VDIAGTOOL VT600 Elite Car Diagnostic Scanner User Manual

1. Product Overview

The VDIAGTOOL VT600 Elite (VT600e) is a newly upgraded car diagnostic scanner designed to provide comprehensive diagnostic and service functions for various vehicle systems. It features advanced hardware and software capabilities, making it an ideal tool for DIY enthusiasts, home mechanics, and small repair shops.

Key features include:

• 4-System Diagnostics: Engine, Transmission, ABS, and SRS.
• Full OBDII Functions: 10 modes for accurate engine troubleshooting.
• 19+ Hot Service Functions: Including Oil Reset, EPB, BRT, TPS, DPF, SAS, Immobilizer, and more.
• Printable Diagnostic Reports.
• Vast Vehicle Coverage: Supports over 78 car makes and 10,000+ models.
• Multi-language Support: 15 languages available.
• Lifetime Free Software Updates.

Figure 1: VDIAGTOOL VT600 Elite Diagnostic Scanner

2. Setup and Components

2.1 Package Contents

Upon opening the package, ensure all the following items are present:

• VDIAGTOOL VT600e Scanner (1 unit)
• User Manual (1 unit)
• Password Paper (1 unit)
• Diagnostic Cable (1 unit)
• 16 Pin OBDII Connector (1 unit)
• Card Reader (1 unit)
• Memory Card (1 unit)
• Tool Case (1 unit)
• Carton (1 unit)

Figure 2: Contents of the VDIAGTOOL VT600 Elite package

2.2 Device Layout

Familiarize yourself with the main components and controls of the VT600e scanner:

Figure 3: VDIAGTOOL VT600 Elite device layout showing function keys, selection keys, ESC, OK, Help, DC Power Input Jack, Diagnostic Connector, and TF Card slot.

• Function Keys/Shortcut Keys (F1, F2, F3): Used for quick access to specific functions or menu navigation.
• Selection Keys (Up, Down, Left, Right Arrows): For navigating through menus and options on the screen.
• OK Key: Confirms selections or actions.
• ESC Key: Returns to the previous screen or cancels an operation.
• Help Key (?): Provides contextual help or information.
• TF Card Slot: For inserting the memory card, primarily used for software updates.
• DC Power Input Jack: For external power supply if needed, though typically powered via OBDII.
• Diagnostic Connector: Connects to the vehicle's OBDII port via the diagnostic cable.

2.3 Initial Connection to Vehicle

To begin diagnostics, connect the VT600e scanner to your vehicle:

1. Locate your vehicle's OBDII port, usually found under the dashboard on the driver's side.
2. Connect the 16 Pin OBDII Connector to the diagnostic cable.
3. Plug the diagnostic cable into the Diagnostic Connector port on the VT600e scanner.
4. Connect the 16 Pin OBDII Connector to your vehicle's OBDII port.
5. Turn the vehicle's ignition to the 'ON' position (engine can be off or running, depending on the test).
6. The scanner will power on automatically and display the main menu.

3. Operating Instructions

3.1 Main Menu Navigation

Use the Selection Keys (arrows) to highlight desired options and the OK key to confirm. The ESC key will take you back to the previous screen.

3.2 4-System Diagnostics

The VT600e supports in-depth diagnostics for the following critical vehicle systems:

• Engine System: Detects issues related to ignition, fuel injection, air/fuel ratio, and exhaust emissions.
• Anti-Lock Braking System (ABS): Diagnoses problems within the ABS system by retrieving codes and checking component status.
• Supplemental Restraint System (SRS): Checks the health status of airbags, impact sensors, and the control module.
• Transmission System: Identifies issues with gear shifting and transmission performance.

Figure 4: Visual representation of the four major systems supported: SRS (airbags), ABS (brake system), Engine, and Transmission.

3.3 Full OBDII Functions

The scanner supports all 10 modes of OBDII tests for comprehensive engine diagnostics:

• Read and Clear DTCs: View detailed descriptions of Diagnostic Trouble Codes (DTCs) and clear/reset them to turn off the Malfunction Indicator Light (MIL).
• Read I/M Readiness Status: Checks if emission-related systems are operating normally and ready for inspection.
• Read Live Data Stream: Displays continuous data from vehicle sensors in real-time, with graphical (waveform) and text displays.
• Read Freeze Frame Data: Captures vehicle conditions at the moment an emission-related fault occurred.
• O2 Sensor Test: Displays the final test results for O2 sensors.
• On-Board Monitor Test: Reads diagnostic monitoring test results for specific components/systems.
• Read Vehicle Information: Displays VIN (Vehicle Identification Number), CID (Calibration ID), and CVN (Calibration Verification Number).
• Component Test: Actuates certain vehicle components via commands from the scanner to test their functionality.

Figure 5: Icons representing the full OBD2 functions including Read Codes, Erase Codes, Live Data, Freeze Frame, O2 Sensor Test, I/M Readiness, EVAP System Test, On-Board Monitor Test, PC Printing, and VIN Information.

