2.5 Headless Mode
- After code-matching, the drone's front is set as the default front in headless mode.
- Short press the Headless Mode button to activate. In this mode, the drone's orientation is relative to the pilot, regardless of its actual nose direction.
- Short press again to exit.
2.6 One-Key Return
- During flight, press and hold the One-Key Return button. The remote control will beep, and the drone will attempt to return to its take-off point.
- Any joystick input will cancel the return function.
2.7 Speed Switching
The drone defaults to low speed. Gently press the Speed Switch button to cycle through low (1 beep), medium (2 beeps), and high (3 beeps) speeds.
2.8 Fine-Tuning
If the drone drifts during flight, use the fine-tuning buttons to correct its movement:
- If drifting backward, press the forward fine-tuning button.
- If drifting forward, press the backward fine-tuning button.
- If drifting right, press the left fine-tuning button.
- If drifting left, press the right fine-tuning button.
2.9 Induction Mode & Inductive Roll
- Press the remote control/induction switch button to enter induction mode. The drone can then be controlled by hand gestures (e.g., moving hand below to make it ascend). Keep your palm about 10cm from the aircraft.
- To perform an inductive roll, place both hands on the left and right inductive heads. After two seconds of induction, the aircraft will automatically roll 360°.
2.10 Stop Flight & Throw Flight Mode
- Stop Flight: To stop the drone mid-air, simply take the aircraft and turn it upside down.
- Throw Flight Mode: Turn on the drone, place it on a horizontal surface. If no remote control frequency matching occurs within 3 seconds, hold the aircraft, stretch it forward, wait for blue and red lights to flash slowly, then throw it upward or swing your hand downward. The aircraft will automatically take off.
2.11 APP Control Functions

Image: Screenshot of the 4D FLY APP interface showing various control options and settings.
- Media Library: Access photos and videos.
- Record Video/Take Pictures: Capture aerial footage.
- Fixed Height Mode: Maintain a stable altitude.
- Gravity Sensor Control: Control flight by tilting your phone.
- Menu: Access various settings.
- VR Mode: Experience immersive flight with VR glasses.
- Lighting Control: Turn drone lights on/off.
- Headless Mode: Activate headless flight via APP.
- Calibrated Gyroscope: Perform gyroscope calibration.
- Orbit Flight: Draw a flight path on the screen, and the drone will follow it automatically.
- Gesture Recognition: Use specific hand gestures (OK gesture for photo, V gesture for video) in front of the camera to trigger photo or video recording. Ensure you are 2-3 meters away in good lighting.
3. Maintenance
3.1 General Care
- Keep the drone clean and free from dust and debris.
- Avoid exposing the drone to extreme temperatures or direct sunlight for prolonged periods.
- Do not disassemble or modify the aircraft, as this can cause malfunction and void the warranty.
- Store the drone in its original packaging or a protective case when not in use.
3.2 Battery Care
- Always disconnect the battery from the drone when not in use.
- Do not overcharge or over-discharge the battery.
- Charge the battery only with the provided USB charging cable.
- Allow the battery to cool down for at least 30 minutes after use before recharging.
- Store batteries in a cool, dry place.
4. Troubleshooting
| Problem | Reason | Solution |
|---|---|---|
| Aircraft indicator flashes, no response | Insufficient power | Charge the battery |
| Blades rotate but cannot fly | 1. Low battery 2. Blade deformation | 1. Charge the battery 2. Replace the blade |
| Aircraft vibrates badly | Blade deformation | Replace the blade |
| Fine-tuning done but aircraft still unstable | 1. Blade deformation 2. Defective motor | 1. Replace the blade 2. Replace the motor |
| After impact, aircraft flies uncontrollably | Three-axis acceleration sensor loses balance | Leave aircraft stationary for 5-10 seconds, or correct by re-calibrating level |
5. Specifications

Image: Diagram showing detailed product parameters and dimensions.
| Feature | Specification |
|---|---|
| Model Number | 4D-V8 |
| Material | ABS plastic and electronic components |
| Color Options | Black/Orange/Blue/Grey |
| Gyro | 6-axis |
| Frequency | 2.4G |
| Control Channels | 4 channels |
| Motor | 716 Brushed Coreless Motor |
| Drone Battery | 3.7V 650MAH Lipo Battery (Modular) |
| Controller Battery | 3 x 1.5 AAA Battery (not included) |
| Flight Time | About 11-15 minutes |
| Charging Time | 40 minutes |
| RC Distance | 50-80m (Remote Control) / About 100 meters (Image Transmission) |
| FPV Distance | 30-50m |
| FPV Type | WiFi |
| Video Capture Resolution | 1080p FHD, 4K UHD (Optional) |
| Camera Pixels | 5 million HD pixels (for 4K version) |
| Camera Angle | Fixed at 25° |
| Quadcopter Size (Unfolded) | 13 x 11 x 4 cm |
| Drone Weight | About 32g |
| Takeoff Weight | About 55g |
| Operator Skill Level | Beginner |
| Indoor/Outdoor Use | Indoor-Outdoor |
| FCC ID | 2A4E2-4D-F10 |
6. User Tips
- Battery Life: The battery typically lasts for 5-7 minutes of flight. Consider purchasing additional batteries for extended flight sessions.
- Charging: Always allow the battery to cool down after flight before recharging to prolong its lifespan.
- Storage: The included briefcase is useful for storing the drone and all its accessories securely.
- Manuals: If you require the manual in another language, please check the official product page or contact support.
7. Warranty and Support
7.1 Warranty Information
This product comes with a 15-day warranty from the date of purchase. Please retain your proof of purchase for any warranty claims. The warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, unauthorized modifications, or improper operation.
7.2 Customer Support
For further assistance, troubleshooting, or warranty claims, please contact the seller or the official 4DRC customer support channel. Refer to the original product packaging or seller's website for contact details.
You can also refer to the full PDF user manual for more detailed instructions and diagrams: View PDF User Manual