morayelec ME201WSP

Contents

Morayelec ME201WSP Wireless Solar Powered Liquid Level Monitor User Manual

Model: ME201WSP | Brand: morayelec

1. Introduction

The Morayelec ME201WSP is a high-performance wireless liquid level monitoring device designed for water and fuel tanks. Utilizing advanced ultrasonic sensor technology, it provides unattended, automatic, and high-precision liquid level detection. This device integrates seamlessly with the Tuya Smart APP or Smart Life APP, offering intelligent remote monitoring capabilities. Its simple design ensures ease of installation and use, making it an ideal solution for comprehensive tank level management.

Morayelec ME201WSP product overview with app interface and solar charging
Figure 1: Morayelec ME201WSP Product Overview with App Interface and Solar Charging

2. Key Features

  • Wireless Connectivity: Operates on 2.4G WiFi for remote monitoring.
  • Solar Powered: Equipped with a solar panel and 3.6V@3600mAh battery for sustainable operation.
  • Smart APP Integration: Compatible with Tuya Smart APP and Smart Life APP for real-time data and control.
  • High-Precision Ultrasonic Measurement: Accurately detects liquid levels from 0.1m to 4m.
  • Real-time Monitoring: Provides continuous updates on liquid level ratio, depth, and status.
  • Customizable Alarms: Set high and low-level alarms based on height or percentage, with instant notifications.
  • IP65 Protection: Durable design suitable for outdoor and challenging environments.
  • Optional Pump Control: Can be integrated to control a pump for automatic refilling or draining.
  • Multi-Tank Monitoring: Monitor multiple sensors from a single app interface.

3. Specifications

AttributeValue
Model NumberME201WS
Brand Namemorayelec
DIY SuppliesPlumbing
OriginMainland China
WiFi2.4G
Input PowerSolar Power 5V (3.6V@3600mAh battery)
Max Detection Level4m
Detection Range0.1m to 4m
Protection RatingIP65
Battery IncludedYes
Sensor DiameterØ55.0 mm (for mounting hole)

4. Safety Information

  • Ensure the sensor is installed in a stable location to prevent accidental dislodgement.
  • Do not expose the device to extreme temperatures or corrosive substances beyond its IP65 rating.
  • Handle the solar panel with care to avoid damage.
  • Keep the sensor's detection surface clean and free from obstructions for accurate readings.
  • Only use the specified power input (Solar Power 5V) or a compatible AC/DC adapter if provided for initial setup or backup.

5. Setup Guide

5.1. Product Installation

  1. In the center of the tank, paste a 3M installation mark to indicate the sensor's position.
  2. Drill a hole with a diameter of 55mm precisely in the middle of the marked area.
  3. Place the sensor over the drilled hole, ensuring it is centered and the ultrasonic probe is unobstructed.
  4. Fasten the sensor securely using self-tapping screws.
Diagram showing the four steps of sensor installation on a tank
Figure 2: Sensor Installation Steps
Diagram showing sensor dimensions and a 55mm mounting hole diameter
Figure 3: Sensor Dimensions and Mounting Hole

Important Installation Notes:

  • Ensure the sensor is held perpendicular to the liquid surface.
  • Install the sensor away from the water inlet to avoid pseudo-echoes.
  • The sensor installation should not be too close to the tank bulkhead, as this can cause strong pseudo-echoes.
  • There should be no obstacles in the reflective area of the sensor for accurate readings. Refer to the diagram below for recommended tank dimensions based on detection height.
Diagram illustrating proper sensor placement, avoiding obstacles, and recommended tank dimensions for reflection area
Figure 4: Sensor Placement Guidelines and Reflection Area

5.2. App Pairing Steps

  1. Power on the sensor. If using an AC/DC adapter for initial setup, connect it first. Otherwise, ensure the solar panel is receiving light to charge the internal battery.
  2. Scan the QR code (if provided in packaging) or search for “TUYA Smart APP” or “Smart Life APP” in your mobile device's app store and download it.
  3. Network Reset: Press and hold the button on the sensor for 5 seconds. The LED light will flash rapidly. Release the button, and the device will enter network reset mode and attempt to connect automatically.
  4. Connecting Sensors to APP:
    • Open your mobile phone's WiFi settings and ensure Bluetooth is enabled.
    • Open the Tuya Smart or Smart Life app.
    • Tap 'Add Device' (usually a '+' icon). The app should automatically discover the ME201W Level Sensor.
    • Select the discovered device.
    • Enter your WiFi network password when prompted.
    • Once connected, click on the device in the app to enter the liquid level interface.
Screenshots showing initial app pairing steps: opening WiFi, adding device via Bluetooth, and connecting the sensor
Figure 5: Initial App Pairing Steps
Screenshots showing detailed app pairing steps: entering WiFi password, confirming device added, and entering the liquid level interface
Figure 6: Detailed App Pairing Steps

