Honest Feipeng 1# Cigar Lighter

Contents

Honest Feipeng 1# Cigar Lighter Instruction Manual

Model: Feipeng 1#

Introduction

Thank you for choosing the Honest Feipeng 1# Cigar Lighter. This versatile and robust lighter is designed for cigar enthusiasts, featuring a powerful double jet flame, an integrated V-cut cigar cutter, and a convenient cigar holder stand. Its windproof design ensures reliable ignition in various conditions, and it is easily refillable with butane gas. Please read this manual carefully to ensure safe and optimal use of your new lighter.

Honest cigar lighter with double jet flame ignited, held in hand.
The Honest Feipeng 1# Cigar Lighter in action, demonstrating its powerful double jet flame.

Setup

Butane Refilling Instructions

Your lighter is shipped without butane gas due to air transportation restrictions. Please follow these steps to refill your lighter:

  1. Ensure the lighter is turned upside down.
  2. Insert the nozzle of a 4MPa pressure butane gas canister into the refill valve at the bottom of the lighter.
  3. Press down firmly to fill. Repeat short presses if necessary until the tank is full.
  4. After refilling, wait for 5-10 minutes to allow the gas to stabilize in the lighter before attempting to use it. This helps prevent inconsistent flames and ensures proper ignition.

Warning: Use only 4MPa pressure butane gas when refilling. Using incorrect gas pressure or type may damage the lighter or cause malfunction.

Diagram showing the steps to refill the butane lighter.
Visual guide for refilling the lighter with butane gas.

Operating Instructions

Ignition

To ignite the lighter, simply press the ignition button. The double jet flame will activate, providing a strong and windproof flame for lighting cigars.

Hand igniting the lighter with a press-type mechanism.
The press-type ignition mechanism for easy lighting.

Flame Adjustment

The flame size can be adjusted using the screw located at the bottom of the lighter. Rotate the screw left or right to increase or decrease the flame intensity according to your preference.

Close-up of the lighter's bottom, showing the flame adjustment screw.
The flame adjustment screw located at the base of the lighter.

Using the V-Cut Cigar Cutter

The lighter features an integrated V-cut cigar cutter with a stainless steel blade, suitable for cigars up to 24mm in diameter. To use:

  1. Locate the V-cut opening on the side of the lighter.
  2. Insert the cap of your cigar into the V-cut opening.
  3. Push the cigar firmly and smoothly to make a clean V-cut.
Hand demonstrating the use of the V-cut cigar cutter on the lighter.
Using the integrated V-cut cigar cutter for a precise cut.

Using the Cigar Holder Stand

The top cap of the lighter doubles as a convenient cigar holder stand. Simply open the top cap and rest your cigar on it when not in use.

Honest cigar lighter with a cigar resting on its open top cap, demonstrating the cigar holder function.
The lighter's top cap serves as a practical cigar holder stand.

Maintenance

  • Refilling: Always use high-quality butane gas for optimal performance and longevity of your lighter. Refer to the 'Butane Refilling Instructions' in the Setup section.
  • Cleaning: Keep the lighter clean and free from dust and debris. Use a soft, dry cloth to wipe the exterior. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the lighter in a cool, dry place, away from direct sunlight, extreme temperatures, and open flames. Ensure it is out of reach of children.

Troubleshooting

  • No Flame or Weak Flame:
    • Check butane fuel level. Refill if necessary.
    • Purge any air from the fuel tank. Hold the lighter upside down and press the refill valve with a small tool until no more gas escapes. Then, refill.
    • Adjust the flame height using the screw at the bottom.
  • Inconsistent Flame:
    • This can often be resolved by purging the air from the tank and refilling with fresh butane.
    • Ensure you are using high-quality butane.
  • Cutter Not Working Smoothly:
    • Ensure the cutter mechanism is free of debris. Clean gently if needed.

If problems persist after following these steps, please contact customer support.

Specifications

FeatureSpecification
BrandHonest
ModelFeipeng 1#
MaterialZinc Alloy
Dimensions (L x W x H)86mm x 40mm x 21mm
Net WeightApprox. 97g
Gas CapacityApprox. 2.75g
Flame TypeDouble Jet Flame (Windproof)
Cigar Cutter TypeV-Cut, Stainless Steel Blade
Cutter DiameterUp to 24mm
Fuel TypeButane Gas (4MPa pressure recommended)
Available ColorsBlack, Wood
Product parameters table in Chinese, showing brand, model, material, dimensions, weight, and gas capacity.
Detailed product parameters and dimensions.

User Tips

  • Always use high-quality, refined butane gas to prevent clogging and ensure consistent flame performance.
  • When refilling, ensure the lighter and gas canister are at room temperature for best results.
  • Avoid overfilling the lighter; stop when you see gas escaping from the valve.
  • Keep the lighter away from extreme heat or prolonged direct sunlight, as this can cause pressure buildup.

Warranty and Support

For any questions, concerns, or support needs regarding your Honest Feipeng 1# Cigar Lighter, please contact the seller or retailer from whom you purchased the product. They will be able to assist you with troubleshooting, warranty claims, or any other product-related inquiries.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.