3.4 Special Functions (19+ Reset Services)

The VT600e offers a wide range of special service functions:

• BRT (Battery Replacement): Validates new battery, clears dashboard faults, and displays battery information.
• Oil Light Service/Reset: Resets service lamps to indicate when the vehicle is due for service.
• EPB (Electronic Parking Brake): Performs service and maintenance of brake systems, including deactivation/activation, bleeding brake fluid, and setting brakes after pad replacement.
• TPS (Throttle Body Alignment): Allows the ECU to learn the full open and closed positions of the throttle body.
• Ajuste A/F (Air/Fuel Adjustment): Changes fuel supply to maintain energy balance in the combustion process.
• DPF (Diesel Particulate Filter Regeneration): Clears DPF blockage through continuous burning of captured particulates.
• Injector Coding: Resets and matches data after injector replacement.
• SAS (Steering Angle Sensor Reset): Performs calibration of the Steering Angle Sensor.
• Immobilizer Programming: Programs the immobilizer for enhanced vehicle security.
• Gear Learn: Performs crankshaft position sensor adaptive learning.
• ABS Bleed: Bleeds ABS brakes to achieve a firm brake pedal after air exhaustion.
• TPMS (Tire Pressure Monitoring System): Checks tire sensor IDs and performs TPMS programming/reset after tire/sensor replacement or rotation.
• Odometer Correction: Corrects odometer readings.
• Sun Roof Initialization: Initializes sunroof settings.
• Gear Box Match: Matches gearbox components.
• Suspension Match: Matches suspension components.
• AFS (Adaptive Front Lighting System): Adapts front lighting system settings.
• And more, including Head Light, Seat Match, Clutch Adaptation, Windows Door, Turbo, Prime Fuel pump, Air Bag, AT Adaption, Change Tire Size, EVAP Test, EGR Reset, TCM Oil Reset.

Figure 6: Icons representing the 19 special series functions including SRS, SAS, Injector Coding, Immobilizer, Gear Learn, ABS & SRS, BRT, Oil Reset, EPB, TPS, Ajuste A/F, DPF, ABS Bleed, TPMS, Odometer, Sun Roof, Gear Box, Suspension, and AFS.

3.5 Live Data Stream and Reporting

The VT600e allows you to view live vehicle sensor data. You can display two parameter graphs simultaneously and merge them for comparative analysis, providing a comprehensive view of live data.

Diagnostic reports can be generated with a single click and printed via a PC connection. This allows for easy sharing of vehicle health information.

Figure 7: Screenshot of the live data stream display, showing two parameters graphed simultaneously.

Figure 8: Image showing the VT600e connected to a PC and printer, demonstrating the ability to print diagnostic reports.

4. Maintenance

4.1 Software Update

The VT600e offers lifetime free software updates to ensure compatibility with new vehicle models and diagnostic functions. Follow these steps to update your device:

1. Connect the USB cable from the scanner to your computer/laptop.
2. Remove the memory card from your VT600e device.
3. Insert the memory card into the provided card reader, then plug the card reader into your computer/laptop.
4. Register an account on the VDIAGTOOL website (you can use your email address).
5. On the update software, select the serial number of your machine.
6. Click the download button to download the latest software.
7. After installation, all function files will appear. Click "Update All" to complete the process.

Figure 9: Illustration of the lifetime free update process, showing the scanner connected to a laptop for upgrade.

4.2 Care and Storage

• Keep the device clean and free from dust and moisture.
• Store the scanner in its protective tool case when not in use.
• Avoid exposing the device to extreme temperatures or direct sunlight.
• Do not attempt to disassemble or repair the device yourself, as this may void the warranty.

5. Troubleshooting

If you encounter issues with your VDIAGTOOL VT600e, consider the following common solutions:

• Device not powering on: Ensure the diagnostic cable is securely connected to both the vehicle's OBDII port and the scanner. Verify the vehicle's ignition is in the 'ON' position.
• Communication errors: Check all cable connections. Ensure the vehicle's battery has sufficient charge. Try connecting to a different vehicle to rule out a vehicle-specific issue.
• Software freezing/unresponsive: Restart the device. Ensure the software is up-to-date.
• Inaccurate readings: Ensure the correct vehicle make, model, and year are selected in the scanner's menu. Check for any pending software updates.

For persistent issues, refer to the official VDIAGTOOL support resources or contact customer service.

6. Specifications

Figure 10: Detailed technical specifications for the VT600 Elite.

7. User Tips

• Check Vehicle Compatibility: Before attempting specific diagnostic or reset functions, always verify the compatibility of the VT600e with your vehicle's make, model, and year for that particular function. Not all functions are universally supported across all vehicles.
• Keep Software Updated: Regularly update the scanner's software to ensure access to the latest vehicle databases and diagnostic features.
• Save Diagnostic Reports: Utilize the print function to keep records of diagnostic reports for future reference or sharing with mechanics.

8. Warranty and Support

The VDIAGTOOL VT600e comes with a 3-year warranty, 3 years of free software updates, and lifetime technical support. For any inquiries or assistance, please refer to the official VDIAGTOOL support channels.