6. Operation

6.1. Monitoring Liquid Level

Once connected, the app will display real-time information about your tank's liquid level, including liquid level ratio, liquid level depth, and current status (Normal, Full Alarm, Lower Alarm). You can view historical data over different periods (Day, Month, Year).

App interface showing normal, full alarm, and low alarm states for liquid level
Figure 7: App Interface with Alarm States

6.2. Setting Alarms

The ME201WSP allows for free setting of alarm heights to suit your needs. You can configure alarms based on:

  • Installation Height: This is the distance from the sensor to the tank bottom. Set this accurately for correct depth calculations.
  • Maximum Water Level (High Level Alarm): Set a threshold for when the tank is too full.
  • Minimum Water Level (Low Level Alarm): Set a threshold for when the tank is too empty.
  • Percentage of Water Level: Configure alarms based on a percentage of the tank's capacity.

When a threshold is exceeded, the app will trigger an alarm and send a message notification to your mobile device.

App interface showing alarm height settings and notification examples
Figure 8: Alarm Settings and Notifications

6.3. Optional Pump Control

The ME201WSP can be integrated with a pump for automated liquid management. The pump working mode is set to 'Refilling' by default, meaning it will activate to fill the tank when the liquid level drops below a set minimum. This feature requires additional compatible hardware (e.g., a smart relay) and proper wiring.

Diagram illustrating the optional pump control setup with the sensor and app
Figure 9: Optional Pump Control Diagram

6.4. Multi-Tank Monitoring

The Tuya Smart or Smart Life app allows you to add and monitor multiple ME201WSP sensors, providing a comprehensive overview of all your tanks from a single interface.

App interface showing multiple ME201W Level Sensors for multi-tank monitoring
Figure 10: Multi-Tank Monitoring in App
Video 1: Morayelec ME201WSP Liquid Level Monitoring Demonstration

7. Maintenance

  • Sensor Cleaning: Periodically inspect the sensor's ultrasonic probe for any dirt, debris, or buildup that might obstruct its operation. Clean gently with a soft, damp cloth.
  • Solar Panel Care: Ensure the solar panel is clean and free from dust, leaves, or other obstructions to maximize charging efficiency. Wipe it regularly with a soft cloth.
  • Battery Health: The internal battery is charged by the solar panel. Ensure the sensor receives adequate sunlight. If the device is stored for extended periods, occasional charging might be necessary.
  • Firmware Updates: Check the Tuya Smart or Smart Life app periodically for any available firmware updates for your sensor to ensure optimal performance and access to new features.

8. Troubleshooting

  • No Data in App:
    • Check if the sensor is powered on and the battery is charged (solar panel receiving light).
    • Verify your WiFi network is active and the sensor is within range.
    • Perform a network reset on the sensor and re-pair with the app.
  • Inaccurate Readings:
    • Ensure there are no physical obstacles (pipes, floating objects, rough surfaces) directly beneath the sensor that could interfere with the ultrasonic beam.
    • Confirm the sensor is installed perpendicularly to the liquid surface and not too close to tank walls.
    • Verify the 'Installation Height' setting in the app is correct.
  • No Alarm Notifications:
    • Check your alarm settings in the Tuya Smart/Smart Life app to ensure thresholds are correctly configured.
    • Ensure app notifications are enabled on your mobile device for the Tuya Smart/Smart Life app.
    • Verify the sensor has a stable internet connection.
  • Sensor Not Charging:
    • Ensure the solar panel is clean and exposed to direct sunlight.
    • Check for any physical damage to the solar panel or its connection.

9. User Tips

  • For optimal performance, ensure your WiFi network is strong and stable at the sensor's installation location. Users have reported fast connection speeds and wide coverage with proper setup.
  • Regularly check the app for monitoring reminders and accurate water level measurements, which are key benefits highlighted by users.
  • Consider the optional pump control feature for automated tank management, especially for refilling systems.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.