Yovanxer TJ7500

Contents

Yovanxer TJ7500 Electric Screen Controller Instruction Manual

Model: TJ7500 | Brand: Yovanxer

Introduction

This Yovanxer TJ7500 RF Remote Controller is designed for electric screen and curtain systems, offering forward, reverse, and stop capabilities. It allows control of the motor from a distance, with wireless signals capable of passing through walls, floors, and doors. This intelligent learning type receiver can be paired with multiple remote controls and is suitable for various applications including electric projection screens, electric curtains, electric pylons, garage doors, and retractable doors.

Please read this instruction manual thoroughly before operating the device to ensure safe and correct usage.

Product Features

  • Advanced Technology: Features imported chips, advanced technology, reasonable design, and an aesthetically pleasing appearance.
  • Safety and Reliability: Includes overpressure protection and lightning protection design for safe and reliable operation.
  • Long-Distance RF Control: Designed for long-distance radiofrequency emission, allowing control unobstructed by walls, floors, and doors.
  • Easy Operation: Simple and convenient remote control operation.
  • Intelligent Learning Receiver: The receiver is an intelligent learning type, allowing easy setup and pairing with multiple remote control handles.
  • Wide Voltage Input: Operates with AC85V-265V voltage input (other specifications customizable).
  • Versatile Application: Primarily used for controlling electric projector screens, electric curtains, electric pylons, garage doors, extendable doors, and pumps.
  • High Confidentiality: Offers high confidentiality, large storage capacity, stable performance, and low power consumption.
  • Dual Control: Fully compatible with both remote control and manual control.

Specifications

AttributeValue
Brand NameYovanxer
Model NumberTJ7500
Operating VoltageAC 85V-265V
Load Power≤500W
Operating Frequency315MHz, 433MHz (Optional)
Control Distance50-100m (open space)
Control Current3A
Wireless CommunicationRF
Channel1
UseProjectors
Operating Temperature-25°C ~ +85°C
Receiver Size100 x 60 x 30mm
Receiver Weight91g
Transmitter Size120 x 45 x 15mm
Transmitter Weight42g
Transmitter Batteries23A / 12V (Not Included)

Package Contents

The standard package includes:

  • 1 x Receiver
  • 1 x Transmitter
  • 1 x Transmitter Holder

Packaging box for the Yovanxer TJ7500 electric screen controller components.Figure: Packaging box for the Yovanxer TJ7500 electric screen controller.

Setup

1. Physical Installation and Wiring

WARNING: Before installation, ensure the power is OFF to prevent electric shock. Installation should be performed by qualified personnel.

  1. Verify the voltage matches the product specifications (AC85-265V).
  2. Connect the wiring according to the diagram provided on the receiver panel.
  3. Ensure all wire connectors are properly insulated and not exposed to prevent short circuits.

Wiring diagram and installation dimensions for the TJ7500 electric screen controller.Figure: Wiring diagram and installation dimensions for the TJ7500 electric screen controller.

Internal wiring diagram of the TJ7500 receiver showing connections for motor rising line, motor center line, motor decline line, and power input.Figure: Internal wiring diagram of the TJ7500 receiver.

Detailed internal wiring of the TJ7500 receiver with labels for motor rising line, motor center line, motor decline line, and power input.Figure: Detailed internal wiring of the TJ7500 receiver.

To access the internal wiring, gently open the receiver casing as shown in the images below:

Hands opening the TJ7500 receiver casing to reveal the circuit board.Figure: Opening the receiver casing.

Internal view of the TJ7500 receiver with the circuit board exposed.Figure: Internal view of the receiver.

2. Remote Control Pairing (Code Setup)

To pair a new remote control with the receiver:

  1. Ensure the receiver is in standby mode (red light on, motor not rotating).
  2. Press and hold the "STOP" button on the receiver for 3 seconds. The red light will turn off.
  3. Immediately press any button on the remote control. The red light on the receiver will flash once and then stay on, indicating successful pairing. The remote control is now ready for use.

Diagram illustrating the code setup process for the remote control.Figure: Remote control code setup diagram.

Operating Instructions

The remote control features three buttons: Up (▲), Stop (■), and Down (▼).

  • Press the Up (▲) button to raise the screen/curtain.
  • Press the Down (▼) button to lower the screen/curtain.
  • Press the Stop (■) button to halt the screen/curtain at any desired position.

Projector Trigger Function

The TJ7500 controller can be used with a projector trigger for automatic screen operation. When the projector is turned on, the screen will automatically close. When the projector is turned off, the screen will automatically open.

Diagram showing how to connect the projector trigger to the projector.Figure: Projector trigger connection.

Watch the video below for a demonstration of the projector trigger function:

Video: Demonstration of the projector trigger automatically opening and closing the screen with the projector.

Maintenance

  • Do not install or store the receiver in hot or humid places.
  • Regularly check the remote control battery (23A / 12V) and replace it if the remote distance shortens or it stops responding.

Troubleshooting

ProblemPossible Cause / Solution
Motor not working after installationConfirm that the motor center line is connected correctly. If the issue persists, consult your supplier.
Motor running in the wrong directionExchange the ascending (rising) and descending (decline) wires.
Remote control distance shortened or unresponsiveReplace the remote control battery (23A / 12V).
Need to clear all paired remote controlsIn standby mode (red light on, motor not rotating), press and hold the "STOP" button on the receiver for approximately 5 seconds after the red light turns off. The red light will flash three times, indicating all paired codes are eliminated. Note: After clearing, the controller will enter learning mode. If no new remote is paired within 5-10 seconds, it will exit learning mode.

User Tips

  • Multiple Remotes: The intelligent learning receiver supports pairing with multiple remote controls. If you wish to use more than one remote, follow the "Remote Control Pairing" steps for each additional remote.

Warranty and Support

This product comes with a three-year warranty. During this period, the product will be repaired or replaced free of charge if damage occurs due to non-human factors or improper installation. Please retain your proof of purchase.

For further assistance or inquiries, please refer to the official product page or contact the seller directly.

View User Manual (PDF)


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.